From: Guenter Roeck <linux@roeck-us.net>
To: linux-kernel@vger.kernel.org
Cc: linux-pm@vger.kernel.org, Guenter Roeck <linux@roeck-us.net>,
Chris Zhong <zyw@rock-chips.com>,
Zhang Qing <zhangqing@rock-chips.com>,
Lee Jones <lee.jones@linaro.org>,
Samuel Ortiz <sameo@linux.intel.com>
Subject: [PATCH v6 19/48] mfd: rk808: Register power-off handler with kernel power-off handler
Date: Sun, 9 Nov 2014 17:42:36 -0800 [thread overview]
Message-ID: <1415583785-6980-20-git-send-email-linux@roeck-us.net> (raw)
In-Reply-To: <1415583785-6980-1-git-send-email-linux@roeck-us.net>
Register with kernel power-off handler instead of setting pm_power_off
directly. Register with low priority to reflect that the original code
only sets pm_power_off if it was not already set.
Cc: Chris Zhong <zyw@rock-chips.com>
Cc: Zhang Qing <zhangqing@rock-chips.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v6:
- This patch: No change.
Global: Replaced priority defines with enum.
v5:
- Rebase to v3.18-rc3
v4:
- Do not use notifiers but internal functions and data structures to manage
the list of power-off handlers. Drop unused parameters from callbacks, and
make the power-off function type void
v3:
- Replace poweroff in all newly introduced variables and in text
with power_off or power-off as appropriate
- Replace POWEROFF_PRIORITY_xxx with POWER_OFF_PRIORITY_xxx
v2:
- New patch
drivers/mfd/rk808.c | 26 ++++++++++++--------------
include/linux/mfd/rk808.h | 2 ++
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index bd02150..93ffcf0 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -21,6 +21,7 @@
#include <linux/mfd/rk808.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
+#include <linux/pm.h>
#include <linux/regmap.h>
struct rk808_reg_data {
@@ -147,23 +148,16 @@ static struct regmap_irq_chip rk808_irq_chip = {
.init_ack_masked = true,
};
-static struct i2c_client *rk808_i2c_client;
-static void rk808_device_shutdown(void)
+static void rk808_device_shutdown(struct power_off_handler_block *this)
{
+ struct rk808 *rk808 = container_of(this, struct rk808, power_off_hb);
int ret;
- struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
-
- if (!rk808) {
- dev_warn(&rk808_i2c_client->dev,
- "have no rk808, so do nothing here\n");
- return;
- }
ret = regmap_update_bits(rk808->regmap,
RK808_DEVCTRL_REG,
DEV_OFF_RST, DEV_OFF_RST);
if (ret)
- dev_err(&rk808_i2c_client->dev, "power off error!\n");
+ dev_err(&rk808->i2c->dev, "power off error!\n");
}
static int rk808_probe(struct i2c_client *client,
@@ -222,9 +216,14 @@ static int rk808_probe(struct i2c_client *client,
pm_off = of_property_read_bool(np,
"rockchip,system-power-controller");
- if (pm_off && !pm_power_off) {
- rk808_i2c_client = client;
- pm_power_off = rk808_device_shutdown;
+ if (pm_off) {
+ rk808->power_off_hb.handler = rk808_device_shutdown;
+ rk808->power_off_hb.priority = POWER_OFF_PRIORITY_LOW;
+ ret = devm_register_power_off_handler(&client->dev,
+ &rk808->power_off_hb);
+ if (ret)
+ dev_warn(&client->dev,
+ "Failed to register power-off handler\n");
}
return 0;
@@ -240,7 +239,6 @@ static int rk808_remove(struct i2c_client *client)
regmap_del_irq_chip(client->irq, rk808->irq_data);
mfd_remove_devices(&client->dev);
- pm_power_off = NULL;
return 0;
}
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index fb09312..a6619f2 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -19,6 +19,7 @@
#ifndef __LINUX_REGULATOR_rk808_H
#define __LINUX_REGULATOR_rk808_H
+#include <linux/pm.h>
#include <linux/regulator/machine.h>
#include <linux/regmap.h>
@@ -192,5 +193,6 @@ struct rk808 {
struct i2c_client *i2c;
struct regmap_irq_chip_data *irq_data;
struct regmap *regmap;
+ struct power_off_handler_block power_off_hb;
};
#endif /* __LINUX_REGULATOR_rk808_H */
--
1.9.1
next prev parent reply other threads:[~2014-11-10 1:42 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-10 1:42 [PATCH v6 00/48] kernel: Add support for power-off handler call chain Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 01/48] " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 02/48] memory: emif: Use API function to determine power-off capability Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 03/48] hibernate: Call have_kernel_power_off instead of checking pm_power_off Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 04/48] m68k: Replace mach_power_off with pm_power_off Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 05/48] mfd: as3722: Drop reference to pm_power_off from devicetree bindings Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 06/48] gpio-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 07/48] qnap-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 08/48] kernel: Move pm_power_off to common code Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 09/48] mfd: palmas: Register with kernel power-off handler Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 10/48] mfd: axp20x: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 11/48] mfd: retu: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 12/48] mfd: ab8500-sysctrl: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 13/48] mfd: max8907: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 14/48] mfd: tps80031: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 15/48] mfd: dm355evm_msp: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 16/48] mfd: tps6586x: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 17/48] mfd: tps65910: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 18/48] mfd: twl4030-power: " Guenter Roeck
2014-11-10 1:42 ` Guenter Roeck [this message]
2014-11-10 1:42 ` [PATCH v6 20/48] mfd: rn5t618: Register power-off handler " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 21/48] ipmi: Register " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 22/48] power/reset: restart-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 23/48] power/reset: gpio-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 24/48] power/reset: as3722-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 25/48] power/reset: qnap-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 26/48] power/reset: msm-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 27/48] power/reset: vexpress-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 28/48] power/reset: at91-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 29/48] power/reset: ltc2952-poweroff: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 30/48] x86: iris: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 31/48] x86: apm: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 32/48] x86: olpc: Register xo1 power-off handler " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 33/48] staging: nvec: Register " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 34/48] acpi: Register power-off handler " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 35/48] arm: Register " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 36/48] arm64: psci: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 37/48] avr32: atngw100: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 38/48] ia64: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 39/48] m68k: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 40/48] mips: " Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 41/48] powerpc: " Guenter Roeck
2014-11-11 7:42 ` Michael Ellerman
2014-11-11 10:42 ` Guenter Roeck
2014-11-10 1:42 ` [PATCH v6 42/48] sh: " Guenter Roeck
2014-11-10 1:43 ` [PATCH v6 43/48] x86: lguest: " Guenter Roeck
2014-11-10 1:43 ` [PATCH v6 44/48] x86: ce4100: " Guenter Roeck
2014-11-10 1:43 ` [PATCH v6 45/48] x86: intel-mid: Drop registration of dummy power-off handlers Guenter Roeck
2014-11-10 1:43 ` [PATCH v6 46/48] x86: pmc_atom: Register power-off handler with kernel power-off handler Guenter Roeck
2014-11-10 1:43 ` [PATCH v6 47/48] efi: " Guenter Roeck
2014-11-10 1:43 ` [PATCH v6 48/48] kernel: Remove pm_power_off Guenter Roeck
2014-11-10 8:33 ` [PATCH v6 00/48] kernel: Add support for power-off handler call chain Pavel Machek
2014-11-10 14:12 ` Guenter Roeck
2014-11-11 18:20 ` Guenter Roeck
2014-11-11 18:50 ` Pavel Machek
2014-11-11 19:17 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415583785-6980-20-git-send-email-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=zhangqing@rock-chips.com \
--cc=zyw@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).