From: Zhang Rui <rui.zhang@intel.com>
To: Linux PM list <linux-pm@vger.kernel.org>
Cc: Sachin Kamat <sachin.kamat@linaro.org>,
Amit Kachhap <amit.kachhap@linaro.org>,
"Zhang, Rui" <rui.zhang@intel.com>,
patches@linaro.org
Subject: [PATCH 1/2] Thermal: drivers/thermal/Kconfig refactor
Date: Thu, 15 Nov 2012 15:01:57 +0800 [thread overview]
Message-ID: <1352962917.2080.9.camel@rzhang1-mobl4> (raw)
drivers/thermal/Kconfig refactor.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
---
drivers/thermal/Kconfig | 103 +++++++++++++++++++++++------------------------
1 file changed, 51 insertions(+), 52 deletions(-)
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 266c15e..937a23d 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -13,15 +13,62 @@ menuconfig THERMAL
All platforms with ACPI thermal support can use this driver.
If you want this support, you should say Y or M here.
+if THERMAL
+
config THERMAL_HWMON
bool
- depends on THERMAL
depends on HWMON=y || HWMON=THERMAL
default y
+choice
+ prompt "Default Thermal governor"
+ default THERMAL_DEFAULT_GOV_STEP_WISE
+ help
+ This option sets which thermal governor shall be loaded at
+ startup. If in doubt, select 'step_wise'.
+
+config THERMAL_DEFAULT_GOV_STEP_WISE
+ bool "step_wise"
+ select STEP_WISE
+ help
+ Use the step_wise governor as default. This throttles the
+ devices one step at a time.
+
+config THERMAL_DEFAULT_GOV_FAIR_SHARE
+ bool "fair_share"
+ select FAIR_SHARE
+ help
+ Use the fair_share governor as default. This throttles the
+ devices based on their 'contribution' to a zone. The
+ contribution should be provided through platform data.
+
+config THERMAL_DEFAULT_GOV_USER_SPACE
+ bool "user_space"
+ select USER_SPACE
+ help
+ Select this if you want to let the user space manage the
+ lpatform thermals.
+
+endchoice
+
+config FAIR_SHARE
+ bool "Fair-share thermal governor"
+ help
+ Enable this to manage platform thermals using fair-share governor.
+
+config STEP_WISE
+ bool "Step_wise thermal governor"
+ help
+ Enable this to manage platform thermals using a simple linear
+
+config USER_SPACE
+ bool "User_space thermal governor"
+ help
+ Enable this to let the user space manage the platform thermals.
+
config CPU_THERMAL
bool "generic cpu cooling support"
- depends on THERMAL && CPU_FREQ
+ depends on CPU_FREQ
select CPU_FREQ_TABLE
help
This implements the generic cpu cooling mechanism through frequency
@@ -33,7 +80,6 @@ config CPU_THERMAL
config SPEAR_THERMAL
bool "SPEAr thermal sensor driver"
- depends on THERMAL
depends on PLAT_SPEAR
depends on OF
help
@@ -42,7 +88,6 @@ config SPEAR_THERMAL
config RCAR_THERMAL
tristate "Renesas R-Car thermal driver"
- depends on THERMAL
depends on ARCH_SHMOBILE
help
Enable this to plug the R-Car thermal sensor driver into the Linux
@@ -50,57 +95,11 @@ config RCAR_THERMAL
config EXYNOS_THERMAL
tristate "Temperature sensor on Samsung EXYNOS"
- depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && THERMAL
+ depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
select CPU_FREQ_TABLE
help
If you say yes here you get support for TMU (Thermal Managment
Unit) on SAMSUNG EXYNOS series of SoC.
-config FAIR_SHARE
- bool "Fair-share thermal governor"
- depends on THERMAL
- help
- Enable this to manage platform thermals using fair-share governor.
-
-config STEP_WISE
- bool "Step_wise thermal governor"
- depends on THERMAL
- help
- Enable this to manage platform thermals using a simple linear
-
-config USER_SPACE
- bool "User_space thermal governor"
- depends on THERMAL
- help
- Enable this to let the user space manage the platform thermals.
-
-choice
- prompt "Default Thermal governor"
- depends on THERMAL
- default THERMAL_DEFAULT_GOV_STEP_WISE
- help
- This option sets which thermal governor shall be loaded at
- startup. If in doubt, select 'step_wise'.
-
-config THERMAL_DEFAULT_GOV_STEP_WISE
- bool "step_wise"
- select STEP_WISE
- help
- Use the step_wise governor as default. This throttles the
- devices one step at a time.
-
-config THERMAL_DEFAULT_GOV_FAIR_SHARE
- bool "fair_share"
- select FAIR_SHARE
- help
- Use the fair_share governor as default. This throttles the
- devices based on their 'contribution' to a zone. The
- contribution should be provided through platform data.
-config THERMAL_DEFAULT_GOV_USER_SPACE
- bool "user_space"
- select USER_SPACE
- help
- Select this if you want to let the user space manage the
- platform thermals.
-endchoice
+endif
--
1.7.9.5
reply other threads:[~2012-11-15 7:02 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352962917.2080.9.camel@rzhang1-mobl4 \
--to=rui.zhang@intel.com \
--cc=amit.kachhap@linaro.org \
--cc=linux-pm@vger.kernel.org \
--cc=patches@linaro.org \
--cc=sachin.kamat@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).