* [PATCH] cpuidle: Add Kconfig.arm and move calxeda and kirkwood
@ 2013-07-03 5:26 kpark3469
2013-07-03 7:38 ` Daniel Lezcano
0 siblings, 1 reply; 2+ messages in thread
From: kpark3469 @ 2013-07-03 5:26 UTC (permalink / raw)
To: linux-pm; +Cc: keun-o.park, rjw
From: Sahara <keun-o.park@windriver.com>
This patch adds Kconfig.arm for cpuidle drivers for ARM. And, this
also moves calxeda and kirkwood to Kconfig.arm. Like cpufreq menu,
"CPU Idle" menu is added to drivers/cpuidle/Kconfig.
Signed-off-by: Sahara <keun-o.park@windriver.com>
---
drivers/cpuidle/Kconfig | 11 ++++++-----
drivers/cpuidle/Kconfig.arm | 15 +++++++++++++++
drivers/cpuidle/Makefile | 6 ++++--
3 files changed, 25 insertions(+), 7 deletions(-)
create mode 100644 drivers/cpuidle/Kconfig.arm
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index c4cc27e..1f16116 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -1,3 +1,4 @@
+menu "CPU Idle"
config CPU_IDLE
bool "CPU idle PM support"
@@ -33,10 +34,10 @@ config ARCH_NEEDS_CPU_IDLE_COUPLED
if CPU_IDLE
-config CPU_IDLE_CALXEDA
- bool "CPU Idle Driver for Calxeda processors"
- depends on ARCH_HIGHBANK
- help
- Select this to enable cpuidle on Calxeda processors.
+menu "ARM CPU Idle Drivers"
+depends on ARM
+source "drivers/cpuidle/Kconfig.arm"
+endmenu
endif
+endmenu
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
new file mode 100644
index 0000000..d335dd8
--- /dev/null
+++ b/drivers/cpuidle/Kconfig.arm
@@ -0,0 +1,15 @@
+#
+# ARM CPU Idle drivers
+#
+
+config ARM_HIGHBANK_CPUIDLE
+ bool "CPU Idle Driver for Calxeda processors"
+ depends on ARCH_HIGHBANK
+ help
+ Select this to enable cpuidle on Calxeda processors.
+
+config ARM_KIRKWOOD_CPUIDLE
+ bool "CPU Idle Driver for Marvell Kirkwood SoCs"
+ depends on ARCH_KIRKWOOD
+ help
+ This adds the CPU Idle driver for Marvell Kirkwood SoCs.
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 0d8bd55..1d7ba91 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -5,5 +5,7 @@
obj-y += cpuidle.o driver.o governor.o sysfs.o governors/
obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
-obj-$(CONFIG_CPU_IDLE_CALXEDA) += cpuidle-calxeda.o
-obj-$(CONFIG_ARCH_KIRKWOOD) += cpuidle-kirkwood.o
+##################################################################################
+# ARM SoC drivers
+obj-$(CONFIG_ARM_HIGHBANK_CPUIDLE) += cpuidle-calxeda.o
+obj-$(CONFIG_ARM_KIRKWOOD_CPUIDLE) += cpuidle-kirkwood.o
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] cpuidle: Add Kconfig.arm and move calxeda and kirkwood
2013-07-03 5:26 [PATCH] cpuidle: Add Kconfig.arm and move calxeda and kirkwood kpark3469
@ 2013-07-03 7:38 ` Daniel Lezcano
0 siblings, 0 replies; 2+ messages in thread
From: Daniel Lezcano @ 2013-07-03 7:38 UTC (permalink / raw)
To: kpark3469; +Cc: linux-pm, keun-o.park, rjw
On 07/03/2013 07:26 AM, kpark3469@gmail.com wrote:
> From: Sahara <keun-o.park@windriver.com>
>
> This patch adds Kconfig.arm for cpuidle drivers for ARM. And, this
> also moves calxeda and kirkwood to Kconfig.arm. Like cpufreq menu,
> "CPU Idle" menu is added to drivers/cpuidle/Kconfig.
>
> Signed-off-by: Sahara <keun-o.park@windriver.com>
> ---
That sounds reasonable.
Please respin your patch on top of linux-pm-next and send it to me, I
will queue it in my tree. Rafael is not accepting any new material until
-rc1.
Thanks
-- Daniel
> drivers/cpuidle/Kconfig | 11 ++++++-----
> drivers/cpuidle/Kconfig.arm | 15 +++++++++++++++
> drivers/cpuidle/Makefile | 6 ++++--
> 3 files changed, 25 insertions(+), 7 deletions(-)
> create mode 100644 drivers/cpuidle/Kconfig.arm
>
> diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
> index c4cc27e..1f16116 100644
> --- a/drivers/cpuidle/Kconfig
> +++ b/drivers/cpuidle/Kconfig
> @@ -1,3 +1,4 @@
> +menu "CPU Idle"
>
> config CPU_IDLE
> bool "CPU idle PM support"
> @@ -33,10 +34,10 @@ config ARCH_NEEDS_CPU_IDLE_COUPLED
>
> if CPU_IDLE
>
> -config CPU_IDLE_CALXEDA
> - bool "CPU Idle Driver for Calxeda processors"
> - depends on ARCH_HIGHBANK
> - help
> - Select this to enable cpuidle on Calxeda processors.
> +menu "ARM CPU Idle Drivers"
> +depends on ARM
> +source "drivers/cpuidle/Kconfig.arm"
> +endmenu
>
> endif
> +endmenu
> diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
> new file mode 100644
> index 0000000..d335dd8
> --- /dev/null
> +++ b/drivers/cpuidle/Kconfig.arm
> @@ -0,0 +1,15 @@
> +#
> +# ARM CPU Idle drivers
> +#
> +
> +config ARM_HIGHBANK_CPUIDLE
> + bool "CPU Idle Driver for Calxeda processors"
> + depends on ARCH_HIGHBANK
> + help
> + Select this to enable cpuidle on Calxeda processors.
> +
> +config ARM_KIRKWOOD_CPUIDLE
> + bool "CPU Idle Driver for Marvell Kirkwood SoCs"
> + depends on ARCH_KIRKWOOD
> + help
> + This adds the CPU Idle driver for Marvell Kirkwood SoCs.
> diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
> index 0d8bd55..1d7ba91 100644
> --- a/drivers/cpuidle/Makefile
> +++ b/drivers/cpuidle/Makefile
> @@ -5,5 +5,7 @@
> obj-y += cpuidle.o driver.o governor.o sysfs.o governors/
> obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
>
> -obj-$(CONFIG_CPU_IDLE_CALXEDA) += cpuidle-calxeda.o
> -obj-$(CONFIG_ARCH_KIRKWOOD) += cpuidle-kirkwood.o
> +##################################################################################
> +# ARM SoC drivers
> +obj-$(CONFIG_ARM_HIGHBANK_CPUIDLE) += cpuidle-calxeda.o
> +obj-$(CONFIG_ARM_KIRKWOOD_CPUIDLE) += cpuidle-kirkwood.o
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-07-03 7:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-07-03 5:26 [PATCH] cpuidle: Add Kconfig.arm and move calxeda and kirkwood kpark3469
2013-07-03 7:38 ` Daniel Lezcano
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).