From: Leo Yan <leo.yan@linaro.org>
To: Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <edubezval@gmail.com>,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Leo Yan <leo.yan@linaro.org>
Subject: [PATCH] thermal: fix the casting issue for long type
Date: Thu, 26 Feb 2015 14:01:32 +0800 [thread overview]
Message-ID: <1424930492-22658-1-git-send-email-leo.yan@linaro.org> (raw)
When enable the thermal on arm64 platform, it will report failure when
call function *thermal_zone_bind_cooling_device()*.
The failure is caused by casting. If dtb specify the minimum cooling
state and maximum cooling state as THERMAL_NO_LIMIT, then variables
"lower" and "upper" equal to 0x0000_0000_ffff_fffff after casting the
value from "unsigned int" to "unsigned long".
Finally in kernel if check the variables "lower" and "upper", it will
never equal to (-1UL), or 0xffff_ffff_ffff_fffff.
So change to use "unsigned int" type, this can be compatible for 32 bits
and 64 bits system.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
drivers/thermal/of-thermal.c | 4 ++--
drivers/thermal/thermal_core.c | 6 +++---
include/linux/thermal.h | 2 +-
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index 668fb1b..b50c4e1 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -49,8 +49,8 @@ struct __thermal_bind_params {
struct device_node *cooling_device;
unsigned int trip_id;
unsigned int usage;
- unsigned long min;
- unsigned long max;
+ unsigned int min;
+ unsigned int max;
};
/**
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 48491d1..04de575 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -923,7 +923,7 @@ thermal_cooling_device_trip_point_show(struct device *dev,
int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
int trip,
struct thermal_cooling_device *cdev,
- unsigned long upper, unsigned long lower)
+ unsigned int upper, unsigned int lower)
{
struct thermal_instance *dev;
struct thermal_instance *pos;
@@ -952,8 +952,8 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
return ret;
/* lower default 0, upper default max_state */
- lower = lower == THERMAL_NO_LIMIT ? 0 : lower;
- upper = upper == THERMAL_NO_LIMIT ? max_state : upper;
+ lower = lower == (unsigned int)THERMAL_NO_LIMIT ? 0 : lower;
+ upper = upper == (unsigned int)THERMAL_NO_LIMIT ? max_state : upper;
if (lower > upper || upper > max_state)
return -EINVAL;
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index fc52e30..a2afe04 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -321,7 +321,7 @@ void thermal_zone_device_unregister(struct thermal_zone_device *);
int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
struct thermal_cooling_device *,
- unsigned long, unsigned long);
+ unsigned int, unsigned int);
int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int,
struct thermal_cooling_device *);
void thermal_zone_device_update(struct thermal_zone_device *);
--
1.9.1
next reply other threads:[~2015-02-26 6:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-26 6:01 Leo Yan [this message]
2015-02-26 10:24 ` [PATCH] thermal: fix the casting issue for long type Punit Agrawal
2015-02-26 12:23 ` Leo Yan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1424930492-22658-1-git-send-email-leo.yan@linaro.org \
--to=leo.yan@linaro.org \
--cc=edubezval@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).