From mboxrd@z Thu Jan 1 00:00:00 1970 From: Amit Daniel Kachhap Subject: [PATCH 2/5 RESEND] thermal: exynos: Miscellaneous fixes to support falling threshold interrupt Date: Sun, 6 Jan 2013 15:50:48 -0800 Message-ID: <1357516248-31350-1-git-send-email-amit.daniel@samsung.com> References: <1353937640-9939-3-git-send-email-amit.kachhap@linaro.org> Return-path: In-Reply-To: <1353937640-9939-3-git-send-email-amit.kachhap@linaro.org> Sender: linux-samsung-soc-owner@vger.kernel.org To: linux-pm@lists.linux-foundation.org, linux-pm@vger.kernel.org, Zhang Rui Cc: linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: linux-pm@vger.kernel.org Below fixes are done to support falling threshold interrupt, * Falling interrupt status macro corrected according to exynos5 data sheet. * The get trend function modified to calculate trip temperature correctly. * The clearing of interrupt status in the isr is now done after handling the event that caused the interrupt. Signed-off-by: Amit Daniel Kachhap --- drivers/thermal/exynos_thermal.c | 19 ++++++++++++------- 1 files changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c index dcd13f7..0d17d41 100644 --- a/drivers/thermal/exynos_thermal.c +++ b/drivers/thermal/exynos_thermal.c @@ -82,7 +82,7 @@ #define EXYNOS_TRIMINFO_RELOAD 0x1 #define EXYNOS_TMU_CLEAR_RISE_INT 0x111 -#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 16) +#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12) #define EXYNOS_MUX_ADDR_VALUE 6 #define EXYNOS_MUX_ADDR_SHIFT 20 #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 @@ -373,12 +373,19 @@ static int exynos_get_temp(struct thermal_zone_device *thermal, static int exynos_get_trend(struct thermal_zone_device *thermal, int trip, enum thermal_trend *trend) { - if (thermal->temperature >= trip) + int ret = 0; + unsigned long trip_temp; + + ret = exynos_get_trip_temp(thermal, trip, &trip_temp); + if (ret < 0) + return ret; + + if (thermal->temperature >= trip_temp) *trend = THERMAL_TREND_RAISING; else *trend = THERMAL_TREND_DROPPING; - return 0; + return ret; } /* Operation callback functions for thermal zone */ static struct thermal_zone_device_ops const exynos_dev_ops = { @@ -712,10 +719,9 @@ static void exynos_tmu_work(struct work_struct *work) struct exynos_tmu_data *data = container_of(work, struct exynos_tmu_data, irq_work); + exynos_report_trigger(); mutex_lock(&data->lock); clk_enable(data->clk); - - if (data->soc == SOC_ARCH_EXYNOS) writel(EXYNOS_TMU_CLEAR_RISE_INT | EXYNOS_TMU_CLEAR_FALL_INT, @@ -723,10 +729,9 @@ static void exynos_tmu_work(struct work_struct *work) else writel(EXYNOS4210_TMU_INTCLEAR_VAL, data->base + EXYNOS_TMU_REG_INTCLEAR); - clk_disable(data->clk); mutex_unlock(&data->lock); - exynos_report_trigger(); + enable_irq(data->irq); } -- 1.7.5.4