From: Eduardo Valentin <eduardo.valentin@ti.com>
To: b-cousson@ti.com, kishon@ti.com, kbaidarov@dev.rtsoft.ru,
santosh.shilimkar@ti.com, tony@atomide.com, paul@pwsan.com
Cc: amit.kucheria@linaro.org, balbi@ti.com,
linux-pm@lists.linux-foundation.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 02/11] ARM: OMAP: expose control.h to mach area
Date: Fri, 25 May 2012 11:25:52 +0300 [thread overview]
Message-ID: <1337934361-1606-3-git-send-email-eduardo.valentin@ti.com> (raw)
In-Reply-To: <1337934361-1606-1-git-send-email-eduardo.valentin@ti.com>
This patch exposes the definitions under control.h to
drivers outside the machine code.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
arch/arm/mach-omap2/am35xx-emac.c | 2 +-
arch/arm/mach-omap2/board-3430sdp.c | 2 +-
arch/arm/mach-omap2/board-4430sdp.c | 2 +-
arch/arm/mach-omap2/board-am3517crane.c | 2 +-
arch/arm/mach-omap2/board-am3517evm.c | 2 +-
arch/arm/mach-omap2/board-apollon.c | 2 +-
arch/arm/mach-omap2/board-cm-t3517.c | 2 +-
arch/arm/mach-omap2/board-h4.c | 2 +-
arch/arm/mach-omap2/board-igep0020.c | 2 +-
arch/arm/mach-omap2/board-ldp.c | 2 +-
arch/arm/mach-omap2/board-omap3logic.c | 2 +-
arch/arm/mach-omap2/board-omap4panda.c | 2 +-
arch/arm/mach-omap2/board-omap4pcm049.c | 2 +-
arch/arm/mach-omap2/clock2420_data.c | 2 +-
arch/arm/mach-omap2/clock2430_data.c | 2 +-
arch/arm/mach-omap2/clock3xxx_data.c | 2 +-
arch/arm/mach-omap2/clock44xx_data.c | 2 +-
arch/arm/mach-omap2/common.c | 2 +-
arch/arm/mach-omap2/control.c | 2 +-
arch/arm/mach-omap2/cpuidle34xx.c | 2 +-
arch/arm/mach-omap2/devices.c | 2 +-
arch/arm/mach-omap2/display.c | 2 +-
arch/arm/mach-omap2/hsmmc.c | 2 +-
arch/arm/mach-omap2/id.c | 2 +-
arch/arm/mach-omap2/{ => include/mach}/control.h | 2 +-
arch/arm/mach-omap2/mcbsp.c | 2 +-
arch/arm/mach-omap2/mux.c | 2 +-
arch/arm/mach-omap2/omap_phy_internal.c | 2 +-
arch/arm/mach-omap2/opp3xxx_data.c | 2 +-
arch/arm/mach-omap2/opp4xxx_data.c | 2 +-
arch/arm/mach-omap2/pm24xx.c | 2 +-
arch/arm/mach-omap2/pm34xx.c | 2 +-
arch/arm/mach-omap2/prcm.c | 2 +-
arch/arm/mach-omap2/serial.c | 2 +-
arch/arm/mach-omap2/sleep34xx.S | 2 +-
arch/arm/mach-omap2/sr_device.c | 2 +-
arch/arm/mach-omap2/usb-fs.c | 2 +-
arch/arm/mach-omap2/voltage.c | 2 +-
38 files changed, 38 insertions(+), 38 deletions(-)
rename arch/arm/mach-omap2/{ => include/mach}/control.h (99%)
diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c
index 447682c..c3da28a 100644
--- a/arch/arm/mach-omap2/am35xx-emac.c
+++ b/arch/arm/mach-omap2/am35xx-emac.c
@@ -21,7 +21,7 @@
#include <plat/irqs.h>
#include <mach/am35xx.h>
-#include "control.h"
+#include <mach/control.h>
static struct mdio_platform_data am35xx_emac_mdio_pdata;
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 37abb0d..ad1132b 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -46,7 +46,7 @@
#include "sdram-qimonda-hyb18m512160af-6.h"
#include "hsmmc.h"
#include "pm.h"
-#include "control.h"
+#include <mach/control.h>
#include "common-board-devices.h"
#define CONFIG_DISABLE_HFCLK 1
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 94af6cd..8f7f76b 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -47,7 +47,7 @@
#include "mux.h"
#include "hsmmc.h"
-#include "control.h"
+#include <mach/control.h>
#include "common-board-devices.h"
#define ETH_KS8851_IRQ 34
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 3b8a53c..2ad514d 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -32,7 +32,7 @@
#include "am35xx-emac.h"
#include "mux.h"
-#include "control.h"
+#include <mach/control.h>
#define GPIO_USB_POWER 35
#define GPIO_USB_NRESET 38
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 99790eb..bef6586 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -41,7 +41,7 @@
#include "am35xx-emac.h"
#include "mux.h"
-#include "control.h"
+#include <mach/control.h>
#include "hsmmc.h"
#define LCD_PANEL_PWR 176
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 768ece2..bd04fe2 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -44,7 +44,7 @@
#include <video/omap-panel-generic-dpi.h>
#include "mux.h"
-#include "control.h"
+#include <mach/control.h>
/* LED & Switch macros */
#define LED0_GPIO13 13
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 9e66e16..1d2b7a3 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -47,7 +47,7 @@
#include <mach/am35xx.h>
#include "mux.h"
-#include "control.h"
+#include <mach/control.h>
#include "common-board-devices.h"
#include "am35xx-emac.h"
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 0bbbabe..623a231 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -43,7 +43,7 @@
#include <video/omap-panel-generic-dpi.h>
#include "mux.h"
-#include "control.h"
+#include <mach/control.h>
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 7a27409..ebef044 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -42,7 +42,7 @@
#include "sdram-numonyx-m65kxxxxam.h"
#include "common-board-devices.h"
#include "board-flash.h"
-#include "control.h"
+#include <mach/control.h>
#define IGEP2_SMSC911X_CS 5
#define IGEP2_SMSC911X_GPIO 176
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 1b60495..6383a76 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -50,7 +50,7 @@
#include "board-flash.h"
#include "mux.h"
#include "hsmmc.h"
-#include "control.h"
+#include <mach/control.h>
#include "common-board-devices.h"
#define LDP_SMSC911X_CS 1
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index c008bf8..ca3e075 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -37,7 +37,7 @@
#include "mux.h"
#include "hsmmc.h"
-#include "control.h"
+#include <mach/control.h>
#include "common-board-devices.h"
#include <plat/mux.h>
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 847a857..b1c8517 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -45,7 +45,7 @@
#include <video/omap-panel-tfp410.h>
#include "hsmmc.h"
-#include "control.h"
+#include <mach/control.h>
#include "mux.h"
#include "common-board-devices.h"
diff --git a/arch/arm/mach-omap2/board-omap4pcm049.c b/arch/arm/mach-omap2/board-omap4pcm049.c
index a95f426..101e984 100644
--- a/arch/arm/mach-omap2/board-omap4pcm049.c
+++ b/arch/arm/mach-omap2/board-omap4pcm049.c
@@ -48,7 +48,7 @@
#include "common.h"
#include "hsmmc.h"
-#include "control.h"
+#include <mach/control.h>
#include "mux.h"
#include "common-board-devices.h"
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index bace930..f350e96 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -30,7 +30,7 @@
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
-#include "control.h"
+#include <mach/control.h>
#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 3b4d09a..dd08bcb 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -29,7 +29,7 @@
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
-#include "control.h"
+#include <mach/control.h>
#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 4e1a3b0..694625f 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -34,7 +34,7 @@
#include "cm-regbits-34xx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
-#include "control.h"
+#include <mach/control.h>
/*
* clocks
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 2172f66..ce11ee4 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -39,7 +39,7 @@
#include "cm-regbits-44xx.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
-#include "control.h"
+#include <mach/control.h>
#include "scrm44xx.h"
/* OMAP4 modulemode control */
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 8a6953a..3dc94d0 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -25,7 +25,7 @@
#include "iomap.h"
#include "common.h"
#include "sdrc.h"
-#include "control.h"
+#include <mach/control.h>
/* Global address base setup code */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 08e674b..92e35bf 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -26,7 +26,7 @@
#include "cm2xxx_3xxx.h"
#include "sdrc.h"
#include "pm.h"
-#include "control.h"
+#include <mach/control.h>
/* Used by omap3_ctrl_save_padconf() */
#define START_PADCONF_SAVE 0x2
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 207bc1c..7d82c6bb 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -33,7 +33,7 @@
#include "clockdomain.h"
#include "pm.h"
-#include "control.h"
+#include <mach/control.h>
#include "common.h"
#ifdef CONFIG_CPU_IDLE
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 7b4b932..152c266 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -34,7 +34,7 @@
#include <plat/omap4-keypad.h>
#include "mux.h"
-#include "control.h"
+#include <mach/control.h>
#include "devices.h"
#define L3_MODULES_MAX_LEN 12
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index db5a88a..0681407 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -32,7 +32,7 @@
#include "iomap.h"
#include "mux.h"
-#include "control.h"
+#include <mach/control.h>
#include "display.h"
#define DISPC_CONTROL 0x0040
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index be697d4..33b3d62 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -22,7 +22,7 @@
#include "mux.h"
#include "hsmmc.h"
-#include "control.h"
+#include <mach/control.h>
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 0389b32..5bb9746 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -26,7 +26,7 @@
#include <mach/id.h>
-#include "control.h"
+#include <mach/control.h>
static unsigned int omap_revision;
static const char *cpu_rev;
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/include/mach/control.h
similarity index 99%
rename from arch/arm/mach-omap2/control.h
rename to arch/arm/mach-omap2/include/mach/control.h
index dad2903..cf42764 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/include/mach/control.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-omap2/control.h
+ * arch/arm/mach-omap2/include/mach/control.h
*
* OMAP2/3/4 System Control Module definitions
*
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 577cb77..0367035 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -25,7 +25,7 @@
#include <plat/omap_device.h>
#include <linux/pm_runtime.h>
-#include "control.h"
+#include <mach/control.h>
/*
* FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 3268ee2..f23e6618 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -38,7 +38,7 @@
#include <plat/omap_hwmod.h>
-#include "control.h"
+#include <mach/control.h>
#include "mux.h"
#include "prm.h"
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index 4c90477..b2c9253 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -29,7 +29,7 @@
#include <linux/usb.h>
#include <plat/usb.h>
-#include "control.h"
+#include <mach/control.h>
/* OMAP control module register for UTMI PHY */
#define CONTROL_DEV_CONF 0x300
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
index d95f3f9..6dafdbb 100644
--- a/arch/arm/mach-omap2/opp3xxx_data.c
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -21,7 +21,7 @@
#include <plat/cpu.h>
-#include "control.h"
+#include <mach/control.h>
#include "omap_opp_data.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
index 2293ba2..27f823c 100644
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -22,7 +22,7 @@
#include <plat/cpu.h>
-#include "control.h"
+#include <mach/control.h>
#include "omap_opp_data.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index facfffc..7ebca30 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -49,7 +49,7 @@
#include "cm-regbits-24xx.h"
#include "sdrc.h"
#include "pm.h"
-#include "control.h"
+#include <mach/control.h>
#include "powerdomain.h"
#include "clockdomain.h"
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 8b43aef..1d2a51c 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -49,7 +49,7 @@
#include "prm2xxx_3xxx.h"
#include "pm.h"
#include "sdrc.h"
-#include "control.h"
+#include <mach/control.h>
/* pm34xx errata defined in pm.h */
u16 pm34xx_errata;
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 480f40a..fff0b09 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -37,7 +37,7 @@
#include "prminst44xx.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-44xx.h"
-#include "control.h"
+#include <mach/control.h>
void __iomem *prm_base;
void __iomem *cm_base;
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 678dd1d..97b09da5 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -39,7 +39,7 @@
#include "pm.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
-#include "control.h"
+#include <mach/control.h>
#include "mux.h"
/*
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 1f62f23..b3f6bfc 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -33,7 +33,7 @@
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "sdrc.h"
-#include "control.h"
+#include <mach/control.h>
/*
* Registers access definitions
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index a503e1e..48a01f6 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -26,7 +26,7 @@
#include "smartreflex.h"
#include "voltage.h"
-#include "control.h"
+#include <mach/control.h>
#include "pm.h"
static bool sr_enable_on_init;
diff --git a/arch/arm/mach-omap2/usb-fs.c b/arch/arm/mach-omap2/usb-fs.c
index 1481078..94d471c 100644
--- a/arch/arm/mach-omap2/usb-fs.c
+++ b/arch/arm/mach-omap2/usb-fs.c
@@ -32,7 +32,7 @@
#include <plat/usb.h>
#include <plat/board.h>
-#include "control.h"
+#include <mach/control.h>
#include "mux.h"
#define INT_USB_IRQ_GEN INT_24XX_USB_IRQ_GEN
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 4dc60e8..d2f0644 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -34,7 +34,7 @@
#include "prm44xx.h"
#include "prcm44xx.h"
#include "prminst44xx.h"
-#include "control.h"
+#include <mach/control.h>
#include "voltage.h"
#include "powerdomain.h"
--
1.7.7.1.488.ge8e1c
next prev parent reply other threads:[~2012-05-25 8:25 UTC|newest]
Thread overview: 99+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-25 8:25 [RFC PATCH 00/11] OMAP System Control Module Eduardo Valentin
2012-05-25 8:25 ` [RFC PATCH 01/11] ARM: OMAP4: Remove un-used control module headers and defines Eduardo Valentin
2012-05-28 9:12 ` Shilimkar, Santosh
2012-05-25 8:25 ` Eduardo Valentin [this message]
2012-05-28 9:25 ` [RFC PATCH 02/11] ARM: OMAP: expose control.h to mach area Shilimkar, Santosh
2012-05-28 10:30 ` Valentin, Eduardo
2012-06-01 11:19 ` Tony Lindgren
2012-05-25 8:25 ` [RFC PATCH 03/11] arm: omap: device: create a device for system control module Eduardo Valentin
2012-05-25 12:30 ` Cousson, Benoit
2012-05-29 9:44 ` Eduardo Valentin
2012-06-14 13:50 ` Konstantin Baydarov
2012-06-15 9:22 ` Valentin, Eduardo
2012-05-29 13:39 ` Konstantin Baydarov
2012-05-25 8:25 ` [RFC PATCH 04/11] OMAP: Add early " Eduardo Valentin
2012-05-25 11:32 ` Konstantin Baydarov
2012-05-25 11:44 ` Valentin, Eduardo
2012-05-25 11:54 ` Konstantin Baydarov
2012-05-25 12:32 ` Cousson, Benoit
2012-05-28 9:58 ` Shilimkar, Santosh
2012-05-25 8:25 ` [RFC PATCH 05/11] mfd: omap: control: core system control driver Eduardo Valentin
2012-05-25 12:52 ` Cousson, Benoit
2012-05-28 11:35 ` Eduardo Valentin
2012-05-29 13:25 ` Cousson, Benoit
2012-06-01 11:29 ` Tony Lindgren
2012-06-01 12:30 ` Shilimkar, Santosh
2012-06-01 12:43 ` Cousson, Benoit
2012-06-01 17:19 ` Eduardo Valentin
2012-06-01 13:40 ` Konstantin Baydarov
2012-06-01 14:13 ` Tony Lindgren
2012-06-01 14:26 ` Konstantin Baydarov
2012-05-28 9:54 ` Shilimkar, Santosh
2012-05-28 11:42 ` Eduardo Valentin
2012-05-28 13:15 ` Shilimkar, Santosh
2012-05-29 13:31 ` Cousson, Benoit
2012-05-25 8:25 ` [RFC PATCH 06/11] OMAP2+: use control module mfd driver in omap_type Eduardo Valentin
2012-05-25 12:53 ` Cousson, Benoit
2012-05-28 10:02 ` Shilimkar, Santosh
2012-05-28 11:24 ` Eduardo Valentin
2012-06-01 11:35 ` Tony Lindgren
2012-05-25 8:25 ` [RFC PATCH 07/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver Eduardo Valentin
2012-05-25 13:35 ` Shubhrajyoti Datta
2012-05-25 15:06 ` Cousson, Benoit
2012-06-01 11:38 ` Tony Lindgren
2012-06-01 13:20 ` [linux-pm] " Tony Lindgren
2012-06-01 14:07 ` Kevin Hilman
2012-06-01 14:15 ` Tony Lindgren
2012-05-25 8:25 ` [RFC PATCH 08/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields Eduardo Valentin
2012-05-25 15:13 ` Cousson, Benoit
2012-05-28 11:17 ` Eduardo Valentin
2012-05-28 10:04 ` Shilimkar, Santosh
2012-05-28 11:18 ` Eduardo Valentin
2012-05-25 8:25 ` [RFC PATCH 09/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor Eduardo Valentin
2012-05-25 15:49 ` Cousson, Benoit
2012-05-28 11:06 ` Eduardo Valentin
2012-05-28 11:16 ` Eduardo Valentin
2012-05-29 13:14 ` Cousson, Benoit
2012-05-29 17:51 ` Mike Turquette
2012-05-25 16:39 ` Konstantin Baydarov
2012-05-28 10:55 ` Eduardo Valentin
2012-06-01 11:42 ` Tony Lindgren
2012-05-25 8:26 ` [RFC PATCH 10/11] omap4: thermal: add basic CPU thermal zone Eduardo Valentin
2012-05-28 9:33 ` Shilimkar, Santosh
2012-05-28 9:48 ` Felipe Balbi
2012-05-28 10:26 ` Valentin, Eduardo
2012-05-29 12:54 ` Cousson, Benoit
2012-05-25 8:26 ` [RFC PATCH 11/11] ARM: DT: Add support to system control module for OMAP4 Eduardo Valentin
2012-05-29 9:49 ` Konstantin Baydarov
2012-05-30 8:38 ` Cousson, Benoit
2012-05-30 9:05 ` Konstantin Baydarov
2012-05-30 9:26 ` Cousson, Benoit
2012-05-30 10:17 ` Konstantin Baydarov
2012-05-30 10:22 ` Cousson, Benoit
2012-05-30 10:42 ` Eduardo Valentin
2012-05-30 12:16 ` Cousson, Benoit
2012-05-31 12:06 ` Konstantin Baydarov
2012-05-31 12:49 ` Eduardo Valentin
2012-05-31 12:52 ` Cousson, Benoit
2012-05-31 14:51 ` Konstantin Baydarov
2012-05-25 8:35 ` [RFC PATCH 00/11] OMAP System Control Module Eduardo Valentin
2012-05-25 10:50 ` Konstantin Baydarov
2012-05-25 11:11 ` Valentin, Eduardo
2012-05-25 12:21 ` Konstantin Baydarov
2012-06-01 0:12 ` [linux-pm] " Kevin Hilman
2012-06-18 11:32 ` [RFC PATCH v2 01/11] ARM: OMAP4: Remove un-used control module headers and defines Konstantin Baydarov
2012-06-18 11:32 ` [RFC PATCH v2 02/11] ARM: OMAP: expose control.h to mach area Konstantin Baydarov
2012-06-20 10:17 ` Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 03/11] mfd: omap: control: core system control driver Konstantin Baydarov
2012-06-20 10:22 ` Tony Lindgren
2012-06-20 14:13 ` Konstantin Baydarov
2012-06-26 11:17 ` Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 04/11] OMAP2+: use control module mfd driver in omap_type Konstantin Baydarov
2012-06-20 10:24 ` Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 05/11] mfd: omap: control: usb-phy: introduce the ctrl-module usb driver Konstantin Baydarov
2012-06-18 11:32 ` [RFC PATCH v2 06/11] ARM: OMAP4+: Adding the temperature sensor register set bit fields Konstantin Baydarov
2012-06-20 10:25 ` Tony Lindgren
2012-06-18 11:32 ` [RFC PATCH v2 07/11] ARM: OMAP4+: thermal: introduce bandgap temperature sensor Konstantin Baydarov
2012-06-18 11:32 ` [RFC PATCH v2 08/11] omap4: thermal: add basic CPU thermal zone Konstantin Baydarov
2012-06-18 11:32 ` [RFC PATCH v2 09/11] ARM: DT: Add support to system control module for OMAP4 Konstantin Baydarov
2012-06-18 12:13 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337934361-1606-3-git-send-email-eduardo.valentin@ti.com \
--to=eduardo.valentin@ti.com \
--cc=amit.kucheria@linaro.org \
--cc=b-cousson@ti.com \
--cc=balbi@ti.com \
--cc=kbaidarov@dev.rtsoft.ru \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=paul@pwsan.com \
--cc=santosh.shilimkar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).