From: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org
Cc: MLongnecker-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org,
swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org,
mikko.perttunen-/1wQRMveznE@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH V8 00/14] Add T210 support in Tegra soctherm
Date: Wed, 16 Mar 2016 16:55:57 +0800 [thread overview]
Message-ID: <1458118571-29717-1-git-send-email-wni@nvidia.com> (raw)
This patchset adds following functions for tegra_soctherm driver:
1. add T210 support.
2. export debugfs to show some registers.
3. add thermtrip funciton.
4. add suspend/resume function.
The v7 series is in:
https://patchwork.kernel.org/patch/8561681/
The v6 series is in:
https://lkml.org/lkml/2016/2/22/66
The v5 series is in:
http://www.spinics.net/lists/linux-tegra/msg25079.html
The v4 series is in:
http://www.spinics.net/lists/linux-tegra/msg24972.html
The V3 series is in:
http://www.spinics.net/lists/linux-tegra/msg24911.html
The V2 series is in:
http://www.spinics.net/lists/linux-tegra/msg24901.html
The V1 series is in:
http://www.spinics.net/lists/linux-tegra/msg24808.html
Main changes from V7:
1. Split PM support patch into three smaller patches.
2. Few changes per Eduardo's comments.
Main changes from V6:
1. rebased patches on Eduardo's
[PATCH 00/13] thermal: convert users of thermal_zone_of_sensor_register to devm_
Main changes from V5:
1. Change to use linux thermal framework to implement
thermtrip funciton, per Rob's comment.
2. Add .set_trip_temp() in of-thermal driver, so that
we can set trips on hardware.
Main changes from V4:
1. Change description of devicetree binding per Rob's comment.
2. Call of_node_put to decrement refcount of the node.
Main changes from V3:
1. Change structures to "const" in chip specific files.
2. Minor changes per Thieery's comments.
Main changes from V2:
1. Fix build error in patch [1/11].
2. Use of_get_child_by_name instead of of_find_node_by_name in patch [8/11].
3. Use debugfs_remove_recursive to remove debugfs in patch [6/11].
Main changes from V1:
1. Use the new type to handl different Tegra chips in one driver, which suggested by Thierry.
2. Changes per Thieery's other comments.
Wei Ni (14):
thermal: tegra: move tegra thermal files into tegra directory
thermal: tegra: combine sensor group-related data
thermal: tegra: get rid of PDIV/HOTSPOT hack
thermal: tegra: split tegra_soctherm driver
thermal: tegra: add Tegra210 specific SOC_THERM driver
thermal: tegra: add a debugfs to show registers
thermal: of-thermal: allow setting trip_temp on hardware
of: add notes of critical trips for soctherm
thermal: tegra: add thermtrip function
thermal: tegra: handle clocks in one function
thermal: tegra: handle HW initialization in one funcotion
thermal: tegra: add PM support
arm64: tegra: add soctherm node for Tegra210
arm: tegra: set critical trips for Tegra124
.../devicetree/bindings/thermal/tegra-soctherm.txt | 12 +
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 18 +-
arch/arm/boot/dts/tegra124.dtsi | 48 ++
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 92 +++
drivers/thermal/Kconfig | 12 +-
drivers/thermal/Makefile | 2 +-
drivers/thermal/of-thermal.c | 8 +
drivers/thermal/tegra/Kconfig | 13 +
drivers/thermal/tegra/Makefile | 5 +
drivers/thermal/tegra/soctherm-fuse.c | 169 +++++
drivers/thermal/tegra/soctherm.c | 682 +++++++++++++++++++++
drivers/thermal/tegra/soctherm.h | 123 ++++
drivers/thermal/tegra/tegra124-soctherm.c | 196 ++++++
drivers/thermal/tegra/tegra210-soctherm.c | 197 ++++++
drivers/thermal/tegra_soctherm.c | 463 --------------
include/dt-bindings/thermal/tegra124-soctherm.h | 1 +
include/linux/thermal.h | 1 +
17 files changed, 1553 insertions(+), 489 deletions(-)
create mode 100644 drivers/thermal/tegra/Kconfig
create mode 100644 drivers/thermal/tegra/Makefile
create mode 100644 drivers/thermal/tegra/soctherm-fuse.c
create mode 100644 drivers/thermal/tegra/soctherm.c
create mode 100644 drivers/thermal/tegra/soctherm.h
create mode 100644 drivers/thermal/tegra/tegra124-soctherm.c
create mode 100644 drivers/thermal/tegra/tegra210-soctherm.c
delete mode 100644 drivers/thermal/tegra_soctherm.c
--
1.9.1
next reply other threads:[~2016-03-16 8:55 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-16 8:55 Wei Ni [this message]
2016-03-16 8:55 ` [PATCH V8 02/14] thermal: tegra: combine sensor group-related data Wei Ni
2016-03-16 8:56 ` [PATCH V8 03/14] thermal: tegra: get rid of PDIV/HOTSPOT hack Wei Ni
[not found] ` <1458118571-29717-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-03-16 8:55 ` [PATCH V8 01/14] thermal: tegra: move tegra thermal files into tegra directory Wei Ni
2016-03-16 8:56 ` [PATCH V8 04/14] thermal: tegra: split tegra_soctherm driver Wei Ni
2016-03-25 5:37 ` [PATCH V8 00/14] Add T210 support in Tegra soctherm Wei Ni
2016-03-28 13:38 ` Eduardo Valentin
[not found] ` <56F4CE8D.5020108-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-03-29 3:04 ` Eduardo Valentin
2016-03-29 3:29 ` Eduardo Valentin
[not found] ` <20160329032953.GA24089-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2016-03-29 4:22 ` Wei Ni
2016-03-29 4:57 ` Wei Ni
2016-03-29 10:19 ` Wei Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458118571-29717-1-git-send-email-wni@nvidia.com \
--to=wni-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=MLongnecker-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mikko.perttunen-/1wQRMveznE@public.gmane.org \
--cc=rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).