From: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
To: Stewart Smith <stewart@linux.ibm.com>,
rjw@rjwysocki.net, viresh.kumar@linaro.org
Cc: npiggin@gmail.com, benh@kernel.crashing.org, mpe@ellerman.id.au,
linux-pm@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org, ppaidipe@linux.vnet.ibm.com,
svaidy@linux.vnet.ibm.com
Subject: Re: [PATCH] cpufreq: powernv: Fix the hardlockup by synchronus smp_call in timer interrupt
Date: Tue, 24 Apr 2018 10:54:18 +0530 [thread overview]
Message-ID: <03d2cbd2-eae7-3eae-dc2a-6b3f3266accc@linux.vnet.ibm.com> (raw)
In-Reply-To: <87y3hdb36b.fsf@linux.vnet.ibm.com>
Hi,
On 04/24/2018 10:40 AM, Stewart Smith wrote:
> Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> writes:
>> gpstate_timer_handler() uses synchronous smp_call to set the pstate
>> on the requested core. This causes the below hard lockup:
>>
>> [c000003fe566b320] [c0000000001d5340] smp_call_function_single+0x110/0x180 (unreliable)
>> [c000003fe566b390] [c0000000001d55e0] smp_call_function_any+0x180/0x250
>> [c000003fe566b3f0] [c000000000acd3e8] gpstate_timer_handler+0x1e8/0x580
>> [c000003fe566b4a0] [c0000000001b46b0] call_timer_fn+0x50/0x1c0
>> [c000003fe566b520] [c0000000001b4958] expire_timers+0x138/0x1f0
>> [c000003fe566b590] [c0000000001b4bf8] run_timer_softirq+0x1e8/0x270
>> [c000003fe566b630] [c000000000d0d6c8] __do_softirq+0x158/0x3e4
>> [c000003fe566b710] [c000000000114be8] irq_exit+0xe8/0x120
>> [c000003fe566b730] [c000000000024d0c] timer_interrupt+0x9c/0xe0
>> [c000003fe566b760] [c000000000009014] decrementer_common+0x114/0x120
>> --- interrupt: 901 at doorbell_global_ipi+0x34/0x50
>> LR = arch_send_call_function_ipi_mask+0x120/0x130
>> [c000003fe566ba50] [c00000000004876c] arch_send_call_function_ipi_mask+0x4c/0x130 (unreliable)
>> [c000003fe566ba90] [c0000000001d59f0] smp_call_function_many+0x340/0x450
>> [c000003fe566bb00] [c000000000075f18] pmdp_invalidate+0x98/0xe0
>> [c000003fe566bb30] [c0000000003a1120] change_huge_pmd+0xe0/0x270
>> [c000003fe566bba0] [c000000000349278] change_protection_range+0xb88/0xe40
>> [c000003fe566bcf0] [c0000000003496c0] mprotect_fixup+0x140/0x340
>> [c000003fe566bdb0] [c000000000349a74] SyS_mprotect+0x1b4/0x350
>> [c000003fe566be30] [c00000000000b184] system_call+0x58/0x6c
>>
>> Fix this by using the asynchronus smp_call in the timer interrupt handler.
>> We don't have to wait in this handler until the pstates are changed on
>> the core. This change will not have any impact on the global pstate
>> ramp-down algorithm.
>>
>> Reported-by: Nicholas Piggin <npiggin@gmail.com>
>> Reported-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com>
>> Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
>> ---
>> drivers/cpufreq/powernv-cpufreq.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
>> index 0591874..7e0c752 100644
>> --- a/drivers/cpufreq/powernv-cpufreq.c
>> +++ b/drivers/cpufreq/powernv-cpufreq.c
>> @@ -721,7 +721,7 @@ void gpstate_timer_handler(struct timer_list *t)
>> spin_unlock(&gpstates->gpstate_lock);
>>
>> /* Timer may get migrated to a different cpu on cpu hot unplug */
>> - smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1);
>> + smp_call_function_any(policy->cpus, set_pstate, &freq_data, 0);
>> }
>
> Should this have:
> Fixes: eaa2c3aeef83f
> and CC stable v4.7+ ?
>
Yeah this is required.
Fixes: eaa2c3aeef83 (cpufreq: powernv: Ramp-down global pstate slower than
local-pstate)
Thanks and Regards,
Shilpa
next prev parent reply other threads:[~2018-04-24 5:24 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-24 4:41 [PATCH] cpufreq: powernv: Fix the hardlockup by synchronus smp_call in timer interrupt Shilpasri G Bhat
2018-04-24 5:10 ` Stewart Smith
2018-04-24 5:24 ` Shilpasri G Bhat [this message]
2018-04-24 6:00 ` Nicholas Piggin
2018-04-24 7:17 ` Shilpasri G Bhat
2018-04-24 7:31 ` Nicholas Piggin
2018-04-24 10:47 ` Shilpasri G Bhat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=03d2cbd2-eae7-3eae-dc2a-6b3f3266accc@linux.vnet.ibm.com \
--to=shilpa.bhat@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=ppaidipe@linux.vnet.ibm.com \
--cc=rjw@rjwysocki.net \
--cc=stewart@linux.ibm.com \
--cc=svaidy@linux.vnet.ibm.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox