From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Subject: [PATCH v6 13/18] thermal: dts: exynos: Trip points and sensor configuration data for Exynos5440 Date: Fri, 23 Jan 2015 13:10:05 +0100 Message-ID: <1422015010-11918-13-git-send-email-l.majewski@samsung.com> References: <1421666462-7606-1-git-send-email-l.majewski@samsung.com> <1422015010-11918-1-git-send-email-l.majewski@samsung.com> Return-path: Received: from mailout4.samsung.com ([203.254.224.34]:37115 "EHLO mailout4.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753058AbbAWMMK (ORCPT ); Fri, 23 Jan 2015 07:12:10 -0500 In-reply-to: <1422015010-11918-1-git-send-email-l.majewski@samsung.com> Sender: linux-pm-owner@vger.kernel.org List-Id: linux-pm@vger.kernel.org To: Eduardo Valentin , Zhang Rui , Kukjin Kim , Kukjin Kim Cc: Linux PM list , "linux-samsung-soc@vger.kernel.org" , Bartlomiej Zolnierkiewicz , Lukasz Majewski , Amit Daniel Kachhap , Abhilash Kesavan , Abhilash Kesavan , Chanwoo Choi , Viresh Kumar , Lukasz Majewski This commit provides information about Exynos5440 device configuration. Previously this information was available in exynos_tmu_data.c file. Now it is available in the device tree. Such approach allows reusing some common code for thermal. Signed-off-by: Lukasz Majewski --- Changes for v2: - None Changes for v3: - "type" property removed - "samsung,tmu_" prefix for TMU specific properties has been added Changes for v4: - None Changes for v5: - None Changes for v6: - None --- arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi | 24 ++++++++++++++++++++++ arch/arm/boot/dts/exynos5440-trip-points.dtsi | 25 +++++++++++++++++++++++ 2 files changed, 49 insertions(+) create mode 100644 arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi create mode 100644 arch/arm/boot/dts/exynos5440-trip-points.dtsi diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi new file mode 100644 index 0000000..7b2fba0 --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi @@ -0,0 +1,24 @@ +/* + * Device tree sources for Exynos5440 TMU sensor configuration + * + * Copyright (c) 2014 Lukasz Majewski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <5>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <0x5d2d>; +samsung,tmu_min_efuse_value = <16>; +samsung,tmu_max_efuse_value = <76>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <70>; +samsung,tmu_default_temp_offset = <25>; +samsung,tmu_cal_type = ; diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi new file mode 100644 index 0000000..48adfa8 --- /dev/null +++ b/arch/arm/boot/dts/exynos5440-trip-points.dtsi @@ -0,0 +1,25 @@ +/* + * Device tree sources for default Exynos5440 thermal zone definition + * + * Copyright (c) 2014 Lukasz Majewski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +polling-delay-passive = <0>; +polling-delay = <0>; +trips { + cpu-alert-0 { + temperature = <100000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "active"; + }; + cpu-crit-0 { + temperature = <1050000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; +}; -- 2.0.0.rc2