From: Guenter Roeck <linux@roeck-us.net>
To: Sebastian Reichel <sre@kernel.org>
Cc: linux-pm@vger.kernel.org,
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Santosh Shilimkar <santosh.shilimkar@ti.com>,
linux-kernel@vger.kernel.org, Guenter Roeck <linux@roeck-us.net>,
Marc Carino <marc.ceeeee@gmail.com>,
Brian Norris <computersforpeace@gmail.com>
Subject: [PATCH 10/10] power/reset: brcmstb: Register with kernel restart handler
Date: Fri, 26 Sep 2014 17:57:18 -0700 [thread overview]
Message-ID: <1411779438-23127-11-git-send-email-linux@roeck-us.net> (raw)
In-Reply-To: <1411779438-23127-1-git-send-email-linux@roeck-us.net>
Register with kernel restart handler instead of setting arm_pm_restart directly.
Cc: Marc Carino <marc.ceeeee@gmail.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/power/reset/brcmstb-reboot.c | 26 ++++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/power/reset/brcmstb-reboot.c b/drivers/power/reset/brcmstb-reboot.c
index 3f23692..3306241 100644
--- a/drivers/power/reset/brcmstb-reboot.c
+++ b/drivers/power/reset/brcmstb-reboot.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/jiffies.h>
+#include <linux/notifier.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
@@ -26,8 +27,6 @@
#include <linux/smp.h>
#include <linux/mfd/syscon.h>
-#include <asm/system_misc.h>
-
#define RESET_SOURCE_ENABLE_REG 1
#define SW_MASTER_RESET_REG 2
@@ -35,7 +34,8 @@ static struct regmap *regmap;
static u32 rst_src_en;
static u32 sw_mstr_rst;
-static void brcmstb_reboot(enum reboot_mode mode, const char *cmd)
+static int brcmstb_restart_handler(struct notifier_block *this,
+ unsigned long mode, void *cmd)
{
int rc;
u32 tmp;
@@ -43,31 +43,38 @@ static void brcmstb_reboot(enum reboot_mode mode, const char *cmd)
rc = regmap_write(regmap, rst_src_en, 1);
if (rc) {
pr_err("failed to write rst_src_en (%d)\n", rc);
- return;
+ return NOTIFY_DONE;
}
rc = regmap_read(regmap, rst_src_en, &tmp);
if (rc) {
pr_err("failed to read rst_src_en (%d)\n", rc);
- return;
+ return NOTIFY_DONE;
}
rc = regmap_write(regmap, sw_mstr_rst, 1);
if (rc) {
pr_err("failed to write sw_mstr_rst (%d)\n", rc);
- return;
+ return NOTIFY_DONE;
}
rc = regmap_read(regmap, sw_mstr_rst, &tmp);
if (rc) {
pr_err("failed to read sw_mstr_rst (%d)\n", rc);
- return;
+ return NOTIFY_DONE;
}
while (1)
;
+
+ return NOTIFY_DONE;
}
+static struct notifier_block brcmstb_restart_nb = {
+ .notifier_call = brcmstb_restart_handler,
+ .priority = 128,
+};
+
static int brcmstb_reboot_probe(struct platform_device *pdev)
{
int rc;
@@ -93,7 +100,10 @@ static int brcmstb_reboot_probe(struct platform_device *pdev)
return -EINVAL;
}
- arm_pm_restart = brcmstb_reboot;
+ rc = register_restart_handler(&brcmstb_restart_nb);
+ if (rc)
+ dev_err(&pdev->dev,
+ "cannot register restart handler (err=%d)\n", rc);
return 0;
}
--
1.9.1
prev parent reply other threads:[~2014-09-27 0:57 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-27 0:57 [PATCH 00/10] power/reset: Register drivers with restart handler Guenter Roeck
2014-09-27 0:57 ` [PATCH 01/10] power/reset: vexpress: Register with kernel " Guenter Roeck
2014-09-27 0:57 ` [PATCH 02/10] power/reset: xgene: Return -ENOMEM if out of memory Guenter Roeck
2014-09-27 0:57 ` [PATCH 03/10] power/reset: xgene: Drop devm_kfree Guenter Roeck
2014-09-27 0:57 ` [PATCH 04/10] power/reset: xgene: Use local variable dev instead of pdev->dev Guenter Roeck
2014-09-27 0:57 ` [PATCH 05/10] power/reset: xgene: Use mdelay instead of jiffies based timeout Guenter Roeck
2014-09-27 0:57 ` [PATCH 06/10] power/reset: xgene: Register with kernel restart handler Guenter Roeck
2014-09-27 0:57 ` [PATCH 07/10] power/reset: axxia: " Guenter Roeck
2014-09-29 8:40 ` Anders Berg
2014-09-27 0:57 ` [PATCH 08/10] power/reset: keystone: " Guenter Roeck
2014-09-28 22:57 ` Santosh Shilimkar
2014-09-29 13:53 ` Ivan Khoronzhuk
2014-09-29 15:11 ` Guenter Roeck
2014-09-27 0:57 ` [PATCH 09/10] power/reset: hisi: " Guenter Roeck
2014-09-27 0:57 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411779438-23127-11-git-send-email-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=computersforpeace@gmail.com \
--cc=dbaryshkov@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=marc.ceeeee@gmail.com \
--cc=santosh.shilimkar@ti.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).