Linux Power Management development
 help / color / mirror / Atom feed
From: Zhang Rui <rui.zhang@intel.com>
To: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
Subject: Re: [RFC 26/42] drivers/thermal: don't check resource with devm_ioremap_resource
Date: Thu, 16 May 2013 15:22:57 +0800	[thread overview]
Message-ID: <1368688977.2063.35.camel@rzhang1-mobl4> (raw)
In-Reply-To: <1368173847-5661-27-git-send-email-wsa@the-dreams.de>

On Fri, 2013-05-10 at 10:17 +0200, Wolfram Sang wrote:
> devm_ioremap_resource does sanity checks on the given resource. No need to
> duplicate this in the driver.
> 
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

applied to thermal -next.

thanks,
rui
> ---
>  drivers/thermal/dove_thermal.c     |   11 +----------
>  drivers/thermal/exynos_thermal.c   |    5 -----
>  drivers/thermal/kirkwood_thermal.c |    7 +------
>  drivers/thermal/rcar_thermal.c     |    6 +-----
>  4 files changed, 3 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/thermal/dove_thermal.c b/drivers/thermal/dove_thermal.c
> index 3078c40..5c53c53 100644
> --- a/drivers/thermal/dove_thermal.c
> +++ b/drivers/thermal/dove_thermal.c
> @@ -133,25 +133,16 @@ static int dove_thermal_probe(struct platform_device *pdev)
>  	struct resource *res;
>  	int ret;
>  
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	if (!res) {
> -		dev_err(&pdev->dev, "Failed to get platform resource\n");
> -		return -ENODEV;
> -	}
> -
>  	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
>  	if (!priv)
>  		return -ENOMEM;
>  
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	priv->sensor = devm_ioremap_resource(&pdev->dev, res);
>  	if (IS_ERR(priv->sensor))
>  		return PTR_ERR(priv->sensor);
>  
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> -	if (!res) {
> -		dev_err(&pdev->dev, "Failed to get platform resource\n");
> -		return -ENODEV;
> -	}
>  	priv->control = devm_ioremap_resource(&pdev->dev, res);
>  	if (IS_ERR(priv->control))
>  		return PTR_ERR(priv->control);
> diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
> index b777ae6..a7bef42 100644
> --- a/drivers/thermal/exynos_thermal.c
> +++ b/drivers/thermal/exynos_thermal.c
> @@ -967,11 +967,6 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>  	INIT_WORK(&data->irq_work, exynos_tmu_work);
>  
>  	data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	if (!data->mem) {
> -		dev_err(&pdev->dev, "Failed to get platform resource\n");
> -		return -ENOENT;
> -	}
> -
>  	data->base = devm_ioremap_resource(&pdev->dev, data->mem);
>  	if (IS_ERR(data->base))
>  		return PTR_ERR(data->base);
> diff --git a/drivers/thermal/kirkwood_thermal.c b/drivers/thermal/kirkwood_thermal.c
> index e5500ed..e3ca1b4 100644
> --- a/drivers/thermal/kirkwood_thermal.c
> +++ b/drivers/thermal/kirkwood_thermal.c
> @@ -75,16 +75,11 @@ static int kirkwood_thermal_probe(struct platform_device *pdev)
>  	struct kirkwood_thermal_priv *priv;
>  	struct resource *res;
>  
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	if (!res) {
> -		dev_err(&pdev->dev, "Failed to get platform resource\n");
> -		return -ENODEV;
> -	}
> -
>  	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
>  	if (!priv)
>  		return -ENOMEM;
>  
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	priv->sensor = devm_ioremap_resource(&pdev->dev, res);
>  	if (IS_ERR(priv->sensor))
>  		return PTR_ERR(priv->sensor);
> diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
> index 2cc5b61..b2217b3 100644
> --- a/drivers/thermal/rcar_thermal.c
> +++ b/drivers/thermal/rcar_thermal.c
> @@ -385,11 +385,6 @@ static int rcar_thermal_probe(struct platform_device *pdev)
>  		 * platform has IRQ support.
>  		 * Then, drier use common register
>  		 */
> -		res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
> -		if (!res) {
> -			dev_err(dev, "Could not get platform resource\n");
> -			return -ENODEV;
> -		}
>  
>  		ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0,
>  				       dev_name(dev), common);
> @@ -401,6 +396,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
>  		/*
>  		 * rcar_has_irq_support() will be enabled
>  		 */
> +		res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
>  		common->base = devm_ioremap_resource(dev, res);
>  		if (IS_ERR(common->base))
>  			return PTR_ERR(common->base);



      parent reply	other threads:[~2013-05-16  7:23 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-10  8:16 [RFC 00/42] devm improvement series, part #1 Wolfram Sang
2013-05-10  8:16 ` [RFC 03/42] drivers/cpufreq: don't check resource with devm_ioremap_resource Wolfram Sang
2013-05-10 11:09   ` Rafael J. Wysocki
2013-05-10  8:17 ` [RFC 26/42] drivers/thermal: " Wolfram Sang
2013-05-10 13:50   ` Eduardo Valentin
2013-05-16  7:22   ` Zhang Rui [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1368688977.2063.35.camel@rzhang1-mobl4 \
    --to=rui.zhang@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox