Linux Power Management development
 help / color / mirror / Atom feed
From: Nishanth Menon <nm@ti.com>
To: linux-pm <linux-pm@vger.kernel.org>
Cc: Nishanth Menon <nm@ti.com>,
	Rajagopal Venkat <rajagopal.venkat@linaro.org>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	"Rafael J. Wysocki" <rjw@sisk.pl>, Kevin Hilman <khilman@ti.com>,
	linux-kernel@vger.kernel.org
Subject: [linux-next PATCH 5/7] PM / devfreq: governors: add GPL module license and allow module build
Date: Mon, 29 Oct 2012 15:01:46 -0500	[thread overview]
Message-ID: <1351540908-12195-6-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1351540908-12195-1-git-send-email-nm@ti.com>

Add GPL module license and remove the static build
restrictions for building governors. This allows governors now
to be loaded on a need basis and reloaded independently of kernel
build

Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Kevin Hilman <khilman@ti.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Signed-off-by: Nishanth Menon <nm@ti.com>
---
 drivers/devfreq/Kconfig                   |    8 ++++----
 drivers/devfreq/governor_performance.c    |    2 ++
 drivers/devfreq/governor_powersave.c      |    2 ++
 drivers/devfreq/governor_simpleondemand.c |    2 ++
 drivers/devfreq/governor_userspace.c      |    2 ++
 5 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index f6b0a6e2..0f079be 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -30,7 +30,7 @@ if PM_DEVFREQ
 comment "DEVFREQ Governors"
 
 config DEVFREQ_GOV_SIMPLE_ONDEMAND
-	bool "Simple Ondemand"
+	tristate "Simple Ondemand"
 	help
 	  Chooses frequency based on the recent load on the device. Works
 	  similar as ONDEMAND governor of CPUFREQ does. A device with
@@ -39,7 +39,7 @@ config DEVFREQ_GOV_SIMPLE_ONDEMAND
 	  values to the governor with data field at devfreq_add_device().
 
 config DEVFREQ_GOV_PERFORMANCE
-	bool "Performance"
+	tristate "Performance"
 	help
 	  Sets the frequency at the maximum available frequency.
 	  This governor always returns UINT_MAX as frequency so that
@@ -47,7 +47,7 @@ config DEVFREQ_GOV_PERFORMANCE
 	  at any time.
 
 config DEVFREQ_GOV_POWERSAVE
-	bool "Powersave"
+	tristate "Powersave"
 	help
 	  Sets the frequency at the minimum available frequency.
 	  This governor always returns 0 as frequency so that
@@ -55,7 +55,7 @@ config DEVFREQ_GOV_POWERSAVE
 	  at any time.
 
 config DEVFREQ_GOV_USERSPACE
-	bool "Userspace"
+	tristate "Userspace"
 	help
 	  Sets the frequency at the user specified one.
 	  This governor returns the user configured frequency if there
diff --git a/drivers/devfreq/governor_performance.c b/drivers/devfreq/governor_performance.c
index 865a369..c72f942 100644
--- a/drivers/devfreq/governor_performance.c
+++ b/drivers/devfreq/governor_performance.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/devfreq.h>
+#include <linux/module.h>
 #include "governor.h"
 
 static int devfreq_performance_func(struct devfreq *df,
@@ -63,3 +64,4 @@ static void __exit devfreq_performance_exit(void)
 	return;
 }
 module_exit(devfreq_performance_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/devfreq/governor_powersave.c b/drivers/devfreq/governor_powersave.c
index 8612c0f..0c6bed5 100644
--- a/drivers/devfreq/governor_powersave.c
+++ b/drivers/devfreq/governor_powersave.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/devfreq.h>
+#include <linux/module.h>
 #include "governor.h"
 
 static int devfreq_powersave_func(struct devfreq *df,
@@ -60,3 +61,4 @@ static void __exit devfreq_powersave_exit(void)
 	return;
 }
 module_exit(devfreq_powersave_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/devfreq/governor_simpleondemand.c b/drivers/devfreq/governor_simpleondemand.c
index a870a24..0720ba8 100644
--- a/drivers/devfreq/governor_simpleondemand.c
+++ b/drivers/devfreq/governor_simpleondemand.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/devfreq.h>
 #include <linux/math64.h>
 #include "governor.h"
@@ -143,3 +144,4 @@ static void __exit devfreq_simple_ondemand_exit(void)
 	return;
 }
 module_exit(devfreq_simple_ondemand_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/devfreq/governor_userspace.c b/drivers/devfreq/governor_userspace.c
index 34fb80f..35de6e8 100644
--- a/drivers/devfreq/governor_userspace.c
+++ b/drivers/devfreq/governor_userspace.c
@@ -14,6 +14,7 @@
 #include <linux/devfreq.h>
 #include <linux/pm.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include "governor.h"
 
 struct userspace_data {
@@ -158,3 +159,4 @@ static void __exit devfreq_userspace_exit(void)
 	return;
 }
 module_exit(devfreq_userspace_exit);
+MODULE_LICENSE("GPL");
-- 
1.7.9.5

  parent reply	other threads:[~2012-10-29 20:01 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-29 20:01 [linux-next PATCH 0/7] PM / devfreq: allow governors to be modules and switch dynamically Nishanth Menon
2012-10-29 20:01 ` [linux-next PATCH 1/7] PM / devfreq: export update_devfreq Nishanth Menon
2012-10-29 20:01 ` [linux-next PATCH 2/7] PM / devfreq: provide hooks for governors to be registered Nishanth Menon
2012-10-29 20:01 ` [linux-next PATCH 3/7] PM / devfreq: register governors with devfreq framework Nishanth Menon
2012-10-29 20:01 ` [linux-next PATCH 4/7] PM / devfreq: map devfreq drivers to governor using name Nishanth Menon
2012-10-29 20:01 ` Nishanth Menon [this message]
2012-10-29 20:01 ` [linux-next PATCH 6/7] PM / devfreq: allow sysfs governor node to switch governor Nishanth Menon
2012-10-29 20:01 ` [linux-next PATCH 7/7] PM / devfreq: Add sysfs node to expose available governors Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1351540908-12195-6-git-send-email-nm@ti.com \
    --to=nm@ti.com \
    --cc=khilman@ti.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=rajagopal.venkat@linaro.org \
    --cc=rjw@sisk.pl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox