[PATCH 0/2] remove newly introduced calls to cpuidle_idle_call()

[PATCH 0/2] remove newly introduced calls to cpuidle_idle_call()

[Nicolas Pitre]

Peter/Ingo: Those should probably go into tip as soon as possible
to follow what I already sent earlier.  These are new references to
cpuidle_idle_call that were introduced since -rc1.
 

[PATCH 1/2] cpuidle/powernv: remove redundant cpuidle_idle_call()

[Nicolas Pitre]

The core idle loop now takes care of it. We need to add the runlatch
function calls to the idle routines which was earlier taken care of by
the arch specific idle routine.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Reviewed-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/powerpc/platforms/powernv/setup.c | 13 +------------
 drivers/cpuidle/cpuidle-powernv.c      |  5 +++++
 2 files changed, 6 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 110f4fbd31..81a7a0a79b 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -26,7 +26,6 @@
 #include <linux/of_fdt.h>
 #include <linux/interrupt.h>
 #include <linux/bug.h>
-#include <linux/cpuidle.h>
 #include <linux/pci.h>
 
 #include <asm/machdep.h>
@@ -225,16 +224,6 @@ static int __init pnv_probe(void)
 	return 1;
 }
 
-void powernv_idle(void)
-{
-	/* Hook to cpuidle framework if available, else
-	 * call on default platform idle code
-	 */
-	if (cpuidle_idle_call()) {
-		power7_idle();
-	}
-}
-
 define_machine(powernv) {
 	.name			= "PowerNV",
 	.probe			= pnv_probe,
@@ -244,7 +233,7 @@ define_machine(powernv) {
 	.show_cpuinfo		= pnv_show_cpuinfo,
 	.progress		= pnv_progress,
 	.machine_shutdown	= pnv_shutdown,
-	.power_save             = powernv_idle,
+	.power_save             = power7_idle,
 	.calibrate_decr		= generic_calibrate_decr,
 	.dma_set_mask		= pnv_dma_set_mask,
 #ifdef CONFIG_KEXEC
diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c
index 78fd174c57..f48607cd25 100644
--- a/drivers/cpuidle/cpuidle-powernv.c
+++ b/drivers/cpuidle/cpuidle-powernv.c
@@ -14,6 +14,7 @@
 
 #include <asm/machdep.h>
 #include <asm/firmware.h>
+#include <asm/runlatch.h>
 
 struct cpuidle_driver powernv_idle_driver = {
 	.name             = "powernv_idle",
@@ -30,12 +31,14 @@ static int snooze_loop(struct cpuidle_device *dev,
 	local_irq_enable();
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
+	ppc64_runlatch_off();
 	while (!need_resched()) {
 		HMT_low();
 		HMT_very_low();
 	}
 
 	HMT_medium();
+	ppc64_runlatch_on();
 	clear_thread_flag(TIF_POLLING_NRFLAG);
 	smp_mb();
 	return index;
@@ -45,7 +48,9 @@ static int nap_loop(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			int index)
 {
+	ppc64_runlatch_off();
 	power7_idle();
+	ppc64_runlatch_on();
 	return index;
 }
 
-- 
1.8.4.108.g55ea5f6

[PATCH 2/2] cpuidle/arm64: remove redundant cpuidle_idle_call()

[Nicolas Pitre]

The core idle loop now takes care of it.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/arm64/kernel/process.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 1c0a9be2ff..9cce0098f4 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -33,7 +33,6 @@
 #include <linux/kallsyms.h>
 #include <linux/init.h>
 #include <linux/cpu.h>
-#include <linux/cpuidle.h>
 #include <linux/elfcore.h>
 #include <linux/pm.h>
 #include <linux/tick.h>
@@ -94,10 +93,8 @@ void arch_cpu_idle(void)
 	 * This should do all the clock switching and wait for interrupt
 	 * tricks
 	 */
-	if (cpuidle_idle_call()) {
-		cpu_do_idle();
-		local_irq_enable();
-	}
+	cpu_do_idle();
+	local_irq_enable();
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-- 
1.8.4.108.g55ea5f6