* [PATCH V2 2/3] Introduce THERMAL_TREND_RAISE/DROP_FULL support for step_wise governor
@ 2012-11-22 7:52 Zhang Rui
0 siblings, 0 replies; only message in thread
From: Zhang Rui @ 2012-11-22 7:52 UTC (permalink / raw)
To: Linux PM list; +Cc: Amit Kachhap, durga, Zhang, Rui
>From ac2224a47b88ca64f4ae25da78fb032b31856624 Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Mon, 19 Nov 2012 16:10:20 +0800
Subject: [PATCH 2/3] Introduce THERMAL_TREND_RAISE/DROP_FULL support for
step_wise governor
step_wise governor should set the device cooling state to
upper/lower limit directly when THERMAL_TREND_RAISE/DROP_FULL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
---
drivers/thermal/step_wise.c | 64 +++++++++++++++++++++++++++++++------------
1 file changed, 46 insertions(+), 18 deletions(-)
diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c
index 1242cff..c3a0e87 100644
--- a/drivers/thermal/step_wise.c
+++ b/drivers/thermal/step_wise.c
@@ -35,21 +35,54 @@
* state for this trip point
* b. if the trend is THERMAL_TREND_DROPPING, use lower cooling
* state for this trip point
+ * c. if the trend is THERMAL_TREND_RAISE_FULL, use upper limit
+ * for this trip point
+ * d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit
+ * for this trip point
+ * If the temperature is lower than a trip point,
+ * a. if the trend is THERMAL_TREND_RAISING, do nothing
+ * b. if the trend is THERMAL_TREND_DROPPING, use lower cooling
+ * state for this trip point, if the cooling state already
+ * equals lower limit, deactivate the thermal instance
+ * c. if the trend is THERMAL_TREND_RAISE_FULL, do nothing
+ * d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit,
+ * if the cooling state already equals lower limit,
+ * deactive the thermal instance
*/
static unsigned long get_target_state(struct thermal_instance *instance,
- enum thermal_trend trend)
+ enum thermal_trend trend, bool throttle)
{
struct thermal_cooling_device *cdev = instance->cdev;
unsigned long cur_state;
cdev->ops->get_cur_state(cdev, &cur_state);
- if (trend == THERMAL_TREND_RAISING) {
- cur_state = cur_state < instance->upper ?
- (cur_state + 1) : instance->upper;
- } else if (trend == THERMAL_TREND_DROPPING) {
- cur_state = cur_state > instance->lower ?
- (cur_state - 1) : instance->lower;
+ switch (trend) {
+ case THERMAL_TREND_RAISING:
+ if (throttle)
+ cur_state = cur_state < instance->upper ?
+ (cur_state + 1) : instance->upper;
+ break;
+ case THERMAL_TREND_RAISE_FULL:
+ if (throttle)
+ cur_state = instance->upper;
+ break;
+ case THERMAL_TREND_DROPPING:
+ if (cur_state == instance->lower) {
+ if (!throttle)
+ cur_state = -1;
+ } else
+ cur_state -= 1;
+ break;
+ case THERMAL_TREND_DROP_FULL:
+ if (cur_state == instance->lower) {
+ if (!throttle)
+ cur_state = -1;
+ } else
+ cur_state = instance->lower;
+ break;
+ default:
+ break;
}
return cur_state;
@@ -76,7 +109,7 @@ static void update_instance_for_throttle(struct thermal_zone_device *tz,
if (instance->trip != trip)
continue;
- instance->target = get_target_state(instance, trend);
+ instance->target = get_target_state(instance, trend, true);
/* Activate a passive thermal instance */
if (instance->target == THERMAL_NO_TARGET)
@@ -87,28 +120,23 @@ static void update_instance_for_throttle(struct thermal_zone_device *tz,
}
static void update_instance_for_dethrottle(struct thermal_zone_device *tz,
- int trip, enum thermal_trip_type trip_type)
+ int trip, enum thermal_trip_type trip_type,
+ enum thermal_trend trend)
{
struct thermal_instance *instance;
- struct thermal_cooling_device *cdev;
- unsigned long cur_state;
list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
if (instance->trip != trip ||
instance->target == THERMAL_NO_TARGET)
continue;
- cdev = instance->cdev;
- cdev->ops->get_cur_state(cdev, &cur_state);
-
- instance->target = cur_state > instance->lower ?
- (cur_state - 1) : THERMAL_NO_TARGET;
+ instance->target = get_target_state(instance, trend, false);
/* Deactivate a passive thermal instance */
if (instance->target == THERMAL_NO_TARGET)
update_passive_instance(tz, trip_type, -1);
- cdev->updated = false; /* cdev needs update */
+ instance->cdev->updated = false; /* cdev needs update */
}
}
@@ -133,7 +161,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
if (tz->temperature >= trip_temp)
update_instance_for_throttle(tz, trip, trip_type, trend);
else
- update_instance_for_dethrottle(tz, trip, trip_type);
+ update_instance_for_dethrottle(tz, trip, trip_type, trend);
mutex_unlock(&tz->lock);
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2012-11-22 19:18 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-11-22 7:52 [PATCH V2 2/3] Introduce THERMAL_TREND_RAISE/DROP_FULL support for step_wise governor Zhang Rui
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).