From mboxrd@z Thu Jan 1 00:00:00 1970 From: Punit Agrawal Subject: [PATCH] thermal: Bind cooling devices with the correct arguments Date: Tue, 3 Jun 2014 10:59:58 +0100 Message-ID: <1401789598-14967-1-git-send-email-punit.agrawal@arm.com> Return-path: Received: from fw-tnat.cambridge.arm.com ([217.140.96.21]:51802 "EHLO cam-smtp0.cambridge.arm.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750810AbaFCKA7 (ORCPT ); Tue, 3 Jun 2014 06:00:59 -0400 Sender: linux-pm-owner@vger.kernel.org List-Id: linux-pm@vger.kernel.org To: Eduardo Valentin Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, Zhang Rui , Punit Agrawal When binding cooling devices to thermal zones created from the device tree the minimum and maximum cooling states are in the wrong order leading to failure to bind. Fix the order of cooling states in the call to thermal_zone_bind_cooling_device to fix this. Cc:Zhang Rui Signed-off-by: Punit Agrawal --- Hi Eduardo, I am hoping this can be picked up for 3.16 as a bug fix. Thanks, Punit drivers/thermal/of-thermal.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index 04b1be7..97d312f 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -156,8 +156,8 @@ static int of_thermal_bind(struct thermal_zone_device *thermal, ret = thermal_zone_bind_cooling_device(thermal, tbp->trip_id, cdev, - tbp->min, - tbp->max); + tbp->max, + tbp->min); if (ret) return ret; } -- 1.7.10.4