[RFC PATCH 04/11] OMAP: Add early device for system control module

[Eduardo Valentin <eduardo.valentin@ti.com>]

This is a way to add an early device for system control module.
the code is also requesting for driver registration and probing.
Done at early_initcall because at that time, ioremapping is possible.

Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
 arch/arm/mach-omap2/devices.c |   29 +++++++++++++++++++++++++++++
 1 files changed, 29 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 9332673..58cc5c3 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -40,6 +40,35 @@
 #define L3_MODULES_MAX_LEN 12
 #define L3_MODULES 3
 
+static struct resource control_resources[] = {
+	[0] = {
+		.start	= 0x4a002000,
+		.end	= 0x4a0027ff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+static struct platform_device control_device = {
+	.name		= "omap-control-core",
+	.id		= 0,
+	.resource	= control_resources,
+	.num_resources	= ARRAY_SIZE(control_resources),
+};
+
+static struct platform_device *early_devices[] __initdata = {
+	&control_device,
+};
+
+static int __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(early_devices,
+				   ARRAY_SIZE(early_devices));
+	early_platform_driver_register_all("early_omap_control");
+	early_platform_driver_probe("early_omap_control", 1, false);
+
+	return 0;
+}
+early_initcall(plat_early_device_setup);
+
 static int omap_init_control(void)
 {
 	struct omap_hwmod		*oh;
-- 
1.7.7.1.488.ge8e1c