[PATCH 6/9] thermal: exynos: small cleanups to prepare for adding exynos5440 driver

[Amit Daniel Kachhap <amit.daniel@samsung.com>]

Add calib mode, trigger types and trigger_enable array. This is needed
for adding exynos5440 TMU driver.

Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
 drivers/thermal/samsung/exynos4210_thermal.c |   30 ++++++++++++------------
 include/linux/platform_data/exynos_thermal.h |   32 +++++++++++++-------------
 2 files changed, 31 insertions(+), 31 deletions(-)

diff --git a/drivers/thermal/samsung/exynos4210_thermal.c b/drivers/thermal/samsung/exynos4210_thermal.c
index 09ea8c8..58d16ac 100644
--- a/drivers/thermal/samsung/exynos4210_thermal.c
+++ b/drivers/thermal/samsung/exynos4210_thermal.c
@@ -276,10 +276,10 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
 
 	if (on) {
 		con |= EXYNOS_TMU_CORE_ON;
-		interrupt_en = pdata->trigger_level3_en << 12 |
-			pdata->trigger_level2_en << 8 |
-			pdata->trigger_level1_en << 4 |
-			pdata->trigger_level0_en;
+		interrupt_en = pdata->trigger_enable[3] << 12 |
+			pdata->trigger_enable[2] << 8 |
+			pdata->trigger_enable[1] << 4 |
+			pdata->trigger_enable[0];
 		if (pdata->threshold_falling)
 			interrupt_en |= interrupt_en << 16;
 	} else {
@@ -394,10 +394,10 @@ static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
 	.trigger_levels[0] = 5,
 	.trigger_levels[1] = 20,
 	.trigger_levels[2] = 30,
-	.trigger_level0_en = 1,
-	.trigger_level1_en = 1,
-	.trigger_level2_en = 1,
-	.trigger_level3_en = 0,
+	.trigger_enable[0] = 1,
+	.trigger_enable[1] = 1,
+	.trigger_enable[2] = 1,
+	.trigger_enable[3] = 0,
 	.gain = 15,
 	.reference_voltage = 7,
 	.cal_type = TYPE_ONE_POINT_TRIMMING,
@@ -423,10 +423,10 @@ static struct exynos_tmu_platform_data const exynos_default_tmu_data = {
 	.trigger_levels[0] = 85,
 	.trigger_levels[1] = 103,
 	.trigger_levels[2] = 110,
-	.trigger_level0_en = 1,
-	.trigger_level1_en = 1,
-	.trigger_level2_en = 1,
-	.trigger_level3_en = 0,
+	.trigger_enable[0] = 1,
+	.trigger_enable[1] = 1,
+	.trigger_enable[2] = 1,
+	.trigger_enable[3] = 0,
 	.gain = 8,
 	.reference_voltage = 16,
 	.noise_cancel_mode = 4,
@@ -566,9 +566,9 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 
 	/* Register the sensor with thermal management interface */
 	(&exynos_sensor_conf)->driver_data = data;
-	exynos_sensor_conf.trip_data.trip_count = pdata->trigger_level0_en +
-			pdata->trigger_level1_en + pdata->trigger_level2_en +
-			pdata->trigger_level3_en;
+	exynos_sensor_conf.trip_data.trip_count = pdata->trigger_enable[0] +
+			pdata->trigger_enable[1] + pdata->trigger_enable[2] +
+			pdata->trigger_enable[3];
 
 	for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++)
 		exynos_sensor_conf.trip_data.trip_val[i] =
diff --git a/include/linux/platform_data/exynos_thermal.h b/include/linux/platform_data/exynos_thermal.h
index 893b758..1090f48 100644
--- a/include/linux/platform_data/exynos_thermal.h
+++ b/include/linux/platform_data/exynos_thermal.h
@@ -31,6 +31,17 @@ enum calibration_type {
 	TYPE_NONE,
 };
 
+enum calibration_mode {
+	SW_MODE,
+	HW_MODE,
+};
+
+enum trigger_type {
+	ACTIVE,
+	CRITICAL,
+	HW_TRIP,
+};
+
 enum soc_type {
 	SOC_ARCH_EXYNOS4210 = 1,
 	SOC_ARCH_EXYNOS,
@@ -71,18 +82,9 @@ struct freq_clip_table {
  *	3: temperature for trigger_level3 interrupt
  *	   condition for trigger_level3 interrupt:
  *		current temperature > threshold + trigger_levels[3]
- * @trigger_level0_en:
+ * @trigger_enable[]: array to denote which trigger levels are enabled.
  *	1 = enable trigger_level0 interrupt,
  *	0 = disable trigger_level0 interrupt
- * @trigger_level1_en:
- *	1 = enable trigger_level1 interrupt,
- *	0 = disable trigger_level1 interrupt
- * @trigger_level2_en:
- *	1 = enable trigger_level2 interrupt,
- *	0 = disable trigger_level2 interrupt
- * @trigger_level3_en:
- *	1 = enable trigger_level3 interrupt,
- *	0 = disable trigger_level3 interrupt
  * @gain: gain of amplifier in the positive-TC generator block
  *	0 <= gain <= 15
  * @reference_voltage: reference voltage of amplifier
@@ -93,6 +95,7 @@ struct freq_clip_table {
  * @type: determines the type of SOC
  * @efuse_value: platform defined fuse value
  * @cal_type: calibration type for temperature
+ * @cal_mode: calibration mode for temperature
  * @freq_clip_table: Table representing frequency reduction percentage.
  * @freq_tab_count: Count of the above table as frequency reduction may
  *	applicable to only some of the trigger levels.
@@ -103,18 +106,15 @@ struct exynos_tmu_platform_data {
 	u8 threshold;
 	u8 threshold_falling;
 	u8 trigger_levels[MAX_TRIP];
-	bool trigger_level0_en;
-	bool trigger_level1_en;
-	bool trigger_level2_en;
-	bool trigger_level3_en;
-	bool trigger_level4_en;
-
+	enum trigger_type trigger_type[MAX_TRIP];
+	bool trigger_enable[MAX_TRIP];
 	u8 gain;
 	u8 reference_voltage;
 	u8 noise_cancel_mode;
 	u32 efuse_value;
 
 	enum calibration_type cal_type;
+	enum calibration_mode cal_mode;
 	enum soc_type type;
 	struct freq_clip_table freq_tab[MAX_TRIP];
 	unsigned int freq_tab_count;
-- 
1.7.1