From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rajendra Nayak Subject: [PATCH v2 9/9] arm64: dts: msm8916: Add thermal zones, tsens and qfprom nodes Date: Wed, 16 Sep 2015 11:53:23 +0530 Message-ID: <1442384603-26053-10-git-send-email-rnayak@codeaurora.org> References: <1442384603-26053-1-git-send-email-rnayak@codeaurora.org> Return-path: Received: from smtp.codeaurora.org ([198.145.29.96]:59803 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752200AbbIPGZk (ORCPT ); Wed, 16 Sep 2015 02:25:40 -0400 In-Reply-To: <1442384603-26053-1-git-send-email-rnayak@codeaurora.org> Sender: linux-pm-owner@vger.kernel.org List-Id: linux-pm@vger.kernel.org To: linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org, rui.zhang@intel.com, edubezval@gmail.com Cc: sboyd@codeaurora.org, srinivas.kandagatla@linaro.org, nrajan@codeaurora.org, lina.iyer@linaro.org, Rajendra Nayak Add thermal zones, tsens and qfprom nodes Signed-off-by: Rajendra Nayak --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 66 +++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 3e7083c..63b5262 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -68,6 +68,49 @@ }; }; + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cpu_alert0: trip@0 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip@1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + cpu_alert1: trip@0 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip@1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + }; + timer { compatible = "arm,armv8-timer"; interrupts = , @@ -392,6 +435,29 @@ interrupt-controller; #interrupt-cells = <4>; }; + + qfprom: qfprom@5c000 { + compatible = "qcom,qfprom"; + reg = <0x5c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + tsens_caldata: caldata@d0 { + reg = <0xd0 0x8>; + }; + tsens_calsel: calsel@ec { + reg = <0xec 0x4>; + }; + }; + + tsens: thermal-sensor@4a8000 { + compatible = "qcom,msm8916-tsens"; + reg = <0x4a8000 0x2000>; + nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; + nvmem-cell-names = "calib", "calib_sel"; + qcom,tsens-slopes = <3200 3200 3200 3200 3200>; + qcom,sensor-id = <0 1 2 4 5>; + #thermal-sensor-cells = <1>; + }; }; }; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation