From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Lunn Subject: [PATCH v5 4/4] Dove: Thermal: Add DT node and enable in defconfig Date: Wed, 6 Feb 2013 07:35:27 +0100 Message-ID: <1360132527-22860-5-git-send-email-andrew@lunn.ch> References: <1360132527-22860-1-git-send-email-andrew@lunn.ch> Return-path: Received: from londo.lunn.ch ([80.238.139.98]:52993 "EHLO londo.lunn.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751719Ab3BFGgA (ORCPT ); Wed, 6 Feb 2013 01:36:00 -0500 In-Reply-To: <1360132527-22860-1-git-send-email-andrew@lunn.ch> Sender: linux-pm-owner@vger.kernel.org List-Id: linux-pm@vger.kernel.org To: Jason Cooper , rui.zhang@intel.com Cc: Sebastian Hesselbarth , linux ARM , linux-pm@vger.kernel.org, Andrew Lunn Add a device tree node to instantiate the dove thermal driver. Enable the driver and the thermal framework in dove_defconfig. Signed-off-by: Andrew Lunn --- arch/arm/boot/dts/dove.dtsi | 5 +++++ arch/arm/configs/dove_defconfig | 2 ++ 2 files changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 42eac1f..3584a00 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -50,6 +50,11 @@ #clock-cells = <1>; }; + thermal: thermal@d001c { + compatible = "marvell,dove-thermal"; + reg = <0xd001c 0x0c>, <0xd005c 0x08>; + }; + uart0: serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 0b7ee92..9713b5b 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -80,6 +80,8 @@ CONFIG_I2C_MV64XXX=y CONFIG_SPI=y CONFIG_SPI_ORION=y # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_DOVE_THERMAL=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y -- 1.7.10.4