From: Eduardo Valentin <edubezval@gmail.com>
To: Rui Zhang <rui.zhang@intel.com>
Cc: Linux PM <linux-pm@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>,
Eduardo Valentin <edubezval@gmail.com>
Subject: [PATCHv2 31/40] thermal: core: move bind_cdev() to where it is used
Date: Mon, 30 May 2016 14:27:50 -0700 [thread overview]
Message-ID: <1464643679-2733-32-git-send-email-edubezval@gmail.com> (raw)
In-Reply-To: <1464643679-2733-1-git-send-email-edubezval@gmail.com>
Moving the helper to closer where it is used.
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
---
drivers/thermal/thermal_core.c | 76 +++++++++++++++++++++---------------------
1 file changed, 38 insertions(+), 38 deletions(-)
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 75b7854..e0ebf9f 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -319,44 +319,6 @@ static void __bind(struct thermal_zone_device *tz, int mask,
}
}
-static void bind_cdev(struct thermal_cooling_device *cdev)
-{
- int i, ret;
- const struct thermal_zone_params *tzp;
- struct thermal_zone_device *pos = NULL;
-
- mutex_lock(&thermal_list_lock);
-
- list_for_each_entry(pos, &thermal_tz_list, node) {
- if (!pos->tzp && !pos->ops->bind)
- continue;
-
- if (pos->ops->bind) {
- ret = pos->ops->bind(pos, cdev);
- if (ret)
- print_bind_err_msg(pos, cdev, ret);
- continue;
- }
-
- tzp = pos->tzp;
- if (!tzp || !tzp->tbp)
- continue;
-
- for (i = 0; i < tzp->num_tbps; i++) {
- if (tzp->tbp[i].cdev || !tzp->tbp[i].match)
- continue;
- if (tzp->tbp[i].match(pos, cdev))
- continue;
- tzp->tbp[i].cdev = cdev;
- __bind(pos, tzp->tbp[i].trip_mask, cdev,
- tzp->tbp[i].binding_limits,
- tzp->tbp[i].weight);
- }
- }
-
- mutex_unlock(&thermal_list_lock);
-}
-
static void bind_tz(struct thermal_zone_device *tz)
{
int i, ret;
@@ -882,6 +844,44 @@ static struct class thermal_class = {
.dev_release = thermal_release,
};
+static void bind_cdev(struct thermal_cooling_device *cdev)
+{
+ int i, ret;
+ const struct thermal_zone_params *tzp;
+ struct thermal_zone_device *pos = NULL;
+
+ mutex_lock(&thermal_list_lock);
+
+ list_for_each_entry(pos, &thermal_tz_list, node) {
+ if (!pos->tzp && !pos->ops->bind)
+ continue;
+
+ if (pos->ops->bind) {
+ ret = pos->ops->bind(pos, cdev);
+ if (ret)
+ print_bind_err_msg(pos, cdev, ret);
+ continue;
+ }
+
+ tzp = pos->tzp;
+ if (!tzp || !tzp->tbp)
+ continue;
+
+ for (i = 0; i < tzp->num_tbps; i++) {
+ if (tzp->tbp[i].cdev || !tzp->tbp[i].match)
+ continue;
+ if (tzp->tbp[i].match(pos, cdev))
+ continue;
+ tzp->tbp[i].cdev = cdev;
+ __bind(pos, tzp->tbp[i].trip_mask, cdev,
+ tzp->tbp[i].binding_limits,
+ tzp->tbp[i].weight);
+ }
+ }
+
+ mutex_unlock(&thermal_list_lock);
+}
+
/**
* __thermal_cooling_device_register() - register a new thermal cooling device
* @np: a pointer to a device tree node.
--
2.1.4
next prev parent reply other threads:[~2016-05-30 21:27 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-30 21:27 [PATCHv2 00/40] Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 01/40] thermal: core: prevent zones with no types to be registered Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 02/40] thermal: core: group thermal_zone DEVICE_ATTR's declarations Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 03/40] thermal: core: group device_create_file() calls that are always created Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 04/40] thermal: core: use dev.groups to manage always present tz attributes Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 05/40] thermal: core: move emul_temp creation to tz->device.groups Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 06/40] thermal: core: move mode attribute " Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 07/40] thermal: core: move passive attr " Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 08/40] thermal: core: improve power actor documentation Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 09/40] thermal: core: move power actor code out of sysfs I/F section Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 10/40] thermal: core: remove useless empty line Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 11/40] thermal: core: fix style on remove_trip_attrs() Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 12/40] thermal: core: move the trip attrs to the tz sysfs I/F section Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 13/40] thermal: core: create tz->device.groups dynamically Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 14/40] thermal: core: move trips attributes to tz->device.groups Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 15/40] thermal: core: remove unnecessary device_remove() calls Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 16/40] thermal: core: split passive_store Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 17/40] thermal: core: split policy_store Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 18/40] thermal: core: split available_policies_show() Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 19/40] thermal: core: move to_thermal_zone() macro to header file Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 20/40] thermal: core: treat correctly the return value of *scanf calls Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 21/40] thermal: core: match parenthesis on code alignment Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 22/40] thermal: core: move thermal_zone sysfs to thermal_sysfs.c Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 23/40] thermal: core: move to_cooling_device macro to header file Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 24/40] thermal: core: move cooling device sysfs to thermal_sysfs.c Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 25/40] thermal: core: remove a couple of style issues on helpers Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 26/40] thermal: core: introduce thermal_helpers.c Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 27/40] thermal: core: group functions related to governor handling Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 28/40] thermal: core: move idr handling to device management section Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 29/40] thermal: core: small style fix on __unbind() helper Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 30/40] thermal: core: move __unbind() helper to where it is used Eduardo Valentin
2016-05-30 21:27 ` Eduardo Valentin [this message]
2016-05-30 21:27 ` [PATCHv2 32/40] thermal: core: move bind_tz() " Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 33/40] thermal: core: fix couple of style issues on __bind() helper Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 34/40] thermal: core: move __bind() to where it is used Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 35/40] thermal: core: add inline to print_bind_err_msg() Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 36/40] thermal: core: move notify to the zone update section Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 37/40] thermal: core: add a comment describing the main update loop Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 38/40] thermal: core: add a comment describing the power actor section Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 39/40] thermal: core: add a comment describing the device management section Eduardo Valentin
2016-05-30 21:27 ` [PATCHv2 40/40] thermal: sysfs: remove symbols of emul_temp when config is disabled Eduardo Valentin
2016-05-30 22:16 ` [PATCHv2 00/40] Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464643679-2733-32-git-send-email-edubezval@gmail.com \
--to=edubezval@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).