Linux Power Management development
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@rjwysocki.net>
To: Linux PM <linux-pm@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: [PATCH] PM: runtime: Add safety net to supplier device release
Date: Fri, 10 Dec 2021 17:10:13 +0100	[thread overview]
Message-ID: <11889065.O9o76ZdvQC@kreacher> (raw)

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Because refcount_dec_not_one() returns true if the target refcount
becomes saturated, it is generally unsafe to use its return value as
a loop termination condition, but that is what happens when a device
link's supplier device is released during runtime PM suspend
operations and on device link removal.

To address this, introduce pm_runtime_release_supplier() to be used
in the above cases which will check the supplier device's runtime
PM usage counter in addition to the refcount_dec_not_one() return
value, so the loop can be terminated in case the rpm_active refcount
value becomes invalid, and update the code in question to use it as
appropriate.

This change is not expected to have any visible functional impact.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/base/core.c          |    3 +--
 drivers/base/power/runtime.c |   41 ++++++++++++++++++++++++++++++-----------
 include/linux/pm_runtime.h   |    3 +++
 3 files changed, 34 insertions(+), 13 deletions(-)

Index: linux-pm/drivers/base/power/runtime.c
===================================================================
--- linux-pm.orig/drivers/base/power/runtime.c
+++ linux-pm/drivers/base/power/runtime.c
@@ -305,19 +305,40 @@ static int rpm_get_suppliers(struct devi
 	return 0;
 }
 
+/**
+ * pm_runtime_release_supplier - Drop references to device link's supplier.
+ * @link: Target device link.
+ * @check_idle: Whether or not to check if the supplier device is idle.
+ *
+ * Drop all runtime PM references associated with @link to its supplier device
+ * and if @check_idle is set, check if that device is idle (and so it can be
+ * suspended).
+ */
+void pm_runtime_release_supplier(struct device_link *link, bool check_idle)
+{
+	struct device *supplier = link->supplier;
+
+	/*
+	 * The additional power.usage_count check is a safety net in case
+	 * the rpm_active refcount becomes saturated, in which case
+	 * refcount_dec_not_one() would return true forever, but it is not
+	 * strictly necessary.
+	 */
+	while (refcount_dec_not_one(&link->rpm_active) &&
+	       atomic_read(&supplier->power.usage_count) > 0)
+		pm_runtime_put_noidle(supplier);
+
+	if (check_idle)
+		pm_request_idle(supplier);
+}
+
 static void __rpm_put_suppliers(struct device *dev, bool try_to_suspend)
 {
 	struct device_link *link;
 
 	list_for_each_entry_rcu(link, &dev->links.suppliers, c_node,
-				device_links_read_lock_held()) {
-
-		while (refcount_dec_not_one(&link->rpm_active))
-			pm_runtime_put_noidle(link->supplier);
-
-		if (try_to_suspend)
-			pm_request_idle(link->supplier);
-	}
+				device_links_read_lock_held())
+		pm_runtime_release_supplier(link, try_to_suspend);
 }
 
 static void rpm_put_suppliers(struct device *dev)
@@ -1777,9 +1798,7 @@ void pm_runtime_drop_link(struct device_
 		return;
 
 	pm_runtime_drop_link_count(link->consumer);
-
-	while (refcount_dec_not_one(&link->rpm_active))
-		pm_runtime_put(link->supplier);
+	pm_runtime_release_supplier(link, true);
 }
 
 static bool pm_runtime_need_not_resume(struct device *dev)
Index: linux-pm/include/linux/pm_runtime.h
===================================================================
--- linux-pm.orig/include/linux/pm_runtime.h
+++ linux-pm/include/linux/pm_runtime.h
@@ -58,6 +58,7 @@ extern void pm_runtime_get_suppliers(str
 extern void pm_runtime_put_suppliers(struct device *dev);
 extern void pm_runtime_new_link(struct device *dev);
 extern void pm_runtime_drop_link(struct device_link *link);
+extern void pm_runtime_release_supplier(struct device_link *link, bool check_idle);
 
 extern int devm_pm_runtime_enable(struct device *dev);
 
@@ -283,6 +284,8 @@ static inline void pm_runtime_get_suppli
 static inline void pm_runtime_put_suppliers(struct device *dev) {}
 static inline void pm_runtime_new_link(struct device *dev) {}
 static inline void pm_runtime_drop_link(struct device_link *link) {}
+static inline void pm_runtime_release_supplier(struct device_link *link,
+					       bool check_idle) {}
 
 #endif /* !CONFIG_PM */
 
Index: linux-pm/drivers/base/core.c
===================================================================
--- linux-pm.orig/drivers/base/core.c
+++ linux-pm/drivers/base/core.c
@@ -485,8 +485,7 @@ static void device_link_release_fn(struc
 	/* Ensure that all references to the link object have been dropped. */
 	device_link_synchronize_removal();
 
-	while (refcount_dec_not_one(&link->rpm_active))
-		pm_runtime_put(link->supplier);
+	pm_runtime_release_supplier(link, true);
 
 	put_device(link->consumer);
 	put_device(link->supplier);




             reply	other threads:[~2021-12-10 16:10 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-10 16:10 Rafael J. Wysocki [this message]
2021-12-10 16:17 ` [PATCH] PM: runtime: Add safety net to supplier device release Greg Kroah-Hartman
2021-12-10 16:30 ` Peter Zijlstra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=11889065.O9o76ZdvQC@kreacher \
    --to=rjw@rjwysocki.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=peterz@infradead.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox