From: Wei Ni <wni@nvidia.com>
To: edubezval@gmail.com, rui.zhang@intel.com, thierry.reding@gmail.com
Cc: MLongnecker@nvidia.com, swarren@wwwdotorg.org,
mikko.perttunen@kapsi.fi, linux-tegra@vger.kernel.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
Wei Ni <wni@nvidia.com>
Subject: [PATCH V9 RESEND 12/14] thermal: tegra: add PM support
Date: Tue, 29 Mar 2016 18:29:22 +0800 [thread overview]
Message-ID: <1459247364-1139-13-git-send-email-wni@nvidia.com> (raw)
In-Reply-To: <1459247364-1139-1-git-send-email-wni@nvidia.com>
Add suspend/resume function in soctherm driver.
Signed-off-by: Wei Ni <wni@nvidia.com>
---
drivers/thermal/tegra/soctherm.c | 46 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index d2b7c255d71f..559c74279eb8 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -88,6 +88,7 @@ struct tegra_soctherm {
struct clk *clock_tsensor;
struct clk *clock_soctherm;
void __iomem *regs;
+ struct thermal_zone_device **thermctl_tzs;
u32 *calib;
struct tegra_soctherm_soc *soc;
@@ -566,6 +567,12 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
return err;
}
+ tegra->thermctl_tzs = devm_kzalloc(&pdev->dev,
+ sizeof(*z) * soc->num_ttgs,
+ GFP_KERNEL);
+ if (!tegra->thermctl_tzs)
+ return -ENOMEM;
+
err = soctherm_clk_enable(pdev, true);
if (err)
return err;
@@ -595,6 +602,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
}
zone->tz = z;
+ tegra->thermctl_tzs[soc->ttgs[i]->id] = z;
/* Configure hw trip points */
tegra_soctherm_set_hwtrips(&pdev->dev, soc->ttgs[i], z);
@@ -621,11 +629,49 @@ static int tegra_soctherm_remove(struct platform_device *pdev)
return 0;
}
+static int soctherm_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ soctherm_clk_enable(pdev, false);
+
+ return 0;
+}
+
+static int soctherm_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
+ struct tegra_soctherm_soc *soc = tegra->soc;
+ int err, i;
+
+ err = soctherm_clk_enable(pdev, true);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Resume failed: enable clocks failed\n");
+ return err;
+ }
+
+ soctherm_init(pdev);
+
+ for (i = 0; i < soc->num_ttgs; ++i) {
+ struct thermal_zone_device *tz;
+
+ tz = tegra->thermctl_tzs[soc->ttgs[i]->id];
+ tegra_soctherm_set_hwtrips(dev, soc->ttgs[i], tz);
+ }
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(tegra_soctherm_pm, soctherm_suspend, soctherm_resume);
+
static struct platform_driver tegra_soctherm_driver = {
.probe = tegra_soctherm_probe,
.remove = tegra_soctherm_remove,
.driver = {
.name = "tegra_soctherm",
+ .pm = &tegra_soctherm_pm,
.of_match_table = tegra_soctherm_of_match,
},
};
--
1.9.1
next prev parent reply other threads:[~2016-03-29 10:34 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-29 10:29 [PATCH V9 RESEND 00/14] Add T210 support in Tegra soctherm Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 02/14] thermal: tegra: combine sensor group-related data Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 03/14] thermal: tegra: get rid of PDIV/HOTSPOT hack Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 04/14] thermal: tegra: split tegra_soctherm driver Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 05/14] thermal: tegra: add Tegra210 specific SOC_THERM driver Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 08/14] of: add notes of critical trips for soctherm Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 09/14] thermal: tegra: add thermtrip function Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 10/14] thermal: tegra: handle clocks in one function Wei Ni
2016-03-29 10:29 ` Wei Ni [this message]
2016-03-29 10:29 ` [PATCH V9 RESEND 14/14] arm: tegra: set critical trips for Tegra124 Wei Ni
2016-03-29 15:17 ` Eduardo Valentin
[not found] ` <20160329151705.GC1855-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2016-04-01 7:04 ` Wei Ni
2016-04-12 8:53 ` Wei Ni
2016-03-30 10:30 ` Wei Ni
2016-03-29 10:36 ` [PATCH V9 RESEND 00/14] Add T210 support in Tegra soctherm Wei Ni
2016-03-29 15:13 ` Eduardo Valentin
[not found] ` <1459247364-1139-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-03-29 10:29 ` [PATCH V9 RESEND 01/14] thermal: tegra: move tegra thermal files into tegra directory Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 06/14] thermal: tegra: add a debugfs to show registers Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 07/14] thermal: of-thermal: allow setting trip_temp on hardware Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 11/14] thermal: tegra: handle HW initialization in one funcotion Wei Ni
2016-03-29 10:29 ` [PATCH V9 RESEND 13/14] arm64: tegra: add soctherm node for Tegra210 Wei Ni
[not found] ` <1459247364-1139-14-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-03-29 15:16 ` Eduardo Valentin
2016-03-30 3:24 ` Wei Ni
[not found] ` <56FB4703.7020201-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-03-30 10:28 ` Wei Ni
2016-04-01 7:01 ` Wei Ni
2016-04-12 8:53 ` Wei Ni
[not found] ` <570CB781.8040208-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-04-26 3:36 ` Wei Ni
2016-05-03 9:29 ` Wei Ni
2016-03-29 15:18 ` [PATCH V9 RESEND 00/14] Add T210 support in Tegra soctherm Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459247364-1139-13-git-send-email-wni@nvidia.com \
--to=wni@nvidia.com \
--cc=MLongnecker@nvidia.com \
--cc=edubezval@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mikko.perttunen@kapsi.fi \
--cc=rui.zhang@intel.com \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).