[RFC 5/7] arm: dts: msm8974: Add thermal zones, tsens and eeprom nodes

[Rajendra Nayak <rnayak@codeaurora.org>]

Add thermal zones, tsens and eeprom nodes

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 105 ++++++++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index e265ec1..5716e89 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -57,6 +57,88 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip@0 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip@1 {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip@0 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip@1 {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip@0 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip@1 {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip@0 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip@1 {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 7 0xf04>;
@@ -85,6 +167,29 @@
 			      <0xf9002000 0x1000>;
 		};
 
+		qfprom: qfprom@fc4bc000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			tsens_calib: calib@d0 {
+				reg = <0xd0 0x18>;
+			};
+			tsens_backup: backup@440 {
+				reg = <0x440 0x10>;
+			};
+		};
+
+		tsens: thermal-sensor@fc4a8000 {
+			compatible = "qcom,msm8974-tsens";
+			reg = <0xfc4a8000 0x2000>;
+			calib = <&tsens_calib>;
+			calib_backup = <&tsens_backup>;
+			qcom,tsens-slopes = <3200 3200 3200 3200 3200 3200
+				3200 3200 3200 3200 3200>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation