From: Sascha Hauer <s.hauer@pengutronix.de>
To: linux-pm@vger.kernel.org, Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <edubezval@gmail.com>
Cc: linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>
Subject: [PATCH v2] Add Mediatek thermal support
Date: Tue, 21 Jul 2015 09:59:23 +0200 [thread overview]
Message-ID: <1437465566-16299-1-git-send-email-s.hauer@pengutronix.de> (raw)
This series adds support for the thermal sensors included in the
MT8173 SoC. Currently only basic temperature reading is supported
without any interrupt support.
The cpufreq driver for MT8173 is currently under review, so there's no
real cooling device available in mainline. Until this is available the
thermal driver can be tested with the following dts snippet. It creates
a fake gpio fan and a fake trip point which is so low that it can easily
be reached with a "cat /dev/zero > /dev/null" on the command line.
Please review and let me know what's missing to be included in mainline.
Changes since v1:
- Use "mediatek," prefix for custom properties
- Drop "thermal: consistently use int for temperatures" dependency
Sascha
fan: gpio_fan {
compatible = "gpio-fan";
gpios = <&pio 24 0>;
gpio-fan,speed-map = <0 0
4500 1>;
#cooling-cells = <2>;
};
thermal-zones {
cpu_thermal: cpu_thermal {
polling-delay-passive = <1000>; /* milliseconds */
polling-delay = <1000>; /* milliseconds */
thermal-sensors = <&thermal 0>;
trips {
cpu_passive: cpu_passive {
temperature = <47000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_crit {
temperature = <90000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_passive>;
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
----------------------------------------------------------------
Sascha Hauer (3):
dt-bindings: thermal: Add binding document for Mediatek thermal controller
thermal: Add Mediatek thermal controller support
ARM64: dts: mt8173: Add thermal/auxadc device nodes
.../bindings/thermal/mediatek-thermal.txt | 38 ++
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 18 +
drivers/thermal/Kconfig | 8 +
drivers/thermal/Makefile | 1 +
drivers/thermal/mtk_thermal.c | 602 +++++++++++++++++++++
5 files changed, 667 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
create mode 100644 drivers/thermal/mtk_thermal.c
next reply other threads:[~2015-07-21 7:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-21 7:59 Sascha Hauer [this message]
2015-07-21 7:59 ` [PATCH 1/3] dt-bindings: thermal: Add binding document for Mediatek thermal controller Sascha Hauer
2015-07-21 7:59 ` [PATCH 2/3] thermal: Add Mediatek thermal controller support Sascha Hauer
2015-07-21 15:13 ` Daniel Kurtz
2015-08-05 10:20 ` Sascha Hauer
2015-07-21 7:59 ` [PATCH 3/3] ARM64: dts: mt8173: Add thermal/auxadc device nodes Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437465566-16299-1-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=edubezval@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).