[PATCH V4 4/4] dts: Add cpufreq controller node for Exynos5440 SoC

[Amit Daniel Kachhap <amit.daniel@samsung.com>]

Add cpufreq controller device node for Exynos5440 SoC for passing
parameters like controller base address, interrupt and cpufreq
table. This node is added outside cpu0 as this driver is now a platform
driver and a new device structure is needed.

Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
 arch/arm/boot/dts/exynos5440.dtsi      |   12 ++++++++++++
 arch/arm/mach-exynos/mach-exynos5-dt.c |    2 ++
 2 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 5f3562a..4b29a5a 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -63,6 +63,18 @@
 
 	};
 
+	cpufreq@160000 {
+		compatible = "samsung,exynos5440-cpufreq";
+		reg = <0x160000 0x1000>;
+		interrupts = <0 57 0>;
+		operating-points = <
+				/* KHZ	  uV */
+				1200000 1025000
+				1000000 975000
+				800000  925000
+		>;
+	};
+
 	serial@B0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xB0000 0x1000>;
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index acaeb14..0a446c4 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -145,6 +145,8 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 static const struct of_dev_auxdata exynos5440_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5440_PA_UART0,
 				"exynos4210-uart.0", NULL),
+	OF_DEV_AUXDATA("samsung,exynos5440-cpufreq", 0x160000,
+				"exynos5440-cpufreq", NULL),
 	{},
 };
 
-- 
1.7.1