From: Mikko Perttunen <mikko.perttunen@kapsi.fi>
To: swarren@wwwdotorg.org, thierry.reding@gmail.com,
gnurou@gmail.com, pdeschrijver@nvidia.com, rjw@rjwysocki.net,
viresh.kumar@linaro.org
Cc: pgaikwad@nvidia.com, mturquette@linaro.org, vinceh@nvidia.com,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
tuomas.tynkkynen@iki.fi,
Mikko Perttunen <mikko.perttunen@kapsi.fi>,
Tuomas Tynkkynen <ttynkkynen@nvidia.com>,
pwalmsley@nvidia.com, linux-tegra@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 06/18] clk: tegra: Add DFLL DVCO reset control for Tegra124
Date: Sun, 1 Mar 2015 14:44:29 +0200 [thread overview]
Message-ID: <1425213881-5262-7-git-send-email-mikko.perttunen@kapsi.fi> (raw)
In-Reply-To: <1425213881-5262-1-git-send-email-mikko.perttunen@kapsi.fi>
From: Paul Walmsley <pwalmsley@nvidia.com>
The DVCO present in the DFLL IP block has a separate reset line,
exposed via the CAR IP block. This reset line is asserted upon SoC
reset. Unless something (such as the DFLL driver) deasserts this
line, the DVCO will not oscillate, although reads and writes to the
DFLL IP block will complete.
Thanks to Aleksandr Frid <afrid@nvidia.com> for identifying this and
saving hours of debugging time.
Signed-off-by: Paul Walmsley <pwalmsley@nvidia.com>
[ttynkkynen: ported to tegra124 from tegra114]
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
[mikko.perttunen: ported to special reset callback]
Signed-off-by: Mikko Perttunen <mikko.perttunen@kapsi.fi>
---
v8:
- Changed to use SoC-specific reset system
drivers/clk/tegra/clk-tegra124.c | 68 ++++++++++++++++++++++++++++++++
include/dt-bindings/reset/tegra124-car.h | 11 ++++++
2 files changed, 79 insertions(+)
create mode 100644 include/dt-bindings/reset/tegra124-car.h
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index 9a893f2..6c96daf 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -24,6 +24,7 @@
#include <linux/export.h>
#include <linux/clk/tegra.h>
#include <dt-bindings/clock/tegra124-car.h>
+#include <dt-bindings/reset/tegra124-car.h>
#include "clk.h"
#include "clk-id.h"
@@ -39,6 +40,9 @@
#define CLK_SOURCE_CSITE 0x1d4
#define CLK_SOURCE_EMC 0x19c
+#define RST_DFLL_DVCO 0x2f4
+#define DVFS_DFLL_RESET_SHIFT 0
+
#define PLLC_BASE 0x80
#define PLLC_OUT 0x84
#define PLLC_MISC2 0x88
@@ -1421,6 +1425,68 @@ static void __init tegra124_clock_apply_init_table(void)
}
/**
+ * tegra124_car_barrier - wait for pending writes to the CAR to complete
+ *
+ * Wait for any outstanding writes to the CAR MMIO space from this CPU
+ * to complete before continuing execution. No return value.
+ */
+static void tegra124_car_barrier(void)
+{
+ readl_relaxed(clk_base + RST_DFLL_DVCO);
+}
+
+/**
+ * tegra124_clock_assert_dfll_dvco_reset - assert the DFLL's DVCO reset
+ *
+ * Assert the reset line of the DFLL's DVCO. No return value.
+ */
+void tegra124_clock_assert_dfll_dvco_reset(void)
+{
+ u32 v;
+
+ v = readl_relaxed(clk_base + RST_DFLL_DVCO);
+ v |= (1 << DVFS_DFLL_RESET_SHIFT);
+ writel_relaxed(v, clk_base + RST_DFLL_DVCO);
+ tegra124_car_barrier();
+}
+
+/**
+ * tegra124_clock_deassert_dfll_dvco_reset - deassert the DFLL's DVCO reset
+ *
+ * Deassert the reset line of the DFLL's DVCO, allowing the DVCO to
+ * operate. No return value.
+ */
+void tegra124_clock_deassert_dfll_dvco_reset(void)
+{
+ u32 v;
+
+ v = readl_relaxed(clk_base + RST_DFLL_DVCO);
+ v &= ~(1 << DVFS_DFLL_RESET_SHIFT);
+ writel_relaxed(v, clk_base + RST_DFLL_DVCO);
+ tegra124_car_barrier();
+}
+
+int tegra124_reset_assert(unsigned long id)
+{
+ if (id == TEGRA124_RST_DFLL_DVCO)
+ tegra124_clock_assert_dfll_dvco_reset();
+ else
+ return -EINVAL;
+
+ return 0;
+}
+
+int tegra124_reset_deassert(unsigned long id)
+{
+ if (id == TEGRA124_RST_DFLL_DVCO)
+ tegra124_clock_deassert_dfll_dvco_reset();
+ else
+ return -EINVAL;
+
+ return 0;
+}
+
+/**
* tegra132_clock_apply_init_table - initialize clocks on Tegra132 SoCs
*
* Program an initial clock rate and enable or disable clocks needed
@@ -1504,6 +1570,8 @@ static void __init tegra124_132_clock_init_post(struct device_node *np)
{
tegra_super_clk_gen4_init(clk_base, pmc_base, tegra124_clks,
&pll_x_params);
+ tegra_init_special_resets(tegra124_reset_assert,
+ tegra124_reset_deassert);
tegra_add_of_provider(np);
tegra_register_devclks(devclks, ARRAY_SIZE(devclks));
diff --git a/include/dt-bindings/reset/tegra124-car.h b/include/dt-bindings/reset/tegra124-car.h
new file mode 100644
index 0000000..1cc771f
--- /dev/null
+++ b/include/dt-bindings/reset/tegra124-car.h
@@ -0,0 +1,11 @@
+/*
+ * This header provides Tegra124-specific constants for binding
+ * nvidia,tegra124-car.
+ */
+
+#ifndef _DT_BINDINGS_RESET_TEGRA124_CAR_H
+#define _DT_BINDINGS_RESET_TEGRA124_CAR_H
+
+#define TEGRA124_RST_DFLL_DVCO 0x40000000
+
+#endif /* _DT_BINDINGS_RESET_TEGRA124_CAR_H */
--
2.3.0
next prev parent reply other threads:[~2015-03-01 12:44 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-01 12:44 [PATCH v8 00/18] Tegra124 CL-DVFS / DFLL clocksource + cpufreq Mikko Perttunen
2015-03-01 12:44 ` [PATCH v8 02/18] clk: tegra: Add library for the DFLL clock source (open-loop mode) Mikko Perttunen
2015-03-01 12:44 ` [PATCH v8 04/18] clk: tegra: Add functions for parsing CVB tables Mikko Perttunen
2015-03-01 12:44 ` Mikko Perttunen [this message]
2015-03-01 12:44 ` [PATCH v8 08/18] clk: tegra: Save/restore CCLKG_BURST_POLICY on suspend Mikko Perttunen
2015-03-01 12:44 ` [PATCH v8 09/18] clk: tegra: Add the DFLL as a possible parent of the cclk_g clock Mikko Perttunen
2015-03-01 12:44 ` [PATCH v8 10/18] clk: tegra: Initialize PLL_X before CCLK_G to ensure it has a parent Mikko Perttunen
2015-04-10 21:08 ` Michael Turquette
2015-04-11 11:00 ` Mikko Perttunen
2015-04-13 12:17 ` Tomeu Vizoso
[not found] ` <CAAObsKCHUG7Auwu29My5xfynsQ1Jm6KB0bGxf1e3uUO6dvsBRA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-04-13 19:31 ` Michael Turquette
2015-04-13 19:35 ` Mikko Perttunen
[not found] ` <1425213881-5262-1-git-send-email-mikko.perttunen-/1wQRMveznE@public.gmane.org>
2015-03-01 12:44 ` [PATCH v8 01/18] clk: tegra: Add binding for the Tegra124 DFLL clocksource Mikko Perttunen
2015-03-01 12:44 ` [PATCH v8 03/18] clk: tegra: Add closed loop support for the DFLL Mikko Perttunen
2015-03-01 12:44 ` [PATCH v8 05/18] clk: tegra: Introduce ability for SoC-specific reset control callbacks Mikko Perttunen
2015-03-01 12:44 ` [PATCH v8 07/18] clk: tegra: Add Tegra124 DFLL clocksource platform driver Mikko Perttunen
2015-03-01 12:44 ` [PATCH v8 11/18] ARM: tegra: Add the DFLL to Tegra124 device tree Mikko Perttunen
2015-03-01 12:44 ` [PATCH v8 16/18] ARM: tegra: Add entries for cpufreq on Tegra124 Mikko Perttunen
2015-03-01 12:44 ` [PATCH v8 12/18] ARM: tegra: Enable the DFLL on the Jetson TK1 Mikko Perttunen
2015-03-01 12:44 ` [PATCH v8 13/18] cpufreq: tegra124: Add device tree bindings Mikko Perttunen
2015-03-01 12:44 ` [PATCH v8 14/18] cpufreq: tegra: Rename tegra-cpufreq to tegra20-cpufreq Mikko Perttunen
2015-03-01 12:44 ` [PATCH v8 15/18] cpufreq: Add cpufreq driver for Tegra124 Mikko Perttunen
2015-03-02 8:49 ` Paul Bolle
2015-03-03 11:33 ` Mikko Perttunen
2015-03-04 7:11 ` Tuomas Tynkkynen
2015-03-05 10:15 ` Mikko Perttunen
2015-03-01 12:44 ` [PATCH v8 17/18] ARM: tegra: Add CPU regulator to the Jetson TK1 device tree Mikko Perttunen
2015-03-01 12:44 ` [PATCH v8 18/18] ARM: tegra: enable Tegra124 cpufreq driver by default Mikko Perttunen
2015-03-11 10:07 ` [PATCH v8 00/18] Tegra124 CL-DVFS / DFLL clocksource + cpufreq Thierry Reding
2015-04-10 21:11 ` Michael Turquette
2015-04-14 11:25 ` Mikko Perttunen
2015-04-14 17:21 ` Boris Brezillon
2015-04-14 19:40 ` Mikko Perttunen
2015-04-14 21:06 ` Michael Turquette
2015-04-14 21:10 ` Mikko Perttunen
2015-04-14 14:43 ` Thierry Reding
2015-04-14 21:09 ` Michael Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425213881-5262-7-git-send-email-mikko.perttunen@kapsi.fi \
--to=mikko.perttunen@kapsi.fi \
--cc=gnurou@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=pdeschrijver@nvidia.com \
--cc=pgaikwad@nvidia.com \
--cc=pwalmsley@nvidia.com \
--cc=rjw@rjwysocki.net \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
--cc=ttynkkynen@nvidia.com \
--cc=tuomas.tynkkynen@iki.fi \
--cc=vinceh@nvidia.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).