linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Cc: sboyd@codeaurora.org, srinivas.kandagatla@linaro.org,
	nrajan@codeaurora.org, lina.iyer@linaro.org,
	Rajendra Nayak <rnayak@codeaurora.org>
Subject: [RFC 0/7] qcom: Add support for tsens driver
Date: Thu, 23 Apr 2015 19:16:06 +0530	[thread overview]
Message-ID: <1429796773-7151-1-git-send-email-rnayak@codeaurora.org> (raw)

This is an attempt to have a single tsens driver for
the different versions of the tsens IP that exist, on
different qcom msm/apq SoCs.
Support is added for msm8916, msm8960 and msm8974 families.
Based on top of the latest eeprom framework patches [1]

A lot of the work is based of original code from Stephen Boyd
and Siddartha Mohanadoss. I have also picked some of what
Narendran Rajan did in his attempt to upstream the support
for 8960 family. I could not keep the original authorship on
any of the patches because I ended up moving the code around
quite a bit in an effort to have a single driver for the
various devices. I would be glad to change the authorship
for any of the patches if needed.

[1] https://lwn.net/Articles/638565/

Rajendra Nayak (6):
  thermal: qcom: tsens: Add a skeletal tsens drivers
  thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
  thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
  thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
  arm: dts: msm8974: Add thermal zones, tsens and eeprom nodes
  arm: dts: apq8064: Add thermal zones, tsens and eeprom nodes

Srinivas Kandagatla (1):
  clk: qcom: gcc-msm8960: add child devices support.

 .../devicetree/bindings/thermal/qcom-tsens.txt     |  36 +++
 arch/arm/boot/dts/qcom-apq8064.dtsi                | 108 +++++++
 arch/arm/boot/dts/qcom-msm8974.dtsi                | 105 +++++++
 drivers/clk/qcom/gcc-msm8960.c                     |   4 +-
 drivers/thermal/Kconfig                            |   5 +
 drivers/thermal/Makefile                           |   1 +
 drivers/thermal/qcom/Kconfig                       |  10 +
 drivers/thermal/qcom/Makefile                      |   2 +
 drivers/thermal/qcom/tsens-8916.c                  | 107 +++++++
 drivers/thermal/qcom/tsens-8960.c                  | 336 +++++++++++++++++++++
 drivers/thermal/qcom/tsens-8974.c                  | 239 +++++++++++++++
 drivers/thermal/qcom/tsens-common.c                | 128 ++++++++
 drivers/thermal/qcom/tsens.c                       | 209 +++++++++++++
 drivers/thermal/qcom/tsens.h                       |  69 +++++
 14 files changed, 1358 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
 create mode 100644 drivers/thermal/qcom/Kconfig
 create mode 100644 drivers/thermal/qcom/Makefile
 create mode 100644 drivers/thermal/qcom/tsens-8916.c
 create mode 100644 drivers/thermal/qcom/tsens-8960.c
 create mode 100644 drivers/thermal/qcom/tsens-8974.c
 create mode 100644 drivers/thermal/qcom/tsens-common.c
 create mode 100644 drivers/thermal/qcom/tsens.c
 create mode 100644 drivers/thermal/qcom/tsens.h

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


             reply	other threads:[~2015-04-23 13:51 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-23 13:46 Rajendra Nayak [this message]
2015-04-23 13:46 ` [RFC 1/7] thermal: qcom: tsens: Add a skeletal tsens drivers Rajendra Nayak
2015-06-05 23:49   ` Kevin Hilman
2015-06-08  4:02     ` Rajendra Nayak
2015-06-12 16:03   ` Lina Iyer
2015-06-15  3:01     ` Rajendra Nayak
2015-04-23 13:46 ` [RFC 2/7] thermal: qcom: tsens-8916: Add support for 8916 family of SoCs Rajendra Nayak
2015-04-23 13:46 ` [RFC 3/7] thermal: qcom: tsens-8974: Add support for 8974 " Rajendra Nayak
2015-04-23 13:46 ` [RFC 4/7] thermal: qcom: tsens-8960: Add support for 8960 " Rajendra Nayak
2015-04-23 13:46 ` [RFC 5/7] arm: dts: msm8974: Add thermal zones, tsens and eeprom nodes Rajendra Nayak
2015-04-23 16:51   ` Lina Iyer
2015-04-24  2:49     ` Rajendra Nayak
2015-04-23 13:46 ` [RFC 6/7] clk: qcom: gcc-msm8960: add child devices support Rajendra Nayak
2015-04-23 13:46 ` [RFC 7/7] arm: dts: apq8064: Add thermal zones, tsens and eeprom nodes Rajendra Nayak
2015-04-23 16:52 ` [RFC 0/7] qcom: Add support for tsens driver Lina Iyer
2015-06-06  0:25 ` Kevin Hilman
2015-06-08  4:29   ` Rajendra Nayak
2015-06-08 16:05     ` Kevin Hilman
2015-06-09  5:15       ` Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1429796773-7151-1-git-send-email-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=lina.iyer@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=nrajan@codeaurora.org \
    --cc=sboyd@codeaurora.org \
    --cc=srinivas.kandagatla@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).