From: Zhang Rui <rui.zhang@intel.com>
To: Mikko Perttunen <mperttunen@nvidia.com>
Cc: edubezval@gmail.com, swarren@wwwdotorg.org,
thierry.reding@gmail.com, pdeschrijver@nvidia.com,
mlongnecker@nvidia.com, linux-pm@vger.kernel.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/6] of-thermal hardware trip points + Tegra124 SOCTHERM driver
Date: Mon, 21 Jul 2014 15:42:29 +0800 [thread overview]
Message-ID: <1405928549.2455.2.camel@rzhang1-toshiba> (raw)
In-Reply-To: <1403856699-2140-1-git-send-email-mperttunen@nvidia.com>
Hi, Eduardo,
what do you think of this patch set?
thanks,
rui
On Fri, 2014-06-27 at 11:11 +0300, Mikko Perttunen wrote:
> Hi everyone,
>
> this series adds support for hardware-tracked thermal trip points
> for the device tree thermal framework and introduces a new Tegra124 thermal
> driver that uses them.
>
> Hardware-tracked trip points are trip points that do not need to be polled;
> the hardware gives an interrupt when the trip point is reached. The device
> tree thermal framework has not previously given the sensor driver any
> information about set trip points, so using these has been impossible.
> This series adds a new callback from of-thermal to the driver to allow telling
> the driver about trip points. The driver only needs to track two trip points,
> the framework ensures that the current temperature lies between those two.
> Behavior for drivers that do not include this callback is unchanged.
>
> The Tegra124 SOCTHERM thermal driver that is included exposes four thermal zones
> (the thermctl thermal zones) with hardware-tracked trip point support. While the
> hardware supports four tracked trip points, only one is used.
>
> Mikko Perttunen (6):
> thermal: of: Add support for hardware-tracked trip points
> of: Add bindings for nvidia,tegra124-soctherm
> ARM: tegra: Add thermal trip points for Jetson TK1
> ARM: tegra: Add soctherm and thermal zones to Tegra124 device tree
> clk: tegra: Add soctherm and tsensor clocks to Tegra124 init table
> thermal: Add Tegra SOCTHERM thermal management driver
>
> .../devicetree/bindings/thermal/tegra-soctherm.txt | 32 ++
> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 32 ++
> arch/arm/boot/dts/tegra124.dtsi | 48 ++
> drivers/clk/tegra/clk-tegra124.c | 2 +
> drivers/thermal/Kconfig | 7 +
> drivers/thermal/Makefile | 1 +
> drivers/thermal/of-thermal.c | 97 +++-
> drivers/thermal/tegra_soctherm.c | 553 +++++++++++++++++++++
> include/dt-bindings/thermal/tegra124-soctherm.h | 15 +
> include/linux/thermal.h | 3 +-
> 10 files changed, 785 insertions(+), 5 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
> create mode 100644 drivers/thermal/tegra_soctherm.c
> create mode 100644 include/dt-bindings/thermal/tegra124-soctherm.h
>
prev parent reply other threads:[~2014-07-21 7:42 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-27 8:11 [PATCH 0/6] of-thermal hardware trip points + Tegra124 SOCTHERM driver Mikko Perttunen
2014-06-27 8:11 ` [PATCH 1/6] thermal: of: Add support for hardware-tracked trip points Mikko Perttunen
2014-06-30 21:08 ` Stephen Warren
2014-07-01 7:27 ` Mikko Perttunen
2014-07-01 18:15 ` Stephen Warren
2014-07-03 14:15 ` Mikko Perttunen
2014-07-21 23:53 ` Matthew Longnecker
2014-07-30 14:16 ` Eduardo Valentin
2014-08-01 11:42 ` Mikko Perttunen
[not found] ` <53DB7D0D.1070508-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-08-01 13:15 ` edubezval-Re5JQEeQqe8AvxtiuMwx3w
2014-06-27 8:11 ` [PATCH 2/6] of: Add bindings for nvidia,tegra124-soctherm Mikko Perttunen
[not found] ` <1403856699-2140-3-git-send-email-mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-06-30 20:40 ` Stephen Warren
2014-06-27 8:11 ` [PATCH 3/6] ARM: tegra: Add thermal trip points for Jetson TK1 Mikko Perttunen
2014-06-30 20:45 ` Stephen Warren
2014-06-27 8:11 ` [PATCH 4/6] ARM: tegra: Add soctherm and thermal zones to Tegra124 device tree Mikko Perttunen
[not found] ` <1403856699-2140-5-git-send-email-mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-06-30 20:48 ` Stephen Warren
2014-07-01 7:49 ` Mikko Perttunen
2014-07-21 23:12 ` Matthew Longnecker
2014-07-21 23:13 ` Matthew Longnecker
[not found] ` <1403856699-2140-1-git-send-email-mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-06-27 8:11 ` [PATCH 5/6] clk: tegra: Add soctherm and tsensor clocks to Tegra124 init table Mikko Perttunen
2014-06-27 12:18 ` Peter De Schrijver
2014-06-27 8:11 ` [PATCH 6/6] thermal: Add Tegra SOCTHERM thermal management driver Mikko Perttunen
2014-06-30 21:23 ` Stephen Warren
2014-07-01 8:06 ` Mikko Perttunen
[not found] ` <53B26BF2.7090009-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-07-01 18:26 ` Stephen Warren
2014-07-03 13:51 ` Mikko Perttunen
[not found] ` <1403856699-2140-7-git-send-email-mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-07-01 23:47 ` Tuomas Tynkkynen
2014-07-04 8:43 ` Wei Ni
2014-07-04 11:52 ` Mikko Perttunen
2014-07-21 7:42 ` Zhang Rui [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405928549.2455.2.camel@rzhang1-toshiba \
--to=rui.zhang@intel.com \
--cc=edubezval@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mlongnecker@nvidia.com \
--cc=mperttunen@nvidia.com \
--cc=pdeschrijver@nvidia.com \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).