From: Guenter Roeck <linux@roeck-us.net>
To: linux-kernel@vger.kernel.org
Cc: linux-pm@vger.kernel.org, Guenter Roeck <linux@roeck-us.net>,
Samuel Ortiz <sameo@linux.intel.com>,
Lee Jones <lee.jones@linaro.org>,
linux-omap@vger.kernel.org
Subject: [PATCH v6 14/48] mfd: tps80031: Register with kernel power-off handler
Date: Sun, 9 Nov 2014 17:42:31 -0800 [thread overview]
Message-ID: <1415583785-6980-15-git-send-email-linux@roeck-us.net> (raw)
In-Reply-To: <1415583785-6980-1-git-send-email-linux@roeck-us.net>
Register with kernel power-off handler instead of setting pm_power_off
directly. Register with low priority to reflect that the original code
only sets pm_power_off if it was not already set.
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: linux-omap@vger.kernel.org
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v6:
- This patch: No change.
Global: Replaced priority defines with enum.
v5:
- Rebase to v3.18-rc3
v4:
- Do not use notifiers but internal functions and data structures to manage
the list of power-off handlers. Drop unused parameters from callbacks, and
make the power-off function type void
v3:
- Replace poweroff in all newly introduced variables and in text
with power_off or power-off as appropriate
- Replace POWEROFF_PRIORITY_xxx with POWER_OFF_PRIORITY_xxx
v2:
- Use define to specify poweroff handler priority
- Use dev_warn instead of dev_err
drivers/mfd/tps80031.c | 27 +++++++++++++++------------
include/linux/mfd/tps80031.h | 2 ++
2 files changed, 17 insertions(+), 12 deletions(-)
diff --git a/drivers/mfd/tps80031.c b/drivers/mfd/tps80031.c
index ed6c5b0..996fd7c 100644
--- a/drivers/mfd/tps80031.c
+++ b/drivers/mfd/tps80031.c
@@ -147,7 +147,6 @@ static const struct tps80031_pupd_data tps80031_pupds[] = {
[TPS80031_CTLI2C_SCL] = PUPD_DATA(4, 0, BIT(2)),
[TPS80031_CTLI2C_SDA] = PUPD_DATA(4, 0, BIT(3)),
};
-static struct tps80031 *tps80031_power_off_dev;
int tps80031_ext_power_req_config(struct device *dev,
unsigned long ext_ctrl_flag, int preq_bit,
@@ -209,11 +208,14 @@ int tps80031_ext_power_req_config(struct device *dev,
}
EXPORT_SYMBOL_GPL(tps80031_ext_power_req_config);
-static void tps80031_power_off(void)
+static void tps80031_power_off(struct power_off_handler_block *this)
{
- dev_info(tps80031_power_off_dev->dev, "switching off PMU\n");
- tps80031_write(tps80031_power_off_dev->dev, TPS80031_SLAVE_ID1,
- TPS80031_PHOENIX_DEV_ON, TPS80031_DEVOFF);
+ struct tps80031 *tps80031 = container_of(this, struct tps80031,
+ power_off_hb);
+
+ dev_info(tps80031->dev, "switching off PMU\n");
+ tps80031_write(tps80031->dev, TPS80031_SLAVE_ID1,
+ TPS80031_PHOENIX_DEV_ON, TPS80031_DEVOFF);
}
static void tps80031_pupd_init(struct tps80031 *tps80031,
@@ -501,9 +503,13 @@ static int tps80031_probe(struct i2c_client *client,
goto fail_mfd_add;
}
- if (pdata->use_power_off && !pm_power_off) {
- tps80031_power_off_dev = tps80031;
- pm_power_off = tps80031_power_off;
+ if (pdata->use_power_off) {
+ tps80031->power_off_hb.handler = tps80031_power_off;
+ tps80031->power_off_hb.priority = POWER_OFF_PRIORITY_LOW;
+ ret = register_power_off_handler(&tps80031->power_off_hb);
+ if (ret)
+ dev_warn(&client->dev,
+ "Failed to register power-off handler\n");
}
return 0;
@@ -523,10 +529,7 @@ static int tps80031_remove(struct i2c_client *client)
struct tps80031 *tps80031 = i2c_get_clientdata(client);
int i;
- if (tps80031_power_off_dev == tps80031) {
- tps80031_power_off_dev = NULL;
- pm_power_off = NULL;
- }
+ unregister_power_off_handler(&tps80031->power_off_hb);
mfd_remove_devices(tps80031->dev);
diff --git a/include/linux/mfd/tps80031.h b/include/linux/mfd/tps80031.h
index 2c75c9c..5716077 100644
--- a/include/linux/mfd/tps80031.h
+++ b/include/linux/mfd/tps80031.h
@@ -24,6 +24,7 @@
#define __LINUX_MFD_TPS80031_H
#include <linux/device.h>
+#include <linux/pm.h>
#include <linux/regmap.h>
/* Pull-ups/Pull-downs */
@@ -513,6 +514,7 @@ struct tps80031 {
struct i2c_client *clients[TPS80031_NUM_SLAVES];
struct regmap *regmap[TPS80031_NUM_SLAVES];
struct regmap_irq_chip_data *irq_data;
+ struct power_off_handler_block power_off_hb;
};
struct tps80031_pupd_init_data {
--
1.9.1
next prev parent reply other threads:[~2014-11-10 1:42 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-10 1:42 [PATCH v6 00/48] kernel: Add support for power-off handler call chain Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 01/48] " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 02/48] memory: emif: Use API function to determine power-off capability Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 03/48] hibernate: Call have_kernel_power_off instead of checking pm_power_off Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 04/48] m68k: Replace mach_power_off with pm_power_off Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 05/48] mfd: as3722: Drop reference to pm_power_off from devicetree bindings Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 06/48] gpio-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 07/48] qnap-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 08/48] kernel: Move pm_power_off to common code Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 09/48] mfd: palmas: Register with kernel power-off handler Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 10/48] mfd: axp20x: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 11/48] mfd: retu: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 12/48] mfd: ab8500-sysctrl: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 13/48] mfd: max8907: " Guenter Roeck
2014-11-10 1:42 ` Guenter Roeck [this message]
2014-11-10 1:42 ` [PATCH v6 15/48] mfd: dm355evm_msp: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 16/48] mfd: tps6586x: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 17/48] mfd: tps65910: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 18/48] mfd: twl4030-power: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 19/48] mfd: rk808: Register power-off handler " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 20/48] mfd: rn5t618: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 21/48] ipmi: Register " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 22/48] power/reset: restart-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 23/48] power/reset: gpio-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 24/48] power/reset: as3722-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 25/48] power/reset: qnap-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 26/48] power/reset: msm-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 27/48] power/reset: vexpress-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 28/48] power/reset: at91-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 29/48] power/reset: ltc2952-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 30/48] x86: iris: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 31/48] x86: apm: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 32/48] x86: olpc: Register xo1 power-off handler " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 33/48] staging: nvec: Register " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 34/48] acpi: Register power-off handler " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 35/48] arm: Register " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 36/48] arm64: psci: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 37/48] avr32: atngw100: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 38/48] ia64: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 39/48] m68k: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 40/48] mips: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 41/48] powerpc: " Guenter Roeck
2014-11-11 7:42 ` Michael Ellerman
2014-11-11 10:42 ` Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 42/48] sh: " Guenter Roeck
2014-11-10 1:43 ` [PATCH v6 43/48] x86: lguest: " Guenter Roeck
2014-11-10 1:43 ` [PATCH v6 44/48] x86: ce4100: " Guenter Roeck
2014-11-10 1:43 ` [PATCH v6 45/48] x86: intel-mid: Drop registration of dummy power-off handlers Guenter Roeck
2014-11-10 1:43 ` [PATCH v6 46/48] x86: pmc_atom: Register power-off handler with kernel power-off handler Guenter Roeck
2014-11-10 1:43 ` [PATCH v6 47/48] efi: " Guenter Roeck
2014-11-10 1:43 ` [PATCH v6 48/48] kernel: Remove pm_power_off Guenter Roeck
2014-11-10 8:33 ` [PATCH v6 00/48] kernel: Add support for power-off handler call chain Pavel Machek
2014-11-10 14:12 ` Guenter Roeck
2014-11-11 18:20 ` Guenter Roeck
2014-11-11 18:50 ` Pavel Machek
2014-11-11 19:17 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415583785-6980-15-git-send-email-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).