From mboxrd@z Thu Jan 1 00:00:00 1970 From: Srinivas Pandruvada Subject: [RFC PATCH 2/3] cpufreq: user_guide: update for base_frequency Date: Fri, 4 Sep 2015 10:19:18 -0700 Message-ID: <1441387159-19860-2-git-send-email-srinivas.pandruvada@linux.intel.com> References: <1441387159-19860-1-git-send-email-srinivas.pandruvada@linux.intel.com> Return-path: Received: from mga11.intel.com ([192.55.52.93]:51149 "EHLO mga11.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933048AbbIDRTi (ORCPT ); Fri, 4 Sep 2015 13:19:38 -0400 In-Reply-To: <1441387159-19860-1-git-send-email-srinivas.pandruvada@linux.intel.com> Sender: linux-pm-owner@vger.kernel.org List-Id: linux-pm@vger.kernel.org To: rafael.j.wysocki@intel.com, viresh.kumar@linaro.org Cc: linux-pm@vger.kernel.org, Srinivas Pandruvada Updated documentation for cpufreq attributes. Signed-off-by: Srinivas Pandruvada --- Documentation/cpu-freq/user-guide.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt index 109e97b..0326a8c 100644 --- a/Documentation/cpu-freq/user-guide.txt +++ b/Documentation/cpu-freq/user-guide.txt @@ -212,6 +212,10 @@ bios_limit : If the BIOS tells the OS to limit a CPU to which can be detected through the generic thermal driver. +base_frequency : This shows base frequency of the cpu. Any + request above this is purely opportunistic, if + boost mode is enabled. + If you have selected the "userspace" governor which allows you to set the CPU operating frequency to a specific value, you can read out the current frequency in -- 2.4.3