From: Zhang Rui <rui.zhang@intel.com>
To: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: linux-pm@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
linux-kernel@vger.kernel.org, amit.kachhap@gmail.com,
Kukjin Kim <kgene.kim@samsung.com>,
Eduardo Valentin <eduardo.valentin@ti.com>
Subject: Re: [PATCH V2 01/20] thermal: exynos: Moving exynos thermal files into samsung directory
Date: Mon, 06 May 2013 23:05:06 +0800 [thread overview]
Message-ID: <1367852706.2079.57.camel@rzhang1-mobl4> (raw)
In-Reply-To: <1366972671-9227-2-git-send-email-amit.daniel@samsung.com>
On Fri, 2013-04-26 at 16:07 +0530, Amit Daniel Kachhap wrote:
> This movement of files is done for easy maintenance and adding more
> new sensor's support for exynos platform easily . This will also help in
> bifurcating exynos common, sensor driver and sensor data related parts.
>
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> ---
> drivers/thermal/Kconfig | 13 +++++--------
> drivers/thermal/Makefile | 2 +-
> drivers/thermal/samsung/Kconfig | 9 +++++++++
> drivers/thermal/samsung/Makefile | 4 ++++
> drivers/thermal/{ => samsung}/exynos_thermal.c | 0
> 5 files changed, 19 insertions(+), 9 deletions(-)
> create mode 100644 drivers/thermal/samsung/Kconfig
> create mode 100644 drivers/thermal/samsung/Makefile
> rename drivers/thermal/{ => samsung}/exynos_thermal.c (100%)
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 5e3c025..081ddc5 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -114,14 +114,6 @@ config KIRKWOOD_THERMAL
> Support for the Kirkwood thermal sensor driver into the Linux thermal
> framework. Only kirkwood 88F6282 and 88F6283 have this sensor.
>
> -config EXYNOS_THERMAL
> - tristate "Temperature sensor on Samsung EXYNOS"
> - depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
> - depends on CPU_THERMAL
> - help
> - If you say yes here you get support for TMU (Thermal Management
> - Unit) on SAMSUNG EXYNOS series of SoC.
> -
> config DOVE_THERMAL
> tristate "Temperature sensor on Marvell Dove SoCs"
> depends on ARCH_DOVE
> @@ -169,4 +161,9 @@ config INTEL_POWERCLAMP
> enforce idle time which results in more package C-state residency. The
> user interface is exposed via generic thermal framework.
>
> +menu "Exynos thermal drivers"
would it be more proper to use "Samsung thermal drivers" or "Samsung
Exynos thermal drivers" instead?
> +depends on PLAT_SAMSUNG
> +source "drivers/thermal/samsung/Kconfig"
> +endmenu
> +
sorry I know few about arm,
could you tell me the difference between
CONFIG_ARCH_EXYNOS4/CONFIG_ARCH_EXYNOS5 and CONFIG_PLAT_SAMSUNG please,
I do not see the dependency between these in Kconfig file?
thanks,
rui
> endif
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index c054d41..b3063a9 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -17,7 +17,7 @@ thermal_sys-$(CONFIG_CPU_THERMAL) += cpu_cooling.o
> obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
> obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o
> obj-$(CONFIG_KIRKWOOD_THERMAL) += kirkwood_thermal.o
> -obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
> +obj-y += samsung/
> obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o
> obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
> obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
> diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
> new file mode 100644
> index 0000000..2d3d9dc
> --- /dev/null
> +++ b/drivers/thermal/samsung/Kconfig
> @@ -0,0 +1,9 @@
> +config EXYNOS_THERMAL
> + tristate "Temperature sensor on Samsung EXYNOS"
> + depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
> + depends on CPU_THERMAL
> + help
> + If you say yes here you get support for TMU (Thermal Management
> + Unit) on SAMSUNG EXYNOS series of SoC. This helps in registering
> + the exynos thermal driver with the core thermal layer and cpu
> + cooling API's.
> diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile
> new file mode 100644
> index 0000000..1fe6d93
> --- /dev/null
> +++ b/drivers/thermal/samsung/Makefile
> @@ -0,0 +1,4 @@
> +#
> +# Samsung thermal specific Makefile
> +#
> +obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
> diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/samsung/exynos_thermal.c
> similarity index 100%
> rename from drivers/thermal/exynos_thermal.c
> rename to drivers/thermal/samsung/exynos_thermal.c
next prev parent reply other threads:[~2013-05-06 15:05 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-26 10:37 [PATCH V2 0/20] thermal: exynos: Add thermal driver for exynos5440 Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 01/20] thermal: exynos: Moving exynos thermal files into samsung directory Amit Daniel Kachhap
2013-05-06 15:05 ` Zhang Rui [this message]
2013-05-07 10:21 ` Tomasz Figa
2013-05-07 13:18 ` amit daniel kachhap
2013-05-07 13:36 ` Tomasz Figa
2013-05-07 13:12 ` amit daniel kachhap
2013-04-26 10:37 ` [PATCH V2 02/20] thermal: exynos: Bifurcate exynos thermal common and tmu controller code Amit Daniel Kachhap
2013-05-06 15:16 ` Zhang Rui
2013-05-07 13:32 ` amit daniel kachhap
2013-04-26 10:37 ` [PATCH V2 03/20] thermal: exynos: Rename exynos_thermal.c to exynos_tmu.c Amit Daniel Kachhap
2013-05-06 15:18 ` Zhang Rui
2013-04-26 10:37 ` [PATCH V2 04/20] thermal: exynos: Move exynos_thermal.h from include/* to driver/* folder Amit Daniel Kachhap
2013-05-06 15:19 ` Zhang Rui
2013-04-26 10:37 ` [PATCH V2 05/20] thermal: exynos: Bifurcate exynos tmu driver and configuration data Amit Daniel Kachhap
2013-05-06 15:28 ` Zhang Rui
2013-04-26 10:37 ` [PATCH V2 06/20] thermal: exynos: Add missing definations and code cleanup Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 07/20] thermal: exynos: Add extra entries in the tmu platform data Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 08/20] thermal: exynos: Support thermal tripping Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 09/20] thermal: exynos: Move register definitions from driver file to data file Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 10/20] thermal: exynos: Fix to clear only the generated interrupts Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 11/20] thermal: exynos: Add support for instance based register/unregister Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 12/20] thermal: exynos: Modify private_data to appropriate name driver_data Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 13/20] thermal: exynos: Return success even if no cooling data supplied Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 14/20] thermal: exynos: Make the zone handling dependent on trip count Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 15/20] thermal: exynos: Add support to handle many instances of TMU Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 16/20] thermal: exynos: Add features to check instead of SOC type Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 17/20] ARM: dts: thermal: exynos4: Add documentation for Exynos SoC thermal bindings Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 18/20] thermal: exynos: Add support for exynos5440 TMU sensor Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 19/20] Documentation: thermal: Explain the exynos thermal driver model Amit Daniel Kachhap
2013-04-26 10:37 ` [PATCH V2 20/20] ARM: dts: Add device tree node for exynos5440 TMU controller Amit Daniel Kachhap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1367852706.2079.57.camel@rzhang1-mobl4 \
--to=rui.zhang@intel.com \
--cc=amit.daniel@samsung.com \
--cc=amit.kachhap@gmail.com \
--cc=eduardo.valentin@ti.com \
--cc=kgene.kim@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).