From: Johannes Berg <johannes@sipsolutions.net>
To: Olof Johansson <olof@lixom.net>
Cc: linuxppc-dev@ozlabs.org, linux-pm@lists.osdl.org,
Torrance <torrance123@gmail.com>
Subject: Re: [RFC 08/10] powerpc: dart iommu suspend
Date: Tue, 06 Feb 2007 02:52:47 +0100 [thread overview]
Message-ID: <1170726767.30959.30.camel@johannes.berg> (raw)
In-Reply-To: <20070206011949.GA15434@lixom.net>
How's this? Needs to go along with the correct changes in the code that
uses it, of course.
I can't use a local void * as you suggested because it needs to be added
to as an unsigned long, but I can use a local unsigned long.
Not even compiled yet.
Btw. What does TCE stand for?
--- mb-wireless.orig/arch/powerpc/sysdev/dart_iommu.c 2007-02-06 02:45:34.464524763 +0100
+++ mb-wireless/arch/powerpc/sysdev/dart_iommu.c 2007-02-06 02:48:40.784524763 +0100
@@ -54,6 +54,9 @@ static unsigned long dart_tablesize;
/* Virtual base address of the DART table */
static u32 *dart_vbase;
+#ifdef CONFIG_PM
+static u32 *dart_copy;
+#endif
/* Mapped base address for the dart */
static unsigned int __iomem *dart;
@@ -346,6 +349,49 @@ void iommu_init_early_dart(void)
pci_dma_ops = &dma_direct_ops;
}
+#ifdef CONFIG_PM
+static void iommu_dart_suspend(void)
+{
+ memcpy(dart_copy, dart_vbase, 2*1024*1024);
+}
+
+static void iommu_dart_restore(void)
+{
+ memcpy(dart_vbase, dart_copy, 2*1024*1024);
+ dart_tlb_invalidate_all();
+}
+
+static int iommu_init_late_dart(void)
+{
+ unsigned long i, tbase = (unsigned long) dart_tablebase;
+ struct page *p;
+
+ /* this 16MB area is left unmapped because of caching
+ * considerations. that happens early so we can't mark
+ * it there, do it now instead */
+ for (i = 0; i < (1<<24); i+= PAGE_SIZE)
+ SetPageNosave(virt_to_page((void*)(tbase + i)));
+
+ /* if no dart table exists then we don't need to save it */
+ if (!dart_tablebase)
+ return 0;
+
+ /* For suspend we need to copy the dart contents because
+ * it is not part of the regular mapping (see above) and
+ * thus not saved automatically. The memory for this copy
+ * must be allocated early because we need 2 MB. */
+ p = alloc_pages(GFP_KERNEL, 21 - PAGE_SHIFT);
+ BUG_ON(!p);
+ dart_copy = page_address(p);
+
+ ppc_md.iommu_suspend = iommu_dart_suspend;
+ ppc_md.iommu_resume = iommu_dart_resume;
+
+ return 0;
+}
+
+late_initcall(iommu_init_late_dart);
+#endif
void __init alloc_dart_table(void)
{
--- mb-wireless.orig/include/asm-powerpc/iommu.h 2007-02-06 02:45:34.524524763 +0100
+++ mb-wireless/include/asm-powerpc/iommu.h 2007-02-06 02:46:28.964524763 +0100
@@ -26,6 +26,7 @@
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <asm/machdep.h>
#include <asm/types.h>
#include <asm/bitops.h>
@@ -108,6 +109,19 @@ static inline void pci_iommu_init(void)
#endif
extern void alloc_dart_table(void);
+#ifdef CONFIG_PM
+static inline void iommu_suspend(void)
+{
+ if (ppc_md.iommu_suspend)
+ ppc_md.iommu_suspend();
+}
+
+static inline void iommu_restore(void)
+{
+ if (ppc_md.iommu_resume)
+ ppc_md.iommu_resume();
+}
+#endif
#endif /* __KERNEL__ */
#endif /* _ASM_IOMMU_H */
--- mb-wireless.orig/include/asm-powerpc/machdep.h 2007-02-06 02:45:34.584524763 +0100
+++ mb-wireless/include/asm-powerpc/machdep.h 2007-02-06 02:46:10.834524763 +0100
@@ -91,6 +91,11 @@ struct machdep_calls {
void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size,
unsigned long flags);
void (*iounmap)(volatile void __iomem *token);
+
+#ifdef CONFIG_PM
+ void (*iommu_suspend)(void);
+ void (*iommu_resume)(void);
+#endif
#endif /* CONFIG_PPC64 */
int (*probe)(void);
next prev parent reply other threads:[~2007-02-06 1:52 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-05 18:30 [PATCH/RFC 00/10] suspend to disk for powermac G5 Johannes Berg
2007-02-05 18:30 ` [PATCH 01/10] dont copy pages that arent RAM Johannes Berg
2007-02-05 18:30 ` [PATCH 02/10] windfarm: dont die on suspend thread signal Johannes Berg
2007-02-05 22:43 ` Christoph Hellwig
2007-02-05 22:54 ` [PATCH revision 2] " Johannes Berg
2007-02-05 23:04 ` Benjamin Herrenschmidt
2007-02-05 23:04 ` Benjamin Herrenschmidt
2007-02-05 22:54 ` [PATCH 02/10] " Andrew Morton
2007-02-05 22:55 ` Johannes Berg
2007-02-05 22:58 ` Benjamin Herrenschmidt
2007-02-05 18:30 ` [PATCH 03/10] powerpc: fix comment in kernel/irq.c Johannes Berg
2007-02-05 22:59 ` Benjamin Herrenschmidt
2007-02-05 23:18 ` Andrew Morton
2007-02-05 23:53 ` Benjamin Herrenschmidt
2007-02-05 18:30 ` [PATCH 04/10] powermac: clean up PIC initialisation code Johannes Berg
2007-02-08 4:41 ` Paul Mackerras
2007-02-08 13:03 ` Johannes Berg
2007-02-05 18:30 ` [PATCH 05/10] powermac: generic time suspend/resume code Johannes Berg
2007-02-19 10:00 ` Guennadi Liakhovetski
2007-02-19 23:19 ` Guennadi Liakhovetski
2007-02-05 18:30 ` [RFC 06/10] powerpc: MPIC sys_device & suspend/resume Johannes Berg
2007-02-07 12:24 ` Johannes Berg
2007-02-05 18:30 ` [RFC 07/10] powermac: support G5 CPU hotplug Johannes Berg
2007-02-06 12:42 ` Pavel Machek
2007-02-07 11:40 ` [linux-pm] " Johannes Berg
2007-02-07 12:23 ` Johannes Berg
2007-02-05 18:30 ` [RFC 08/10] powerpc: dart iommu suspend Johannes Berg
2007-02-06 1:19 ` Olof Johansson
2007-02-06 1:26 ` Johannes Berg
2007-02-06 1:52 ` Johannes Berg [this message]
2007-02-07 12:22 ` Johannes Berg
2007-02-06 12:40 ` Pavel Machek
2007-02-07 11:42 ` Johannes Berg
2007-02-05 18:30 ` [RFC 09/10] powermac: suspend to disk on G5 Johannes Berg
2007-02-05 18:30 ` [RFC 10/10] powermac: fix G5-cpufreq for cpu on/offline Johannes Berg
2007-02-07 12:21 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1170726767.30959.30.camel@johannes.berg \
--to=johannes@sipsolutions.net \
--cc=linux-pm@lists.osdl.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=olof@lixom.net \
--cc=torrance123@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox