From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mikko Perttunen Subject: [PATCH v8 12/18] ARM: tegra: Enable the DFLL on the Jetson TK1 Date: Sun, 1 Mar 2015 14:44:35 +0200 Message-ID: <1425213881-5262-13-git-send-email-mikko.perttunen@kapsi.fi> References: <1425213881-5262-1-git-send-email-mikko.perttunen@kapsi.fi> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1425213881-5262-1-git-send-email-mikko.perttunen@kapsi.fi> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: swarren@wwwdotorg.org, thierry.reding@gmail.com, gnurou@gmail.com, pdeschrijver@nvidia.com, rjw@rjwysocki.net, viresh.kumar@linaro.org Cc: pgaikwad@nvidia.com, mturquette@linaro.org, vinceh@nvidia.com, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, tuomas.tynkkynen@iki.fi, Mikko Perttunen , Tuomas Tynkkynen , pwalmsley@nvidia.com, linux-tegra@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: linux-pm@vger.kernel.org From: Tuomas Tynkkynen Add the board-specific properties of the DFLL for the Jetson TK1 board. On this board, the DFLL will take control of the sd0 regulator on the on-board AS3722 PMIC. Signed-off-by: Tuomas Tynkkynen Signed-off-by: Mikko Perttunen --- v8: - Changed dfll@ -> clock@ arch/arm/boot/dts/tegra124-jetson-tk1.dts | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index dbfaba0..f0888dd 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1509,7 +1509,7 @@ vin-ldo9-10-supply = <&vdd_5v0_sys>; vin-ldo11-supply = <&vdd_3v3_run>; - sd0 { + vdd_cpu: sd0 { regulator-name = "+VDD_CPU_AP"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1400000>; @@ -1737,6 +1737,13 @@ non-removable; }; + /* CPU DFLL clock */ + clock@0,70110000 { + status = "okay"; + vdd-cpu-supply = <&vdd_cpu>; + nvidia,i2c-fs-rate = <400000>; + }; + ahub@0,70300000 { i2s@0,70301100 { status = "okay"; -- 2.3.0