[PATCH] power management: change /sys/power/disk display

[Johannes Berg <johannes@sipsolutions.net>]

This patch changes /sys/power/disk to display all valid modes
as well as the currently selected one in a fashion known from
the LED subsystem.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>

---
This changes userspace API, but it is apparently not used much (we asked
some userspace developers)

 Documentation/power/interface.txt |    8 ++++++--
 kernel/power/disk.c               |   34 +++++++++++++++++++++++++++++++---
 2 files changed, 37 insertions(+), 5 deletions(-)

--- wireless-dev.orig/kernel/power/disk.c	2007-04-11 18:01:08.389481358 +0200
+++ wireless-dev/kernel/power/disk.c	2007-04-11 18:01:10.109481358 +0200
@@ -322,7 +322,34 @@ static const char * const pm_disk_modes[
 
 static ssize_t disk_show(struct subsystem * subsys, char * buf)
 {
-	return sprintf(buf, "%s\n", pm_disk_modes[pm_disk_mode]);
+	int i;
+	char *start = buf;
+
+	for (i = PM_DISK_PLATFORM; i < PM_DISK_MAX; i++) {
+		if (!pm_disk_modes[i])
+			continue;
+		switch (i) {
+		case PM_DISK_SHUTDOWN:
+		case PM_DISK_REBOOT:
+		case PM_DISK_TEST:
+		case PM_DISK_TESTPROC:
+			break;
+		default:
+			if (pm_ops && pm_ops->enter &&
+			    (i == pm_ops->pm_disk_mode))
+				break;
+			/* not a valid mode, continue with loop */
+			continue;
+		}
+		if (i == pm_disk_mode)
+			buf += sprintf(buf, "[%s]", pm_disk_modes[i]);
+		else
+			buf += sprintf(buf, "%s", pm_disk_modes[i]);
+		if (i+1 != PM_DISK_MAX)
+			buf += sprintf(buf, " ");
+	}
+	buf += sprintf(buf, "\n");
+	return buf-start;
 }
 
 
@@ -363,8 +390,9 @@ static ssize_t disk_store(struct subsyst
 		error = -EINVAL;
 	}
 
-	pr_debug("PM: suspend-to-disk mode set to '%s'\n",
-		 pm_disk_modes[mode]);
+	if (!error)
+		pr_debug("PM: suspend-to-disk mode set to '%s'\n",
+			 pm_disk_modes[mode]);
 	mutex_unlock(&pm_mutex);
 	return error ? error : n;
 }
--- wireless-dev.orig/Documentation/power/interface.txt	2007-04-11 18:01:08.389481358 +0200
+++ wireless-dev/Documentation/power/interface.txt	2007-04-11 18:01:10.109481358 +0200
@@ -34,8 +34,12 @@ for 5 seconds, resume devices, unfreeze 
 we are able to look in the log messages and work out, for example, which code
 is being slow and which device drivers are misbehaving.
 
-Reading from this file will display what the mode is currently set
-to. Writing to this file will accept one of
+Reading from this file will display all supported modes and the currently
+selected one in brackets, for example
+
+	[shutdown] reboot test testproc
+
+Writing to this file will accept one of
 
        'platform' (only if the platform supports it)
        'shutdown'