Linux-PHY Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Hongliang Yang (杨宏亮)" <hongliang.yang@cixtech.com>
Cc: "linux-phy@lists.infradead.org" <linux-phy@lists.infradead.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	robh@kernel.org, conor+dt@kernel.org, vkoul@kernel.org,
	neil.armstrong@linaro.org, olteanv@gmail.com
Subject: Re: [PATCH v5 2/3] phy: cix: Add CIX Sky1 USB3 PHY driver
Date: Tue, 03 Nov 2026 07:58:45 +0000	[thread overview]
Message-ID: <sashiko-outbox-194780@kernel.org> (raw)
In-Reply-To: <20261103074913.1971025-3-hongliang.yang@cixtech.com>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] phy: cix: missing select REGMAP for PHY_CIX_USB3 in Kconfig
--

commit d964298ad6351b3e6e7c48b5d622d1449937080f
Author: Hongliang Yang (杨宏亮) <hongliang.yang@cixtech.com>

phy: cix: Add CIX Sky1 USB3 PHY driver

This commit adds a PHY driver for the multi-port Cadence SD0803 USB3 PHY found
on CIX Sky1 SoCs, handling initialization, reset, and clock management.

> diff --git a/drivers/phy/cix/Kconfig b/drivers/phy/cix/Kconfig
> new file mode 100644
> index 0000000000000..aaa2eb9d45527
> --- /dev/null
> +++ b/drivers/phy/cix/Kconfig
> @@ -0,0 +1,20 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Phy drivers for Cix PHYs
> +#
> +
> +if ARCH_CIX || COMPILE_TEST
> +
> +config PHY_CIX_USB3
> +	tristate "Cix USB3 PHY Driver"
> +	depends on OF && HAS_IOMEM
> +	select GENERIC_PHY

[Severity: Low]
Does PHY_CIX_USB3 in drivers/phy/cix/Kconfig also need to select REGMAP?

In drivers/phy/cix/phy-cix-usb3.c, the driver defines cix_u3phy_regmap_cfg as
struct regmap_config, calls regmap_multi_reg_write() in sky1_u3phy_init(), and
calls devm_regmap_init() in cix_u3phy_probe():

drivers/phy/cix/phy-cix-usb3.c:sky1_u3phy_init() {
	...
		ret = regmap_multi_reg_write(u3phy->phy_regmap, sky1_u3phy_conf,
					     ARRAY_SIZE(sky1_u3phy_conf));
	...
}

drivers/phy/cix/phy-cix-usb3.c:cix_u3phy_probe() {
	...
	u3phy->phy_regmap = devm_regmap_init(dev, NULL, u3phy, &cix_u3phy_regmap_cfg);
	...
}

In include/linux/regmap.h, struct regmap_config, devm_regmap_init(), and
regmap_multi_reg_write() are guarded by CONFIG_REGMAP without fallback stubs
when CONFIG_REGMAP is disabled. If CONFIG_PHY_CIX_USB3 is enabled in a
configuration where no other option selects REGMAP, building phy-cix-usb3.o
will fail due to an incomplete struct regmap_config type and implicit function
declarations.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261103074913.1971025-1-hongliang.yang@cixtech.com?part=2

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  reply	other threads:[~2026-11-03  7:58 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-03  7:49 [PATCH v5 0/3] phy: Add CIX Sky1 USB3 PHY support Hongliang Yang (杨宏亮)
2026-11-03  7:49 ` [PATCH v5 1/3] dt-bindings: phy: Add CIX Sky1 USB3 PHY Hongliang Yang (杨宏亮)
2026-11-04 10:33   ` Krzysztof Kozlowski
2026-11-04 10:33   ` Krzysztof Kozlowski
2026-11-03  7:49 ` [PATCH v5 2/3] phy: cix: Add CIX Sky1 USB3 PHY driver Hongliang Yang (杨宏亮)
2026-11-03  7:58   ` sashiko-bot [this message]
2026-11-03  8:44   ` Philipp Zabel
2026-11-03  7:49 ` [PATCH v5 3/3] arm64: dts: cix: Add USB3 PHY nodes for Sky1 Hongliang Yang (杨宏亮)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-194780@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hongliang.yang@cixtech.com \
    --cc=linux-phy@lists.infradead.org \
    --cc=neil.armstrong@linaro.org \
    --cc=olteanv@gmail.com \
    --cc=robh@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox