From: Rajendra Nayak <rnayak@codeaurora.org>
To: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Cc: sboyd@codeaurora.org, srinivas.kandagatla@linaro.org,
nrajan@codeaurora.org, lina.iyer@linaro.org,
Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH 0/9] qcom: Add support for TSENS driver
Date: Wed, 8 Jul 2015 15:17:09 +0530 [thread overview]
Message-ID: <1436348838-22671-1-git-send-email-rnayak@codeaurora.org> (raw)
Changes since RFC:
* Added support for 8916 and 8084
* Based off the latest nvmem framework patches [1]
* Minor review fixes for comments mostly from Lina
** I have also added irq support using the hardware
trip point support series [2]. Will post that
out seperately.
This is an attempt to have a single TSENS driver for
the different versions of the TSENS IP that exist, on
different qcom msm/apq SoCs'
Support is added for msm8916, msm8960 and msm8974 families.
Based on top of the latest nvmem framework patches [2]
A lot of the work is based of original code from Stephen Boyd
and Siddartha Mohanadoss. I have also picked some of what
Narendran Rajan did in his attempt to upstream the support
for 8960 family. I could not keep the original authorship on
any of the patches because I ended up moving the code around
quite a bit in an effort to have a single driver for the
various devices. I would be glad to change the authorship
for any of the patches if needed.
[1] https://lkml.org/lkml/2015/6/22/609
[2] https://lkml.org/lkml/2015/5/20/472
Rajendra Nayak (8):
thermal: qcom: tsens: Add a skeletal TSENS drivers
thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
arm: dts: msm8974: Add thermal zones, tsens and eeprom nodes
arm: dts: apq8064: Add thermal zones, tsens and eeprom nodes
arm: dts: apq8084: Add thermal zones, tsens and eeprom nodes
arm64: dts: msm8916: Add thermal zones, tsens and eeprom nodes
Srinivas Kandagatla (1):
clk: qcom: gcc-msm8960: add child devices support.
.../devicetree/bindings/thermal/qcom-tsens.txt | 37 +++
arch/arm/boot/dts/qcom-apq8064.dtsi | 108 ++++++++
arch/arm/boot/dts/qcom-apq8084.dtsi | 105 ++++++++
arch/arm/boot/dts/qcom-msm8974.dtsi | 105 ++++++++
arch/arm64/boot/dts/qcom/msm8916.dtsi | 66 +++++
drivers/clk/qcom/gcc-msm8960.c | 4 +-
drivers/thermal/Kconfig | 5 +
drivers/thermal/Makefile | 1 +
drivers/thermal/qcom/Kconfig | 10 +
drivers/thermal/qcom/Makefile | 2 +
drivers/thermal/qcom/tsens-8916.c | 107 ++++++++
drivers/thermal/qcom/tsens-8960.c | 291 +++++++++++++++++++++
drivers/thermal/qcom/tsens-8974.c | 239 +++++++++++++++++
drivers/thermal/qcom/tsens-common.c | 128 +++++++++
drivers/thermal/qcom/tsens.c | 209 +++++++++++++++
drivers/thermal/qcom/tsens.h | 69 +++++
16 files changed, 1485 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
create mode 100644 drivers/thermal/qcom/Kconfig
create mode 100644 drivers/thermal/qcom/Makefile
create mode 100644 drivers/thermal/qcom/tsens-8916.c
create mode 100644 drivers/thermal/qcom/tsens-8960.c
create mode 100644 drivers/thermal/qcom/tsens-8974.c
create mode 100644 drivers/thermal/qcom/tsens-common.c
create mode 100644 drivers/thermal/qcom/tsens.c
create mode 100644 drivers/thermal/qcom/tsens.h
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next reply other threads:[~2015-07-08 9:47 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-08 9:47 Rajendra Nayak [this message]
2015-07-08 9:47 ` [PATCH 1/9] thermal: qcom: tsens: Add a skeletal TSENS drivers Rajendra Nayak
2015-07-08 9:47 ` [PATCH 2/9] thermal: qcom: tsens-8916: Add support for 8916 family of SoCs Rajendra Nayak
2015-07-08 9:47 ` [PATCH 3/9] thermal: qcom: tsens-8974: Add support for 8974 " Rajendra Nayak
2015-07-08 9:47 ` [PATCH 4/9] thermal: qcom: tsens-8960: Add support for 8960 " Rajendra Nayak
2015-07-08 9:47 ` [PATCH 5/9] clk: qcom: gcc-msm8960: add child devices support Rajendra Nayak
2015-08-11 22:49 ` Stephen Boyd
2015-08-12 9:00 ` Srinivas Kandagatla
2015-08-13 4:28 ` Rajendra Nayak
2015-08-14 0:42 ` Stephen Boyd
2015-08-14 3:09 ` Rajendra Nayak
2015-09-02 2:37 ` Rajendra Nayak
2015-09-03 17:27 ` Stephen Boyd
2015-09-07 6:39 ` Rajendra Nayak
2015-09-08 19:21 ` Stephen Boyd
2015-09-09 3:33 ` Rajendra Nayak
2015-09-09 5:15 ` Rajendra Nayak
2015-09-09 9:11 ` Srinivas Kandagatla
2015-08-12 20:18 ` Bjorn Andersson
2015-08-12 21:57 ` Stephen Boyd
2015-08-13 4:14 ` Bjorn Andersson
2015-08-14 0:46 ` Stephen Boyd
2015-07-08 9:47 ` [PATCH 6/9] arm: dts: msm8974: Add thermal zones, tsens and eeprom nodes Rajendra Nayak
2015-07-08 9:47 ` [PATCH 7/9] arm: dts: apq8064: " Rajendra Nayak
2015-07-08 9:47 ` [PATCH 8/9] arm: dts: apq8084: " Rajendra Nayak
2015-07-08 9:47 ` [PATCH 9/9] arm64: dts: msm8916: " Rajendra Nayak
2015-08-11 8:26 ` [PATCH 0/9] qcom: Add support for TSENS driver Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436348838-22671-1-git-send-email-rnayak@codeaurora.org \
--to=rnayak@codeaurora.org \
--cc=lina.iyer@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=nrajan@codeaurora.org \
--cc=sboyd@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).