From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Nigel Cunningham <ncunningham@cyclades.com>
Cc: Andrew Morton <akpm@osdl.org>, Linux PM <linux-pm@osdl.org>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] Complain if driver reenables interrupts during drivers_[suspend|resume] & re-disable
Date: Wed, 08 Feb 2006 14:47:38 +1100 [thread overview]
Message-ID: <1139370459.5252.21.camel@localhost.localdomain> (raw)
In-Reply-To: <200602071906.55281.ncunningham@cyclades.com>
[-- Attachment #1: Type: text/plain, Size: 4952 bytes --]
On Tue, 2006-02-07 at 19:06 +1000, Nigel Cunningham wrote:
> Hi all.
>
> This patch is designed to help with diagnosing and fixing the cause of
> problems in suspending/resuming, due to drivers wrongly re-enabling
> interrupts in their .suspend or .resume methods.
>
> I nearly forgot about it in sending patches in suspend2 that might help
> where swsusp fails.
Ugh ? Interrupts aren't supposed to be off during resume()...
Ben.
> Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
>
> power/resume.c | 5 +++++
> power/suspend.c | 5 +++++
> sys.c | 37 +++++++++++++++++++++++++++++++++++--
> 3 files changed, 45 insertions(+), 2 deletions(-)
> diff -ruNp 8010-driver-model-debug.patch-old/drivers/base/power/resume.c
> 8010-driver-model-debug.patch-new/drivers/base/power/resume.c
> --- 8010-driver-model-debug.patch-old/drivers/base/power/resume.c
> 2006-01-19 21:27:39.000000000 +1000
> +++ 8010-driver-model-debug.patch-new/drivers/base/power/resume.c
> 2006-01-31 19:54:52.000000000 +1000
> @@ -35,6 +35,11 @@ int resume_device(struct device * dev)
> if (dev->bus && dev->bus->resume) {
> dev_dbg(dev,"resuming\n");
> error = dev->bus->resume(dev);
> + if (!irqs_disabled()) {
> + printk(KERN_EMERG "WARNING: Interrupts reenabled while resuming device
> %s.\n",
> + kobject_name(&dev->kobj));
> + local_irq_disable();
> + }
> }
> up(&dev->sem);
> return error;
> diff -ruNp 8010-driver-model-debug.patch-old/drivers/base/power/suspend.c
> 8010-driver-model-debug.patch-new/drivers/base/power/suspend.c
> --- 8010-driver-model-debug.patch-old/drivers/base/power/suspend.c
> 2006-01-19 21:27:39.000000000 +1000
> +++ 8010-driver-model-debug.patch-new/drivers/base/power/suspend.c
> 2006-01-31 19:54:44.000000000 +1000
> @@ -58,6 +58,11 @@ int suspend_device(struct device * dev,
> if (dev->bus && dev->bus->suspend && !dev->power.power_state.event) {
> dev_dbg(dev, "suspending\n");
> error = dev->bus->suspend(dev, state);
> + if (!irqs_disabled()) {
> + printk(KERN_EMERG "WARNING: Interrupts reenabled while suspending
> device %s.\n",
> + kobject_name(&dev->kobj));
> + local_irq_disable();
> + }
> }
> up(&dev->sem);
> return error;
> diff -ruNp 8010-driver-model-debug.patch-old/drivers/base/sys.c
> 8010-driver-model-debug.patch-new/drivers/base/sys.c
> --- 8010-driver-model-debug.patch-old/drivers/base/sys.c 2006-01-19
> 21:27:39.000000000 +1000
> +++ 8010-driver-model-debug.patch-new/drivers/base/sys.c 2006-01-31
> 19:54:09.000000000 +1000
> @@ -298,16 +298,34 @@ static void __sysdev_resume(struct sys_d
> if (cls->resume)
> cls->resume(dev);
>
> + if (!irqs_disabled()) {
> + printk(KERN_EMERG "WARNING: Interrupts reenabled while resuming sysdev
> class specific driver %s.\n",
> + kobject_name(&dev->kobj));
> + local_irq_disable();
> + }
> +
> /* Call auxillary drivers next. */
> list_for_each_entry(drv, &cls->drivers, entry) {
> - if (drv->resume)
> + if (drv->resume) {
> drv->resume(dev);
> + if (!irqs_disabled()) {
> + printk(KERN_EMERG "WARNING: Interrupts reenabled while resuming sysdev
> class driver %s.\n",
> + kobject_name(&dev->kobj));
> + local_irq_disable();
> + }
> + }
> }
>
> /* Call global drivers. */
> list_for_each_entry(drv, &sysdev_drivers, entry) {
> - if (drv->resume)
> + if (drv->resume) {
> drv->resume(dev);
> + if (!irqs_disabled()) {
> + printk(KERN_EMERG "WARNING: Interrupts reenabled while resuming sysdev
> driver %s.\n",
> + kobject_name(&dev->kobj));
> + local_irq_disable();
> + }
> + }
> }
> }
>
> @@ -346,6 +364,11 @@ int sysdev_suspend(pm_message_t state)
> list_for_each_entry(drv, &sysdev_drivers, entry) {
> if (drv->suspend) {
> ret = drv->suspend(sysdev, state);
> + if (!irqs_disabled()) {
> + printk(KERN_EMERG "WARNING: Interrupts reenabled while suspending
> sysdev driver %s.\n",
> + kobject_name(&sysdev->kobj));
> + local_irq_disable();
> + }
> if (ret)
> goto gbl_driver;
> }
> @@ -355,6 +378,11 @@ int sysdev_suspend(pm_message_t state)
> list_for_each_entry(drv, &cls->drivers, entry) {
> if (drv->suspend) {
> ret = drv->suspend(sysdev, state);
> + if (!irqs_disabled()) {
> + printk(KERN_EMERG "WARNING: Interrupts reenabled while suspending
> sysdev class driver %s.\n",
> + kobject_name(&sysdev->kobj));
> + local_irq_disable();
> + }
> if (ret)
> goto aux_driver;
> }
> @@ -363,6 +391,11 @@ int sysdev_suspend(pm_message_t state)
> /* Now call the generic one */
> if (cls->suspend) {
> ret = cls->suspend(sysdev, state);
> + if (!irqs_disabled()) {
> + printk(KERN_EMERG "WARNING: Interrupts reenabled while suspending
> class driver %s.\n",
> + kobject_name(&sysdev->kobj));
> + local_irq_disable();
> + }
> if (ret)
> goto cls_driver;
> }
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
next prev parent reply other threads:[~2006-02-08 3:47 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-07 9:06 [PATCH] Complain if driver reenables interrupts during drivers_[suspend|resume] & re-disable Nigel Cunningham
2006-02-07 23:59 ` Russell King
2006-02-08 3:47 ` Benjamin Herrenschmidt [this message]
2006-02-08 5:40 ` Dmitry Torokhov
2006-02-08 6:46 ` Rafael J. Wysocki
2006-02-08 23:58 ` Nigel Cunningham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1139370459.5252.21.camel@localhost.localdomain \
--to=benh@kernel.crashing.org \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@osdl.org \
--cc=ncunningham@cyclades.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox