linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Andrew F. Davis" <afd@ti.com>
To: "Pali Rohár" <pali.rohar@gmail.com>,
	"Sebastian Reichel" <sre@kernel.org>,
	"Dmitry Eremin-Solenikov" <dbaryshkov@gmail.com>,
	"David Woodhouse" <dwmw2@infradead.org>,
	"Dan Murphy" <dmurphy@ti.com>
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Andrew F. Davis" <afd@ti.com>
Subject: [PATCH 2/8] power: bq27x00_battery: Fix lines over 80 characters long
Date: Wed, 22 Jul 2015 16:51:54 -0500	[thread overview]
Message-ID: <1437601920-13045-3-git-send-email-afd@ti.com> (raw)
In-Reply-To: <1437601920-13045-1-git-send-email-afd@ti.com>

Shorted lines over 80 characters long by reducing tab count.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 drivers/power/bq27x00_battery.c | 74 ++++++++++++++++++++---------------------
 1 file changed, 37 insertions(+), 37 deletions(-)

diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index 2257bd4..203cf61 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -39,49 +39,49 @@
 
 #include <linux/power/bq27x00_battery.h>
 
-#define DRIVER_VERSION			"1.2.0"
+#define DRIVER_VERSION		"1.2.0"
 
 #define BQ27XXX_MANUFACTURER	"Texas Instruments"
 
-#define BQ27x00_REG_TEMP		0x06
-#define BQ27x00_REG_VOLT		0x08
-#define BQ27x00_REG_AI			0x14
-#define BQ27x00_REG_FLAGS		0x0A
-#define BQ27x00_REG_TTE			0x16
-#define BQ27x00_REG_TTF			0x18
-#define BQ27x00_REG_TTECP		0x26
-#define BQ27x00_REG_NAC			0x0C /* Nominal available capacity */
-#define BQ27x00_REG_LMD			0x12 /* Last measured discharge */
-#define BQ27x00_REG_CYCT		0x2A /* Cycle count total */
-#define BQ27x00_REG_AE			0x22 /* Available energy */
-#define BQ27x00_POWER_AVG		0x24
-
-#define BQ27000_REG_RSOC		0x0B /* Relative State-of-Charge */
-#define BQ27000_REG_ILMD		0x76 /* Initial last measured discharge */
-#define BQ27000_FLAG_EDVF		BIT(0) /* Final End-of-Discharge-Voltage flag */
-#define BQ27000_FLAG_EDV1		BIT(1) /* First End-of-Discharge-Voltage flag */
-#define BQ27000_FLAG_CI			BIT(4) /* Capacity Inaccurate flag */
-#define BQ27000_FLAG_FC			BIT(5)
-#define BQ27000_FLAG_CHGS		BIT(7) /* Charge state flag */
-
-#define BQ27500_REG_SOC			0x2C
-#define BQ27500_REG_DCAP		0x3C /* Design capacity */
-#define BQ27500_FLAG_DSC		BIT(0)
-#define BQ27500_FLAG_SOCF		BIT(1) /* State-of-Charge threshold final */
-#define BQ27500_FLAG_SOC1		BIT(2) /* State-of-Charge threshold 1 */
-#define BQ27500_FLAG_FC			BIT(9)
-#define BQ27500_FLAG_OTC		BIT(15)
-
-#define BQ27742_POWER_AVG		0x76
-
-#define BQ27510_REG_SOC			0x20
-#define BQ27510_REG_DCAP		0x2E /* Design capacity */
-#define BQ27510_REG_CYCT		0x1E /* Cycle count total */
+#define BQ27x00_REG_TEMP	0x06
+#define BQ27x00_REG_VOLT	0x08
+#define BQ27x00_REG_AI		0x14
+#define BQ27x00_REG_FLAGS	0x0A
+#define BQ27x00_REG_TTE		0x16
+#define BQ27x00_REG_TTF		0x18
+#define BQ27x00_REG_TTECP	0x26
+#define BQ27x00_REG_NAC		0x0C /* Nominal available capacity */
+#define BQ27x00_REG_LMD		0x12 /* Last measured discharge */
+#define BQ27x00_REG_CYCT	0x2A /* Cycle count total */
+#define BQ27x00_REG_AE		0x22 /* Available energy */
+#define BQ27x00_POWER_AVG	0x24
+
+#define BQ27000_REG_RSOC	0x0B /* Relative State-of-Charge */
+#define BQ27000_REG_ILMD	0x76 /* Initial last measured discharge */
+#define BQ27000_FLAG_EDVF	BIT(0) /* Final End-of-Discharge-Voltage flag */
+#define BQ27000_FLAG_EDV1	BIT(1) /* First End-of-Discharge-Voltage flag */
+#define BQ27000_FLAG_CI		BIT(4) /* Capacity Inaccurate flag */
+#define BQ27000_FLAG_FC		BIT(5)
+#define BQ27000_FLAG_CHGS	BIT(7) /* Charge state flag */
+
+#define BQ27500_REG_SOC		0x2C
+#define BQ27500_REG_DCAP	0x3C /* Design capacity */
+#define BQ27500_FLAG_DSC	BIT(0)
+#define BQ27500_FLAG_SOCF	BIT(1) /* State-of-Charge threshold final */
+#define BQ27500_FLAG_SOC1	BIT(2) /* State-of-Charge threshold 1 */
+#define BQ27500_FLAG_FC		BIT(9)
+#define BQ27500_FLAG_OTC	BIT(15)
+
+#define BQ27742_POWER_AVG	0x76
+
+#define BQ27510_REG_SOC		0x20
+#define BQ27510_REG_DCAP	0x2E /* Design capacity */
+#define BQ27510_REG_CYCT	0x1E /* Cycle count total */
 
 /* bq27425 register addresses are same as bq27x00 addresses minus 4 */
-#define BQ27425_REG_OFFSET		0x04
+#define BQ27425_REG_OFFSET	0x04
 #define BQ27425_REG_SOC		(0x1C + BQ27425_REG_OFFSET)
-#define BQ27425_REG_DCAP		(0x3C + BQ27425_REG_OFFSET)
+#define BQ27425_REG_DCAP	(0x3C + BQ27425_REG_OFFSET)
 
 #define BQ27000_RS			20 /* Resistor sense */
 #define BQ27x00_POWER_CONSTANT		(256 * 29200 / 1000)
-- 
1.9.1

  parent reply	other threads:[~2015-07-22 21:51 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-22 21:51 [PATCH 0/8] Add support for additional bq27xxx devices Andrew F. Davis
2015-07-22 21:51 ` [PATCH 1/8] power: bq27x00_battery: Add manufacturer property Andrew F. Davis
2015-07-23 15:55   ` Dan Murphy
2015-07-23 15:59   ` Pali Rohár
2015-07-24 15:36   ` Sebastian Reichel
2015-07-22 21:51 ` Andrew F. Davis [this message]
2015-07-23 16:00   ` [PATCH 2/8] power: bq27x00_battery: Fix lines over 80 characters long Pali Rohár
2015-07-23 16:02   ` Dan Murphy
2015-07-24 15:36   ` Sebastian Reichel
2015-07-22 21:51 ` [PATCH 3/8] power: bq27x00_battery: Fix function parameter alignment Andrew F. Davis
2015-07-23 16:00   ` Pali Rohár
2015-07-23 16:02   ` Dan Murphy
2015-07-24 15:37   ` Sebastian Reichel
2015-07-22 21:51 ` [PATCH 4/8] power: bq27x00_battery: Checkpatch fixes Andrew F. Davis
2015-07-23 16:01   ` Pali Rohár
2015-07-23 16:04   ` Dan Murphy
2015-07-24 15:37   ` Sebastian Reichel
2015-07-22 21:51 ` [PATCH 5/8] power: bq27x00_battery: Renaming for consistency Andrew F. Davis
2015-07-23 16:12   ` Pali Rohár
     [not found]     ` <55B11E4C.6000006@ti.com>
2015-07-23 20:15       ` Pali Rohár
2015-07-23 20:56         ` Belisko Marek
2015-07-23 21:15           ` Pali Rohár
2015-07-23 21:36             ` Belisko Marek
2015-07-24  7:44               ` Pali Rohár
2015-07-22 21:51 ` [PATCH 6/8] power: bq27xxx_battery: Fix typos and change naming for state of charge functions Andrew F. Davis
2015-07-23 16:15   ` Pali Rohár
2015-07-23 17:19     ` Andrew F. Davis
2015-07-28  8:41       ` Pali Rohár
2015-07-22 21:51 ` [PATCH 7/8] power: bq27xxx_battery: Add support for additional bq27xxx family devices Andrew F. Davis
2015-07-23 16:20   ` Pali Rohár
2015-07-23 17:42     ` Andrew F. Davis
2015-07-28  8:43       ` Pali Rohár
2015-07-22 21:52 ` [PATCH 8/8] power: bq27xxx_battery: Cleanup health checking Andrew F. Davis
2015-07-23 16:22   ` Pali Rohár
2015-07-23 17:06     ` Joe Perches
2015-07-24 20:32       ` Andrew F. Davis
2015-07-24 20:27     ` Andrew F. Davis
2015-07-24 20:53       ` Pali Rohár
2015-07-23 16:27 ` [PATCH 0/8] Add support for additional bq27xxx devices Pali Rohár
2015-07-23 17:01   ` Andreas Dannenberg
2015-07-24 15:57   ` Andrew F. Davis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1437601920-13045-3-git-send-email-afd@ti.com \
    --to=afd@ti.com \
    --cc=dbaryshkov@gmail.com \
    --cc=dmurphy@ti.com \
    --cc=dwmw2@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=pali.rohar@gmail.com \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).