From: Amit Daniel Kachhap <amit.kachhap-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org,
linux-pm-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
Cc: linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org,
patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-acpi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
durgadoss.r-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
lenb-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Subject: [PATCH v3 6/6] ARM: exynos: Add thermal sensor driver platform data support
Date: Tue, 8 May 2012 21:48:18 +0530 [thread overview]
Message-ID: <1336493898-7039-7-git-send-email-amit.kachhap@linaro.org> (raw)
In-Reply-To: <1336493898-7039-6-git-send-email-amit.kachhap-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
This patch adds necessary default platform data support needed for TMU driver.
This dt/non-dt values are tested for origen exynos4210 and smdk exynos5250 platforms.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
drivers/thermal/exynos_thermal.c | 107 +++++++++++++++++++++++++++++++++++++-
1 files changed, 106 insertions(+), 1 deletions(-)
diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
index f818432..3471d9d 100644
--- a/drivers/thermal/exynos_thermal.c
+++ b/drivers/thermal/exynos_thermal.c
@@ -646,14 +646,117 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id)
static struct thermal_sensor_conf exynos_sensor_conf = {
.name = "exynos-therm",
.read_temperature = (int (*)(void *))exynos_tmu_read,
+};
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+static struct exynos_tmu_platform_data exynos4_default_tmu_data = {
+ .threshold = 80,
+ .trigger_levels[0] = 5,
+ .trigger_levels[1] = 20,
+ .trigger_levels[2] = 30,
+ .trigger_level0_en = 1,
+ .trigger_level1_en = 1,
+ .trigger_level2_en = 1,
+ .trigger_level3_en = 0,
+ .gain = 15,
+ .reference_voltage = 7,
+ .cal_type = TYPE_ONE_POINT_TRIMMING,
+ .freq_tab[0] = {
+ .freq_clip_max = 800 * 1000,
+ },
+ .freq_tab[1] = {
+ .freq_clip_max = 200 * 1000,
+ },
+ .freq_tab_count = 2,
+ .type = SOC_ARCH_EXYNOS4,
+};
+#define EXYNOS4_TMU_DRV_DATA ((kernel_ulong_t)&exynos4_default_tmu_data)
+#else
+#define EXYNOS4_TMU_DRV_DATA ((kernel_ulong_t)NULL)
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5250)
+static struct exynos_tmu_platform_data exynos5_default_tmu_data = {
+ .trigger_levels[0] = 85,
+ .trigger_levels[1] = 103,
+ .trigger_levels[2] = 110,
+ .trigger_level0_en = 1,
+ .trigger_level1_en = 1,
+ .trigger_level2_en = 1,
+ .trigger_level3_en = 0,
+ .gain = 8,
+ .reference_voltage = 16,
+ .noise_cancel_mode = 4,
+ .cal_type = TYPE_ONE_POINT_TRIMMING,
+ .efuse_value = 55,
+ .freq_tab[0] = {
+ .freq_clip_max = 800 * 1000,
+ },
+ .freq_tab[1] = {
+ .freq_clip_max = 200 * 1000,
+ },
+ .freq_tab_count = 2,
+ .type = SOC_ARCH_EXYNOS5,
+};
+#define EXYNOS5_TMU_DRV_DATA ((kernel_ulong_t)&exynos5_default_tmu_data)
+#else
+#define EXYNOS5_TMU_DRV_DATA ((kernel_ulong_t)NULL)
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id exynos_tmu_match[] = {
+ {
+ .compatible = "samsung,exynos4-tmu",
+ .data = (void *)EXYNOS4_TMU_DRV_DATA,
+ },
+ {
+ .compatible = "samsung,exynos5-tmu",
+ .data = (void *)EXYNOS5_TMU_DRV_DATA,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, exynos_tmu_match);
+#else
+#define exynos_tmu_match NULL
+#endif
+
+static struct platform_device_id exynos_tmu_driver_ids[] = {
+ {
+ .name = "exynos4-tmu",
+ .driver_data = EXYNOS4_TMU_DRV_DATA,
+ },
+ {
+ .name = "exynos5-tmu",
+ .driver_data = EXYNOS5_TMU_DRV_DATA,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, exynos4_tmu_driver_ids);
+
+static inline struct exynos_tmu_platform_data *exynos_get_driver_data(
+ struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(exynos_tmu_match, pdev->dev.of_node);
+ if (!match)
+ return NULL;
+ return (struct exynos_tmu_platform_data *) match->data;
+ }
+#endif
+ return (struct exynos_tmu_platform_data *)
+ platform_get_device_id(pdev)->driver_data;
}
-;
static int __devinit exynos_tmu_probe(struct platform_device *pdev)
{
struct exynos_tmu_data *data;
struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data;
int ret, i;
+ if (!pdata)
+ pdata = exynos_get_driver_data(pdev);
+
if (!pdata) {
dev_err(&pdev->dev, "No platform init data supplied.\n");
return -ENODEV;
@@ -813,11 +916,13 @@ static struct platform_driver exynos_tmu_driver = {
.driver = {
.name = "exynos-tmu",
.owner = THIS_MODULE,
+ .of_match_table = exynos_tmu_match,
},
.probe = exynos_tmu_probe,
.remove = __devexit_p(exynos_tmu_remove),
.suspend = exynos_tmu_suspend,
.resume = exynos_tmu_resume,
+ .id_table = exynos_tmu_driver_ids,
};
module_platform_driver(exynos_tmu_driver);
--
1.7.1
next prev parent reply other threads:[~2012-05-08 16:18 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-08 16:18 [PATCH v3 0/6] thermal: exynos: Add kernel thermal support for exynos platform Amit Daniel Kachhap
2012-05-08 16:18 ` [PATCH v3 1/6] thermal: Add a new trip type to use cooling device instance number Amit Daniel Kachhap
[not found] ` <1336493898-7039-2-git-send-email-amit.kachhap-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2012-05-08 16:18 ` [PATCH v3 2/6] thermal: Add generic cpufreq cooling implementation Amit Daniel Kachhap
[not found] ` <1336493898-7039-3-git-send-email-amit.kachhap-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2012-05-08 16:18 ` [PATCH v3 3/6] hwmon: exynos4: Move thermal sensor driver to driver/thermal directory Amit Daniel Kachhap
[not found] ` <1336493898-7039-4-git-send-email-amit.kachhap-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2012-05-08 16:18 ` [PATCH v3 4/6] thermal: exynos5: Add exynos5 thermal sensor driver support Amit Daniel Kachhap
[not found] ` <1336493898-7039-5-git-send-email-amit.kachhap-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2012-05-08 16:18 ` [PATCH v3 5/6] thermal: exynos: Register the tmu sensor with the kernel thermal layer Amit Daniel Kachhap
[not found] ` <1336493898-7039-6-git-send-email-amit.kachhap-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2012-05-08 16:18 ` Amit Daniel Kachhap [this message]
2012-05-08 20:16 ` [PATCH v3 6/6] ARM: exynos: Add thermal sensor driver platform data support Andrew Morton
2012-05-08 20:16 ` [PATCH v3 5/6] thermal: exynos: Register the tmu sensor with the kernel thermal layer Andrew Morton
2012-05-09 9:26 ` Amit Kachhap
2012-05-08 20:16 ` [PATCH v3 3/6] hwmon: exynos4: Move thermal sensor driver to driver/thermal directory Andrew Morton
2012-05-08 20:16 ` [PATCH v3 2/6] thermal: Add generic cpufreq cooling implementation Andrew Morton
2012-05-09 8:27 ` Amit Kachhap
2012-05-08 20:06 ` [PATCH v3 0/6] thermal: exynos: Add kernel thermal support for exynos platform Zhang, Rui
2012-05-09 12:44 ` Amit Kachhap
2012-05-08 20:16 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336493898-7039-7-git-send-email-amit.kachhap@linaro.org \
--to=amit.kachhap-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=durgadoss.r-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=lenb-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linaro-dev-cunTk1MwBs8s++Sfvej+rw@public.gmane.org \
--cc=linux-acpi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-pm-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=patches-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).