linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Amit Daniel Kachhap <amit.daniel@samsung.com>
To: linux-pm@vger.kernel.org
Cc: Zhang Rui <rui.zhang@intel.com>,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
	amit.kachhap@gmail.com, Kukjin Kim <kgene.kim@samsung.com>,
	Eduardo Valentin <eduardo.valentin@ti.com>
Subject: [PATCH V2 15/20] thermal: exynos: Add support to handle many instances of TMU
Date: Fri, 26 Apr 2013 16:07:46 +0530	[thread overview]
Message-ID: <1366972671-9227-16-git-send-email-amit.daniel@samsung.com> (raw)
In-Reply-To: <1366972671-9227-1-git-send-email-amit.daniel@samsung.com>

This patch adds support to handle multiple instances of the TMU controllers.
This is done by removing the static structure to register with the core thermal
and creating it dynamically for each instance of the TMU controller. The
interrupt is made shared type to handle interrupts for all the TMU. Also
the identifier of the TMU controller is extracted from device tree alias.

Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
 drivers/thermal/samsung/exynos_tmu.c |  125 +++++++++++++++++++++++-----------
 1 files changed, 84 insertions(+), 41 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index bdf40ef..94d6e8e 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -29,6 +29,8 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
@@ -36,9 +38,24 @@
 #include "exynos_tmu.h"
 #include "exynos_tmu_data.h"
 
+/**
+ * struct exynos_tmu_data : A structure to hold the private data of the TMU
+	driver
+ * @id: identifier of the one instance of the TMU controller.
+ * @pdata: pointer to the tmu platform/configuration data
+ * @base: base address of the single instance of the TMU controller.
+ * @irq: irq number of the TMU controller.
+ * @soc: id of the SOC type.
+ * @irq_work: pointer to the irq work structure.
+ * @lock: lock to implement synchronization.
+ * @clk: pointer to the clock structure.
+ * @temp_error1: fused value of the first point trim.
+ * @temp_error2: fused value of the second point trim.
+ * @reg_conf: pointer to structure to register with core thermal.
+ */
 struct exynos_tmu_data {
+	int id;
 	struct exynos_tmu_platform_data *pdata;
-	struct resource *mem;
 	void __iomem *base;
 	int irq;
 	enum soc_type soc;
@@ -46,6 +63,7 @@ struct exynos_tmu_data {
 	struct mutex lock;
 	struct clk *clk;
 	u8 temp_error1, temp_error2;
+	struct thermal_sensor_conf *reg_conf;
 };
 
 /*
@@ -319,12 +337,6 @@ static int exynos_tmu_set_emulation(void *drv_data,	unsigned long temp)
 	{ return -EINVAL; }
 #endif/*CONFIG_THERMAL_EMULATION*/
 
-static struct thermal_sensor_conf exynos_sensor_conf = {
-	.name			= "exynos-therm",
-	.read_temperature	= (int (*)(void *))exynos_tmu_read,
-	.write_emul_temp	= exynos_tmu_set_emulation,
-};
-
 static void exynos_tmu_work(struct work_struct *work)
 {
 	struct exynos_tmu_data *data = container_of(work,
@@ -333,7 +345,7 @@ static void exynos_tmu_work(struct work_struct *work)
 	struct exynos_tmu_registers *reg = pdata->registers;
 	unsigned int val_irq;
 
-	exynos_report_trigger(&exynos_sensor_conf);
+	exynos_report_trigger(data->reg_conf);
 	mutex_lock(&data->lock);
 	clk_enable(data->clk);
 
@@ -405,10 +417,42 @@ static inline struct  exynos_tmu_platform_data *exynos_get_driver_data(
 			platform_get_device_id(pdev)->driver_data;
 }
 
+static int exynos_map_dt_data(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	struct resource res;
+
+	if (!data)
+		return -ENODEV;
+
+	data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
+	if (data->id < 0)
+		data->id = 0;
+
+	data->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	if (data->irq <= 0) {
+		dev_err(&pdev->dev, "failed to get IRQ\n");
+		return -ENODEV;
+	}
+
+	if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
+		dev_err(&pdev->dev, "failed to get Resource\n");
+		return -ENODEV;
+	}
+
+	data->base = devm_ioremap(&pdev->dev, res.start, resource_size(&res));
+	if (!data->base) {
+		dev_err(&pdev->dev, "Failed to ioremap memory\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
 static int exynos_tmu_probe(struct platform_device *pdev)
 {
 	struct exynos_tmu_data *data;
 	struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data;
+	struct thermal_sensor_conf *sensor_conf;
 	int ret, i;
 
 	if (!pdata)
@@ -425,26 +469,17 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	data->irq = platform_get_irq(pdev, 0);
-	if (data->irq < 0) {
-		dev_err(&pdev->dev, "Failed to get platform irq\n");
-		return data->irq;
-	}
-
-	INIT_WORK(&data->irq_work, exynos_tmu_work);
-
-	data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!data->mem) {
-		dev_err(&pdev->dev, "Failed to get platform resource\n");
-		return -ENOENT;
-	}
+	data->pdata = pdata;
+	platform_set_drvdata(pdev, data);
+	mutex_init(&data->lock);
 
-	data->base = devm_ioremap_resource(&pdev->dev, data->mem);
-	if (IS_ERR(data->base))
-		return PTR_ERR(data->base);
+	ret = exynos_map_dt_data(pdev);
+	if (ret)
+		return ret;
 
+	INIT_WORK(&data->irq_work, exynos_tmu_work);
 	ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
-		IRQF_TRIGGER_RISING, "exynos-tmu", data);
+		IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
 		return ret;
@@ -469,10 +504,6 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 		goto err_clk;
 	}
 
-	data->pdata = pdata;
-	platform_set_drvdata(pdev, data);
-	mutex_init(&data->lock);
-
 	ret = exynos_tmu_initialize(pdev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to initialize TMU\n");
@@ -481,28 +512,40 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 
 	exynos_tmu_control(pdev, true);
 
-	/* Register the sensor with thermal management interface */
-	(&exynos_sensor_conf)->driver_data = data;
-	exynos_sensor_conf.trip_data.trip_count = pdata->trigger_enable[0] +
+	/* Allocate a structure to register with the exynos core thermal */
+	sensor_conf = devm_kzalloc(&pdev->dev,
+				sizeof(struct thermal_sensor_conf), GFP_KERNEL);
+	if (!sensor_conf) {
+		dev_err(&pdev->dev, "Failed to allocate registration struct\n");
+		ret = -ENOMEM;
+		goto err_clk;
+	}
+	data->reg_conf = sensor_conf;
+	sprintf(sensor_conf->name, "therm_zone%d", data->id);
+	sensor_conf->read_temperature = (int (*)(void *))exynos_tmu_read;
+	sensor_conf->write_emul_temp =
+		(int (*)(void *, unsigned long))exynos_tmu_set_emulation;
+	sensor_conf->driver_data = data;
+	sensor_conf->trip_data.trip_count = pdata->trigger_enable[0] +
 			pdata->trigger_enable[1] + pdata->trigger_enable[2]+
 			pdata->trigger_enable[3];
 
-	for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++)
-		exynos_sensor_conf.trip_data.trip_val[i] =
+	for (i = 0; i < sensor_conf->trip_data.trip_count; i++)
+		sensor_conf->trip_data.trip_val[i] =
 			pdata->threshold + pdata->trigger_levels[i];
 
-	exynos_sensor_conf.trip_data.trigger_falling = pdata->threshold_falling;
+	sensor_conf->trip_data.trigger_falling = pdata->threshold_falling;
 
-	exynos_sensor_conf.cooling_data.freq_clip_count =
-						pdata->freq_tab_count;
+	sensor_conf->cooling_data.freq_clip_count = pdata->freq_tab_count;
 	for (i = 0; i < pdata->freq_tab_count; i++) {
-		exynos_sensor_conf.cooling_data.freq_data[i].freq_clip_max =
+		sensor_conf->cooling_data.freq_data[i].freq_clip_max =
 					pdata->freq_tab[i].freq_clip_max;
-		exynos_sensor_conf.cooling_data.freq_data[i].temp_level =
+		sensor_conf->cooling_data.freq_data[i].temp_level =
 					pdata->freq_tab[i].temp_level;
 	}
 
-	ret = exynos_register_thermal(&exynos_sensor_conf);
+	/* Register the sensor with thermal management interface */
+	ret = exynos_register_thermal(sensor_conf);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to register thermal interface\n");
 		goto err_clk;
@@ -521,7 +564,7 @@ static int exynos_tmu_remove(struct platform_device *pdev)
 
 	exynos_tmu_control(pdev, false);
 
-	exynos_unregister_thermal(&exynos_sensor_conf);
+	exynos_unregister_thermal(data->reg_conf);
 
 	clk_unprepare(data->clk);
 
-- 
1.7.1

  parent reply	other threads:[~2013-04-26 10:37 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-26 10:37 [PATCH V2 0/20] thermal: exynos: Add thermal driver for exynos5440 Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 01/20] thermal: exynos: Moving exynos thermal files into samsung directory Amit Daniel Kachhap
2013-05-06 15:05   ` Zhang Rui
2013-05-07 10:21     ` Tomasz Figa
2013-05-07 13:18       ` amit daniel kachhap
2013-05-07 13:36         ` Tomasz Figa
2013-05-07 13:12     ` amit daniel kachhap
2013-04-26 10:37 ` [PATCH V2 02/20] thermal: exynos: Bifurcate exynos thermal common and tmu controller code Amit Daniel Kachhap
2013-05-06 15:16   ` Zhang Rui
2013-05-07 13:32     ` amit daniel kachhap
2013-04-26 10:37 ` [PATCH V2 03/20] thermal: exynos: Rename exynos_thermal.c to exynos_tmu.c Amit Daniel Kachhap
2013-05-06 15:18   ` Zhang Rui
2013-04-26 10:37 ` [PATCH V2 04/20] thermal: exynos: Move exynos_thermal.h from include/* to driver/* folder Amit Daniel Kachhap
2013-05-06 15:19   ` Zhang Rui
2013-04-26 10:37 ` [PATCH V2 05/20] thermal: exynos: Bifurcate exynos tmu driver and configuration data Amit Daniel Kachhap
2013-05-06 15:28   ` Zhang Rui
2013-04-26 10:37 ` [PATCH V2 06/20] thermal: exynos: Add missing definations and code cleanup Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 07/20] thermal: exynos: Add extra entries in the tmu platform data Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 08/20] thermal: exynos: Support thermal tripping Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 09/20] thermal: exynos: Move register definitions from driver file to data file Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 10/20] thermal: exynos: Fix to clear only the generated interrupts Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 11/20] thermal: exynos: Add support for instance based register/unregister Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 12/20] thermal: exynos: Modify private_data to appropriate name driver_data Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 13/20] thermal: exynos: Return success even if no cooling data supplied Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 14/20] thermal: exynos: Make the zone handling dependent on trip count Amit Daniel Kachhap
2013-04-26 10:37 ` Amit Daniel Kachhap [this message]
2013-04-26 10:37 ` [PATCH V2 16/20] thermal: exynos: Add features to check instead of SOC type Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 17/20] ARM: dts: thermal: exynos4: Add documentation for Exynos SoC thermal bindings Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 18/20] thermal: exynos: Add support for exynos5440 TMU sensor Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 19/20] Documentation: thermal: Explain the exynos thermal driver model Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 20/20] ARM: dts: Add device tree node for exynos5440 TMU controller Amit Daniel Kachhap

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1366972671-9227-16-git-send-email-amit.daniel@samsung.com \
    --to=amit.daniel@samsung.com \
    --cc=amit.kachhap@gmail.com \
    --cc=eduardo.valentin@ti.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).