linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Amit Daniel Kachhap <amit.daniel@samsung.com>
To: linux-pm@vger.kernel.org, Zhang Rui <rui.zhang@intel.com>,
	Eduardo Valentin <eduardo.valentin@ti.com>
Cc: linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
	amit.kachhap@gmail.com, Kukjin Kim <kgene.kim@samsung.com>,
	jonghwa3.lee@samsung.com
Subject: [PATCH V5 20/30] thermal: exynos: use device resource management infrastructure
Date: Tue, 11 Jun 2013 18:23:30 +0530	[thread overview]
Message-ID: <1370955220-2949-21-git-send-email-amit.daniel@samsung.com> (raw)
In-Reply-To: <1370955220-2949-1-git-send-email-amit.daniel@samsung.com>

This patch uses the device pointer stored in the configuration structure
and converts to dev_* prints and devm API's.

Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
---
 drivers/thermal/samsung/exynos_thermal_common.c |   39 ++++++++++++++--------
 1 files changed, 25 insertions(+), 14 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
index 2873ca3..59b47e3 100644
--- a/drivers/thermal/samsung/exynos_thermal_common.c
+++ b/drivers/thermal/samsung/exynos_thermal_common.c
@@ -52,7 +52,8 @@ static int exynos_set_mode(struct thermal_zone_device *thermal,
 {
 	struct exynos_thermal_zone *th_zone = thermal->devdata;
 	if (!th_zone) {
-		pr_notice("thermal zone not registered\n");
+		dev_err(th_zone->sensor_conf->dev,
+			"thermal zone not registered\n");
 		return 0;
 	}
 
@@ -68,8 +69,9 @@ static int exynos_set_mode(struct thermal_zone_device *thermal,
 
 	th_zone->mode = mode;
 	thermal_zone_device_update(thermal);
-	pr_info("thermal polling set for duration=%d msec\n",
-				thermal->polling_delay);
+	dev_dbg(th_zone->sensor_conf->dev,
+		"thermal polling set for duration=%d msec\n",
+		thermal->polling_delay);
 	return 0;
 }
 
@@ -159,7 +161,8 @@ static int exynos_bind(struct thermal_zone_device *thermal,
 		case WARN_ZONE:
 			if (thermal_zone_bind_cooling_device(thermal, i, cdev,
 								level, 0)) {
-				pr_err("error binding cdev inst %d\n", i);
+				dev_err(data->dev,
+					"error unbinding cdev inst=%d\n", i);
 				ret = -EINVAL;
 			}
 			th_zone->bind = true;
@@ -204,7 +207,8 @@ static int exynos_unbind(struct thermal_zone_device *thermal,
 		case WARN_ZONE:
 			if (thermal_zone_unbind_cooling_device(thermal, i,
 								cdev)) {
-				pr_err("error unbinding cdev inst=%d\n", i);
+				dev_err(data->dev,
+					"error unbinding cdev inst=%d\n", i);
 				ret = -EINVAL;
 			}
 			th_zone->bind = false;
@@ -224,7 +228,8 @@ static int exynos_get_temp(struct thermal_zone_device *thermal,
 	void *data;
 
 	if (!th_zone->sensor_conf) {
-		pr_info("Temperature sensor not initialised\n");
+		dev_err(th_zone->sensor_conf->dev,
+			"Temperature sensor not initialised\n");
 		return -EINVAL;
 	}
 	data = th_zone->sensor_conf->driver_data;
@@ -243,7 +248,8 @@ static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
 	struct exynos_thermal_zone *th_zone = thermal->devdata;
 
 	if (!th_zone->sensor_conf) {
-		pr_info("Temperature sensor not initialised\n");
+		dev_err(th_zone->sensor_conf->dev,
+			"Temperature sensor not initialised\n");
 		return -EINVAL;
 	}
 	data = th_zone->sensor_conf->driver_data;
@@ -337,11 +343,13 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
 	struct exynos_thermal_zone *th_zone;
 
 	if (!sensor_conf || !sensor_conf->read_temperature) {
-		pr_err("Temperature sensor not initialised\n");
+		dev_err(sensor_conf->dev,
+				"Temperature sensor not initialised\n");
 		return -EINVAL;
 	}
 
-	th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
+	th_zone = devm_kzalloc(sensor_conf->dev,
+				sizeof(struct exynos_thermal_zone), GFP_KERNEL);
 	if (!th_zone)
 		return -ENOMEM;
 
@@ -350,7 +358,8 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
 		cpumask_set_cpu(0, &mask_val);
 		th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
 		if (IS_ERR(th_zone->cool_dev[0])) {
-			pr_err("Failed to register cpufreq cooling device\n");
+			dev_err(sensor_conf->dev,
+				"Failed to register cpufreq cooling device\n");
 			ret = -EINVAL;
 			goto err_unregister;
 		}
@@ -364,14 +373,16 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
 			IDLE_INTERVAL);
 
 	if (IS_ERR(th_zone->therm_dev)) {
-		pr_err("Failed to register thermal zone device\n");
+		dev_err(sensor_conf->dev,
+			"Failed to register thermal zone device\n");
 		ret = PTR_ERR(th_zone->therm_dev);
 		goto err_unregister;
 	}
 	th_zone->mode = THERMAL_DEVICE_ENABLED;
 	sensor_conf->pzone_data = th_zone;
 
-	pr_info("Exynos: Kernel Thermal management registered\n");
+	dev_info(sensor_conf->dev,
+		"Exynos: Thermal zone(%s) registered\n", sensor_conf->name);
 
 	return 0;
 
@@ -397,6 +408,6 @@ void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf)
 			cpufreq_cooling_unregister(th_zone->cool_dev[i]);
 	}
 
-	kfree(th_zone);
-	pr_info("Exynos: Kernel Thermal management unregistered\n");
+	dev_info(sensor_conf->dev,
+		"Exynos: Kernel Thermal management unregistered\n");
 }
-- 
1.7.1

  parent reply	other threads:[~2013-06-11 12:53 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-11 12:53 [PATCH V5 00/30] thermal: exynos: Add thermal driver for exynos5440 Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 01/30] thermal: exynos: Moving exynos thermal files into samsung directory Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 02/30] thermal: exynos: Add ARCH_HAS_TMU config to know the supported soc's Amit Daniel Kachhap
2013-06-17  3:05   ` Eduardo Valentin
2013-06-17  3:46     ` amit daniel kachhap
2013-06-11 12:53 ` [PATCH V5 03/30] thermal: exynos: Remove CPU_THERMAL dependency for using TMU driver Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 04/30] thermal: exynos: Bifurcate exynos thermal common and tmu controller code Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 05/30] thermal: exynos: Rename exynos_thermal.c to exynos_tmu.c Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 06/30] thermal: exynos: Move exynos_thermal.h from include/* to driver/* folder Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 07/30] thermal: exynos: Bifurcate exynos tmu driver and configuration data Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 08/30] thermal: exynos: Add missing definations and code cleanup Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 09/30] thermal: exynos: Add extra entries in the tmu platform data Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 10/30] thermal: exynos: Move register definitions from driver to data file Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 11/30] thermal: exynos: Support thermal tripping Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 12/30] thermal: exynos: Fix to clear only the generated interrupts Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 13/30] thermal: exynos: Add support for instance based register/unregister Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 14/30] thermal: exynos: Modify private_data to appropriate name driver_data Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 15/30] thermal: exynos: Return success even if no cooling data supplied Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 16/30] thermal: exynos: Make the zone handling use trip information Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 17/30] thermal: exynos: Remove non DT based support Amit Daniel Kachhap
2013-08-07  9:23   ` Naveen Krishna Ch
2013-06-11 12:53 ` [PATCH V5 18/30] thermal: exynos: Add support to handle many instances of TMU Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 19/30] thermal: exynos: Add TMU features to check instead of using SOC type Amit Daniel Kachhap
2013-06-11 12:53 ` Amit Daniel Kachhap [this message]
2013-06-11 12:53 ` [PATCH V5 21/30] ARM: dts: thermal: exynos4: Add documentation for Exynos SoC thermal bindings Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 22/30] thermal: exynos: Add support to access common register for multistance Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 23/30] thermal: exynos: Add driver support for exynos5440 TMU sensor Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 24/30] thermal: exynos: Add thermal configuration data " Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 25/30] thermal: exynos: Fix to set the second point correction value Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 26/30] thermal: exynos: Add hardware mode thermal calibration support Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 27/30] Documentation: thermal: Explain the exynos thermal driver model Amit Daniel Kachhap
2013-06-11 17:22   ` Rob Landley
2013-06-14  4:04     ` amit daniel kachhap
2013-06-11 12:53 ` [PATCH V5 28/30] thermal: exynos: Support for TMU regulator defined at device tree Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 29/30] ARM: dts: Add device tree node for exynos5440 TMU controller Amit Daniel Kachhap
2013-06-11 12:53 ` [PATCH V5 30/30] arm: exynos: enable ARCH_HAS_TMU Amit Daniel Kachhap
2013-06-12  4:09 ` [PATCH V5 00/30] thermal: exynos: Add thermal driver for exynos5440 jonghwa3.lee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1370955220-2949-21-git-send-email-amit.daniel@samsung.com \
    --to=amit.daniel@samsung.com \
    --cc=amit.kachhap@gmail.com \
    --cc=eduardo.valentin@ti.com \
    --cc=jonghwa3.lee@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).