From: Rajendra Nayak <rnayak@codeaurora.org>
To: edubezval@gmail.com, andy.gross@linaro.org
Cc: linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, rui.zhang@intel.com,
sboyd@codeaurora.org, nrajan@codeaurora.org,
lina.iyer@linaro.org, punit.agrawal@arm.com,
Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v6 00/11] qcom: Add support for TSENS driver
Date: Thu, 5 May 2016 14:21:38 +0530 [thread overview]
Message-ID: <1462438309-11196-1-git-send-email-rnayak@codeaurora.org> (raw)
Current set of patches apply on 4.6-rc6. Fixes for the nvmem apis
are now posted [1] and queued in -next [2]
Patches [1-6] will need to be merged via thermal tree/Eduardo.
Patches [7-11] will need to go via qcom-msm tree/Andy.
Changes since v5:
* Minor review fixes from Eduardo
Changes since v4:
* dropped qcom,tsens-slopes binding, used coefficients instead
* dropped qcom,sensor-id binding
* Added support for msm8996 family
* Other minor review fixes from v4
Changes since v3:
* Dropped 'clk: qcom: create virtual child device for TSENS' which
is picked up by Stephen
* Updated GCC bindings with optional TSENS properties
Changes since v2:
* Minor review fixes from Stephen/Punit and rebase on 4.3-rc4
Changes since v1:
* Created virtual tsens device from gcc driver for 8960,
with DT having a single node for gcc and tsens
* Minor fixes with rebasing on 4.3-rc1
Changes since RFC:
* Added support for 8916 and 8084
* Based off the latest nvmem framework patches [1]
* Minor review fixes for comments mostly from Lina
This is an attempt to have a single TSENS driver for
the different versions of the TSENS IP that exist, on
different qcom msm/apq SoCs'
Support is added for msm8916, msm8960, msm8974 and msm8996 families.
A lot of the work is based of original code from Stephen Boyd
and Siddartha Mohanadoss. I have also picked some of what
Narendran Rajan did in his attempt to upstream the support
for 8960 family. I could not keep the original authorship on
any of the patches because I ended up moving the code around
quite a bit in an effort to have a single driver for the
various devices. I would be glad to change the authorship
for any of the patches if needed.
[1] https://lkml.org/lkml/2016/4/24/103
[2] git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git char-misc-next
Rajendra Nayak (11):
thermal: qcom: tsens: Add a skeletal TSENS drivers
thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
thermal: core: export apis to get slope and offset
thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
thermal: qcom: tsens-8996: Add support for 8996 family of SoCs
arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes
arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes
arm64: dts: msm8916: Add thermal zones, tsens and qfprom nodes
arm64: dts: msm8996: Add thermal zones, tsens and qfprom nodes
.../devicetree/bindings/clock/qcom,gcc.txt | 18 ++
.../devicetree/bindings/thermal/qcom-tsens.txt | 21 ++
Documentation/thermal/sysfs-api.txt | 12 +
arch/arm/boot/dts/qcom-apq8064.dtsi | 103 ++++++++
arch/arm/boot/dts/qcom-apq8084.dtsi | 103 ++++++++
arch/arm/boot/dts/qcom-msm8974.dtsi | 103 ++++++++
arch/arm64/boot/dts/qcom/msm8916.dtsi | 64 +++++
arch/arm64/boot/dts/qcom/msm8996.dtsi | 92 +++++++
drivers/thermal/Kconfig | 5 +
drivers/thermal/Makefile | 1 +
drivers/thermal/qcom/Kconfig | 11 +
drivers/thermal/qcom/Makefile | 2 +
drivers/thermal/qcom/tsens-8916.c | 113 ++++++++
drivers/thermal/qcom/tsens-8960.c | 292 +++++++++++++++++++++
drivers/thermal/qcom/tsens-8974.c | 244 +++++++++++++++++
drivers/thermal/qcom/tsens-8996.c | 84 ++++++
drivers/thermal/qcom/tsens-common.c | 141 ++++++++++
drivers/thermal/qcom/tsens.c | 200 ++++++++++++++
drivers/thermal/qcom/tsens.h | 92 +++++++
drivers/thermal/thermal_core.c | 30 +++
include/linux/thermal.h | 8 +
21 files changed, 1739 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
create mode 100644 drivers/thermal/qcom/Kconfig
create mode 100644 drivers/thermal/qcom/Makefile
create mode 100644 drivers/thermal/qcom/tsens-8916.c
create mode 100644 drivers/thermal/qcom/tsens-8960.c
create mode 100644 drivers/thermal/qcom/tsens-8974.c
create mode 100644 drivers/thermal/qcom/tsens-8996.c
create mode 100644 drivers/thermal/qcom/tsens-common.c
create mode 100644 drivers/thermal/qcom/tsens.c
create mode 100644 drivers/thermal/qcom/tsens.h
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next reply other threads:[~2016-05-05 8:52 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-05 8:51 Rajendra Nayak [this message]
2016-05-05 8:51 ` [PATCH v6 01/11] thermal: qcom: tsens: Add a skeletal TSENS drivers Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 02/11] thermal: qcom: tsens-8916: Add support for 8916 family of SoCs Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 03/11] thermal: qcom: tsens-8974: Add support for 8974 " Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 04/11] thermal: core: export apis to get slope and offset Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 05/11] thermal: qcom: tsens-8960: Add support for 8960 family of SoCs Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 06/11] thermal: qcom: tsens-8996: Add support for 8996 " Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 07/11] arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes Rajendra Nayak
2016-07-02 1:19 ` Eduardo Valentin
2016-05-05 8:51 ` [PATCH v6 08/11] arm: dts: apq8064: " Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 09/11] arm: dts: apq8084: " Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 10/11] arm64: dts: msm8916: " Rajendra Nayak
2016-05-05 8:51 ` [PATCH v6 11/11] arm64: dts: msm8996: " Rajendra Nayak
2016-06-10 6:02 ` [PATCH v6 00/11] qcom: Add support for TSENS driver Rajendra Nayak
2016-06-17 5:59 ` Nayak, Rajendra
2016-06-30 4:25 ` Rajendra Nayak
2016-07-01 20:52 ` Eduardo Valentin
2016-07-02 1:23 ` Eduardo Valentin
2016-07-04 8:04 ` Nayak, Rajendra
2016-07-28 8:33 ` Zhang Rui
2016-07-28 8:55 ` Zhang Rui
2016-08-09 3:51 ` Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462438309-11196-1-git-send-email-rnayak@codeaurora.org \
--to=rnayak@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=edubezval@gmail.com \
--cc=lina.iyer@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=nrajan@codeaurora.org \
--cc=punit.agrawal@arm.com \
--cc=rui.zhang@intel.com \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).