linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Zhang Rui <rui.zhang@intel.com>
To: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Simon <horms@verge.net.au>, Magnus <magnus.damm@gmail.com>,
	linux-pm@vger.kernel.org,
	Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>
Subject: Re: [PATCH 1/2] thermal: rcar: tidyup registration failure case
Date: Mon, 25 Mar 2013 16:40:56 +0800	[thread overview]
Message-ID: <1364200856.2465.48.camel@rzhang1-mobl4> (raw)
In-Reply-To: <874ng0qb9f.wl%kuninori.morimoto.gx@renesas.com>

On Sun, 2013-03-24 at 22:49 -0700, Kuninori Morimoto wrote:
> Current rcar_thermal driver didn't care about rcar_theraml_irq_disable()
> when registration failure case on _probe(), and _remove().
> And, it returns without unregistering thermal zone when
> registration failure case on _probe().
> This patch fixes these issue.
> 
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
>  drivers/thermal/rcar_thermal.c |   20 ++++++++++++++------
>  1 file changed, 14 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
> index 28f0919..359e943 100644
> --- a/drivers/thermal/rcar_thermal.c
> +++ b/drivers/thermal/rcar_thermal.c
> @@ -419,13 +419,15 @@ static int rcar_thermal_probe(struct platform_device *pdev)
>  		priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>  		if (!priv) {
>  			dev_err(dev, "Could not allocate priv\n");
> -			return -ENOMEM;
> +			ret = -ENOMEM;
> +			goto error_unregister;
>  		}
>  
>  		priv->base = devm_request_and_ioremap(dev, res);
>  		if (!priv->base) {
>  			dev_err(dev, "Unable to ioremap priv register\n");
> -			return -ENOMEM;
> +			ret = -ENOMEM;
> +			goto error_unregister;
>  		}
>  
>  		priv->common = common;
> @@ -444,10 +446,10 @@ static int rcar_thermal_probe(struct platform_device *pdev)
>  			goto error_unregister;
>  		}
>  
> -		list_move_tail(&priv->list, &common->head);
> -
>  		if (rcar_has_irq_support(priv))
>  			rcar_thermal_irq_enable(priv);
> +
> +		list_move_tail(&priv->list, &common->head);
>  	}
>  
why do you need this change for the rcar_thermal_irq_disable issue?

thanks,
rui
>  	platform_set_drvdata(pdev, common);
> @@ -457,8 +459,11 @@ static int rcar_thermal_probe(struct platform_device *pdev)
>  	return 0;
>  
>  error_unregister:
> -	rcar_thermal_for_each_priv(priv, common)
> +	rcar_thermal_for_each_priv(priv, common) {
>  		thermal_zone_device_unregister(priv->zone);
> +		if (rcar_has_irq_support(priv))
> +			rcar_thermal_irq_disable(priv);
> +	}
>  
>  	return -ENODEV;
>  }
> @@ -468,8 +473,11 @@ static int rcar_thermal_remove(struct platform_device *pdev)
>  	struct rcar_thermal_common *common = platform_get_drvdata(pdev);
>  	struct rcar_thermal_priv *priv;
>  
> -	rcar_thermal_for_each_priv(priv, common)
> +	rcar_thermal_for_each_priv(priv, common) {
>  		thermal_zone_device_unregister(priv->zone);
> +		if (rcar_has_irq_support(priv))
> +			rcar_thermal_irq_disable(priv);
> +	}
>  
>  	platform_set_drvdata(pdev, NULL);
>  



  reply	other threads:[~2013-03-25  8:41 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-25  5:48 [PATCH 0/2] thermal: rcar: fixup registration failure case Kuninori Morimoto
2013-03-25  5:49 ` [PATCH 1/2] thermal: rcar: tidyup " Kuninori Morimoto, Kuninori Morimoto
2013-03-25  8:40   ` Zhang Rui [this message]
2013-03-26  0:16     ` Kuninori Morimoto
2013-03-26  5:53       ` Kuninori Morimoto
2013-03-26  6:07         ` [PATCH 0/2 v2] thermal: rcar: fixup " Kuninori Morimoto
2013-03-26  6:08           ` [PATCH 1/2 v2] thermal: rcar: tidyup " Kuninori Morimoto
2013-04-02 13:17             ` Zhang Rui
2013-03-26  6:08           ` [PATCH 2/2 v2] thermal: rcar: add pm_runtime_xxx() support Kuninori Morimoto
2013-04-02 13:19             ` Zhang Rui
2013-03-26  6:30           ` [PATCH 0/2 v2] thermal: rcar: fixup registration failure case Zhang Rui
2013-03-26  6:45             ` Kuninori Morimoto
2013-03-25  5:50 ` [PATCH 2/2] thermal: rcar: add pm_runtime_xxx() support Kuninori Morimoto, Kuninori Morimoto

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1364200856.2465.48.camel@rzhang1-mobl4 \
    --to=rui.zhang@intel.com \
    --cc=horms@verge.net.au \
    --cc=kuninori.morimoto.gx@gmail.com \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).