[PATCH] thermal: new asus driver

[PATCH] thermal: new asus driver

[Felipe Contreras]

Simple driver to enable control of the fan in ASUS laptops. So far this
has only been tested in ASUS Zenbook Prime UX31A, but according to some
online reference [1], it should work in other models as well.

Another source was a patch acpi4asus-user's mailing list [2].

[1]
http://forum.notebookreview.com/asus/705656-fan-control-asus-prime-ux31-ux31a-ux32a-ux32vd.html
[2]
http://www.mail-archive.com/acpi4asus-user@lists.sourceforge.net/msg00065.html

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
---

I've never implemented a driver like this, so I've no idea if this is the right way to do it.

 drivers/thermal/Kconfig        |  7 ++++
 drivers/thermal/Makefile       |  1 +
 drivers/thermal/asus_thermal.c | 94 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 102 insertions(+)
 create mode 100644 drivers/thermal/asus_thermal.c

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index e988c81..0c5b624 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -184,4 +184,11 @@ menu "Texas Instruments thermal drivers"
 source "drivers/thermal/ti-soc-thermal/Kconfig"
 endmenu
 
+config ASUS_THERMAL
+	tristate "ASUS thermal driver"
+	depends on THERMAL
+	depends on X86
+	help
+	  Enables control of the fan in ASUS laptops.
+
 endif
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 67184a2..ab4ea6f 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -25,3 +25,4 @@ obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o
 obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
 obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
 obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
+obj-$(CONFIG_ASUS_THERMAL)	+= asus_thermal.o
diff --git a/drivers/thermal/asus_thermal.c b/drivers/thermal/asus_thermal.c
new file mode 100644
index 0000000..eceeee3
--- /dev/null
+++ b/drivers/thermal/asus_thermal.c
@@ -0,0 +1,94 @@
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/thermal.h>
+#include <linux/dmi.h>
+
+MODULE_AUTHOR("Felipe Contreras <felipe.contreras@gmail.com>");
+MODULE_DESCRIPTION("ASUS fan driver");
+MODULE_LICENSE("GPL");
+
+static struct thermal_cooling_device *cdev;
+
+static int fan_get_max_state(struct thermal_cooling_device *cdev,
+		unsigned long *state)
+{
+	*state = 0xff;
+	return 0;
+}
+
+static int fan_get_cur_state(struct thermal_cooling_device *cdev,
+		unsigned long *state)
+{
+	struct acpi_object_list params;
+	union acpi_object in_objs[1];
+	unsigned long long value;
+	acpi_status r;
+
+	params.count = ARRAY_SIZE(in_objs);
+	params.pointer = in_objs;
+	in_objs[0].type = ACPI_TYPE_INTEGER;
+	in_objs[0].integer.value = 0;
+
+	r = acpi_evaluate_integer(NULL, "\\_TZ.RFAN", &params, &value);
+	if (r != AE_OK)
+		return r;
+
+	*state = value;
+
+	return 0;
+}
+
+static int fan_set(struct thermal_cooling_device *cdev, int fan, int speed)
+{
+	struct acpi_object_list params;
+	union acpi_object in_objs[2];
+	unsigned long long value;
+
+	params.count = ARRAY_SIZE(in_objs);
+	params.pointer = in_objs;
+	in_objs[0].type = ACPI_TYPE_INTEGER;
+	in_objs[0].integer.value = fan;
+	in_objs[1].type = ACPI_TYPE_INTEGER;
+	in_objs[1].integer.value = speed;
+
+	return acpi_evaluate_integer(NULL, "\\_SB.PCI0.LPCB.EC0.SFNV", &params, &value);
+}
+
+static int fan_set_cur_state(struct thermal_cooling_device *cdev,
+		unsigned long state)
+{
+	return fan_set(cdev, 1, state);
+}
+
+static int fan_set_auto(struct thermal_cooling_device *cdev)
+{
+	return fan_set(cdev, 0, 0);
+}
+
+static const struct thermal_cooling_device_ops fan_cooling_ops = {
+	.get_max_state = fan_get_max_state,
+	.get_cur_state = fan_get_cur_state,
+	.set_cur_state = fan_set_cur_state,
+};
+
+static int __init fan_init(void)
+{
+	if (strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "ASUSTeK COMPUTER INC."))
+		return -ENODEV;
+	cdev = thermal_cooling_device_register("Fan", NULL, &fan_cooling_ops);
+	if (IS_ERR(cdev))
+		return PTR_ERR(cdev);
+	fan_set_auto(cdev);
+	return 0;
+}
+
+static void __exit fan_exit(void)
+{
+	fan_set_auto(cdev);
+	thermal_cooling_device_unregister(cdev);
+}
+
+module_init(fan_init);
+module_exit(fan_exit);
-- 
1.8.3.267.gbb4989f

Re: [PATCH] thermal: new asus driver

[Zhang Rui]

On 二, 2013-08-06 at 17:48 -0500, Felipe Contreras wrote:
> Simple driver to enable control of the fan in ASUS laptops. So far this
> has only been tested in ASUS Zenbook Prime UX31A, but according to some
> online reference [1], it should work in other models as well.
> 
I'd rather prefer to do this in the vendor driver like asus-laptop.c.
Say, it is the asus-laptop driver that knows the fan control ability of
the platform and register to the thermal framework.

> Another source was a patch acpi4asus-user's mailing list [2].
> 
> [1]
> http://forum.notebookreview.com/asus/705656-fan-control-asus-prime-ux31-ux31a-ux32a-ux32vd.html
> [2]
> http://www.mail-archive.com/acpi4asus-user@lists.sourceforge.net/msg00065.html
> 
> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
> ---
> 
> I've never implemented a driver like this, so I've no idea if this is the right way to do it.
> 
>  drivers/thermal/Kconfig        |  7 ++++
>  drivers/thermal/Makefile       |  1 +
>  drivers/thermal/asus_thermal.c | 94 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 102 insertions(+)
>  create mode 100644 drivers/thermal/asus_thermal.c
> 
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index e988c81..0c5b624 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -184,4 +184,11 @@ menu "Texas Instruments thermal drivers"
>  source "drivers/thermal/ti-soc-thermal/Kconfig"
>  endmenu
>  
> +config ASUS_THERMAL
> +	tristate "ASUS thermal driver"
> +	depends on THERMAL
> +	depends on X86
> +	help
> +	  Enables control of the fan in ASUS laptops.
> +
>  endif
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 67184a2..ab4ea6f 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -25,3 +25,4 @@ obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o
>  obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
>  obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
>  obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
> +obj-$(CONFIG_ASUS_THERMAL)	+= asus_thermal.o
> diff --git a/drivers/thermal/asus_thermal.c b/drivers/thermal/asus_thermal.c
> new file mode 100644
> index 0000000..eceeee3
> --- /dev/null
> +++ b/drivers/thermal/asus_thermal.c
> @@ -0,0 +1,94 @@
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/acpi.h>
> +#include <linux/thermal.h>
> +#include <linux/dmi.h>
> +
> +MODULE_AUTHOR("Felipe Contreras <felipe.contreras@gmail.com>");
> +MODULE_DESCRIPTION("ASUS fan driver");
> +MODULE_LICENSE("GPL");
> +
> +static struct thermal_cooling_device *cdev;
> +
> +static int fan_get_max_state(struct thermal_cooling_device *cdev,
> +		unsigned long *state)
> +{
> +	*state = 0xff;
> +	return 0;
> +}
> +
> +static int fan_get_cur_state(struct thermal_cooling_device *cdev,
> +		unsigned long *state)
> +{
> +	struct acpi_object_list params;
> +	union acpi_object in_objs[1];
> +	unsigned long long value;
> +	acpi_status r;
> +
> +	params.count = ARRAY_SIZE(in_objs);
> +	params.pointer = in_objs;
> +	in_objs[0].type = ACPI_TYPE_INTEGER;
> +	in_objs[0].integer.value = 0;
> +
> +	r = acpi_evaluate_integer(NULL, "\\_TZ.RFAN", &params, &value);
> +	if (r != AE_OK)
> +		return r;
> +
> +	*state = value;
> +
> +	return 0;
> +}
> +
> +static int fan_set(struct thermal_cooling_device *cdev, int fan, int speed)
> +{
> +	struct acpi_object_list params;
> +	union acpi_object in_objs[2];
> +	unsigned long long value;
> +
> +	params.count = ARRAY_SIZE(in_objs);
> +	params.pointer = in_objs;
> +	in_objs[0].type = ACPI_TYPE_INTEGER;
> +	in_objs[0].integer.value = fan;
> +	in_objs[1].type = ACPI_TYPE_INTEGER;
> +	in_objs[1].integer.value = speed;
> +
> +	return acpi_evaluate_integer(NULL, "\\_SB.PCI0.LPCB.EC0.SFNV", &params, &value);
> +}
> +
I checked a couple of BIOS, and it seems that both of these two methods
can be invoked by ATKD.WMNB indirectly.
So I'm wondering if it is proper to invoke these two methods directly,
and if these are some features/functionalities that are still missing in
the asus-laptop driver.

CC Corentin and Matthew.

thanks,
rui
> +static int fan_set_cur_state(struct thermal_cooling_device *cdev,
> +		unsigned long state)
> +{
> +	return fan_set(cdev, 1, state);
> +}
> +
> +static int fan_set_auto(struct thermal_cooling_device *cdev)
> +{
> +	return fan_set(cdev, 0, 0);
> +}
> +
> +static const struct thermal_cooling_device_ops fan_cooling_ops = {
> +	.get_max_state = fan_get_max_state,
> +	.get_cur_state = fan_get_cur_state,
> +	.set_cur_state = fan_set_cur_state,
> +};
> +
> +static int __init fan_init(void)
> +{
> +	if (strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "ASUSTeK COMPUTER INC."))
> +		return -ENODEV;
> +	cdev = thermal_cooling_device_register("Fan", NULL, &fan_cooling_ops);
> +	if (IS_ERR(cdev))
> +		return PTR_ERR(cdev);
> +	fan_set_auto(cdev);
> +	return 0;
> +}
> +
> +static void __exit fan_exit(void)
> +{
> +	fan_set_auto(cdev);
> +	thermal_cooling_device_unregister(cdev);
> +}
> +
> +module_init(fan_init);
> +module_exit(fan_exit);

Re: [PATCH] thermal: new asus driver

[Zhang Rui]

On 四, 2013-08-15 at 15:22 +0800, Zhang Rui wrote:
> On 二, 2013-08-06 at 17:48 -0500, Felipe Contreras wrote:
> > Simple driver to enable control of the fan in ASUS laptops. So far this
> > has only been tested in ASUS Zenbook Prime UX31A, but according to some
> > online reference [1], it should work in other models as well.
> > 
> I'd rather prefer to do this in the vendor driver like asus-laptop.c.
> Say, it is the asus-laptop driver that knows the fan control ability of
> the platform and register to the thermal framework.
> 
> > Another source was a patch acpi4asus-user's mailing list [2].
> > 
> > [1]
> > http://forum.notebookreview.com/asus/705656-fan-control-asus-prime-ux31-ux31a-ux32a-ux32vd.html
> > [2]
> > http://www.mail-archive.com/acpi4asus-user@lists.sourceforge.net/msg00065.html
> > 
> > Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
> > ---
> > 
> > I've never implemented a driver like this, so I've no idea if this is the right way to do it.
> > 
> >  drivers/thermal/Kconfig        |  7 ++++
> >  drivers/thermal/Makefile       |  1 +
> >  drivers/thermal/asus_thermal.c | 94 ++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 102 insertions(+)
> >  create mode 100644 drivers/thermal/asus_thermal.c
> > 
> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> > index e988c81..0c5b624 100644
> > --- a/drivers/thermal/Kconfig
> > +++ b/drivers/thermal/Kconfig
> > @@ -184,4 +184,11 @@ menu "Texas Instruments thermal drivers"
> >  source "drivers/thermal/ti-soc-thermal/Kconfig"
> >  endmenu
> >  
> > +config ASUS_THERMAL
> > +	tristate "ASUS thermal driver"
> > +	depends on THERMAL
> > +	depends on X86
> > +	help
> > +	  Enables control of the fan in ASUS laptops.
> > +
> >  endif
> > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> > index 67184a2..ab4ea6f 100644
> > --- a/drivers/thermal/Makefile
> > +++ b/drivers/thermal/Makefile
> > @@ -25,3 +25,4 @@ obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o
> >  obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
> >  obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
> >  obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
> > +obj-$(CONFIG_ASUS_THERMAL)	+= asus_thermal.o
> > diff --git a/drivers/thermal/asus_thermal.c b/drivers/thermal/asus_thermal.c
> > new file mode 100644
> > index 0000000..eceeee3
> > --- /dev/null
> > +++ b/drivers/thermal/asus_thermal.c
> > @@ -0,0 +1,94 @@
> > +#include <linux/module.h>
> > +#include <linux/kernel.h>
> > +#include <linux/init.h>
> > +#include <linux/acpi.h>
> > +#include <linux/thermal.h>
> > +#include <linux/dmi.h>
> > +
> > +MODULE_AUTHOR("Felipe Contreras <felipe.contreras@gmail.com>");
> > +MODULE_DESCRIPTION("ASUS fan driver");
> > +MODULE_LICENSE("GPL");
> > +
> > +static struct thermal_cooling_device *cdev;
> > +
> > +static int fan_get_max_state(struct thermal_cooling_device *cdev,
> > +		unsigned long *state)
> > +{
> > +	*state = 0xff;
> > +	return 0;
> > +}
> > +
> > +static int fan_get_cur_state(struct thermal_cooling_device *cdev,
> > +		unsigned long *state)
> > +{
> > +	struct acpi_object_list params;
> > +	union acpi_object in_objs[1];
> > +	unsigned long long value;
> > +	acpi_status r;
> > +
> > +	params.count = ARRAY_SIZE(in_objs);
> > +	params.pointer = in_objs;
> > +	in_objs[0].type = ACPI_TYPE_INTEGER;
> > +	in_objs[0].integer.value = 0;
> > +
> > +	r = acpi_evaluate_integer(NULL, "\\_TZ.RFAN", &params, &value);
> > +	if (r != AE_OK)
> > +		return r;
> > +
> > +	*state = value;
> > +
> > +	return 0;
> > +}
> > +
> > +static int fan_set(struct thermal_cooling_device *cdev, int fan, int speed)
> > +{
> > +	struct acpi_object_list params;
> > +	union acpi_object in_objs[2];
> > +	unsigned long long value;
> > +
> > +	params.count = ARRAY_SIZE(in_objs);
> > +	params.pointer = in_objs;
> > +	in_objs[0].type = ACPI_TYPE_INTEGER;
> > +	in_objs[0].integer.value = fan;
> > +	in_objs[1].type = ACPI_TYPE_INTEGER;
> > +	in_objs[1].integer.value = speed;
> > +
> > +	return acpi_evaluate_integer(NULL, "\\_SB.PCI0.LPCB.EC0.SFNV", &params, &value);
> > +}
> > +
> I checked a couple of BIOS, and it seems that both of these two methods
> can be invoked by ATKD.WMNB indirectly.
> So I'm wondering if it is proper to invoke these two methods directly,
> and if these are some features/functionalities that are still missing in
> the asus-laptop driver.
> 
> CC Corentin and Matthew.
> 
CC x86 platform drivers mailing list as well.

> thanks,
> rui
> > +static int fan_set_cur_state(struct thermal_cooling_device *cdev,
> > +		unsigned long state)
> > +{
> > +	return fan_set(cdev, 1, state);
> > +}
> > +
> > +static int fan_set_auto(struct thermal_cooling_device *cdev)
> > +{
> > +	return fan_set(cdev, 0, 0);
> > +}
> > +
> > +static const struct thermal_cooling_device_ops fan_cooling_ops = {
> > +	.get_max_state = fan_get_max_state,
> > +	.get_cur_state = fan_get_cur_state,
> > +	.set_cur_state = fan_set_cur_state,
> > +};
> > +
> > +static int __init fan_init(void)
> > +{
> > +	if (strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "ASUSTeK COMPUTER INC."))
> > +		return -ENODEV;
> > +	cdev = thermal_cooling_device_register("Fan", NULL, &fan_cooling_ops);
> > +	if (IS_ERR(cdev))
> > +		return PTR_ERR(cdev);
> > +	fan_set_auto(cdev);
> > +	return 0;
> > +}
> > +
> > +static void __exit fan_exit(void)
> > +{
> > +	fan_set_auto(cdev);
> > +	thermal_cooling_device_unregister(cdev);
> > +}
> > +
> > +module_init(fan_init);
> > +module_exit(fan_exit);
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] thermal: new asus driver

[Felipe Contreras]

On Thu, Aug 15, 2013 at 2:22 AM, Zhang Rui <rui.zhang@intel.com> wrote:
> On 二, 2013-08-06 at 17:48 -0500, Felipe Contreras wrote:
>> Simple driver to enable control of the fan in ASUS laptops. So far this
>> has only been tested in ASUS Zenbook Prime UX31A, but according to some
>> online reference [1], it should work in other models as well.
>>
> I'd rather prefer to do this in the vendor driver like asus-laptop.c.
> Say, it is the asus-laptop driver that knows the fan control ability of
> the platform and register to the thermal framework.

But asus-laptop doesn't work on this machine. I presume asus-wmi
wouldn't work on some other machines.

I think this is a completely different thing.

>> +static int fan_get_cur_state(struct thermal_cooling_device *cdev,
>> +             unsigned long *state)
>> +{
>> +     struct acpi_object_list params;
>> +     union acpi_object in_objs[1];
>> +     unsigned long long value;
>> +     acpi_status r;
>> +
>> +     params.count = ARRAY_SIZE(in_objs);
>> +     params.pointer = in_objs;
>> +     in_objs[0].type = ACPI_TYPE_INTEGER;
>> +     in_objs[0].integer.value = 0;
>> +
>> +     r = acpi_evaluate_integer(NULL, "\\_TZ.RFAN", &params, &value);
>> +     if (r != AE_OK)
>> +             return r;
>> +
>> +     *state = value;
>> +
>> +     return 0;
>> +}
>> +
>> +static int fan_set(struct thermal_cooling_device *cdev, int fan, int speed)
>> +{
>> +     struct acpi_object_list params;
>> +     union acpi_object in_objs[2];
>> +     unsigned long long value;
>> +
>> +     params.count = ARRAY_SIZE(in_objs);
>> +     params.pointer = in_objs;
>> +     in_objs[0].type = ACPI_TYPE_INTEGER;
>> +     in_objs[0].integer.value = fan;
>> +     in_objs[1].type = ACPI_TYPE_INTEGER;
>> +     in_objs[1].integer.value = speed;
>> +
>> +     return acpi_evaluate_integer(NULL, "\\_SB.PCI0.LPCB.EC0.SFNV", &params, &value);
>> +}
>> +
> I checked a couple of BIOS, and it seems that both of these two methods
> can be invoked by ATKD.WMNB indirectly.
> So I'm wondering if it is proper to invoke these two methods directly,
> and if these are some features/functionalities that are still missing in
> the asus-laptop driver.

I don't know what that means. From what I can see asus-laptop is not
meant to work on all ASUS laptops, and indeed it doesn't work on this
one.

-- 
Felipe Contreras