From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eduardo Valentin Subject: [PATCHv4 08/48] thermal: core: improve power actor documentation Date: Mon, 30 May 2016 23:18:15 -0700 Message-ID: <1464675535-2433-9-git-send-email-edubezval@gmail.com> References: <1464675535-2433-1-git-send-email-edubezval@gmail.com> Return-path: In-Reply-To: <1464675535-2433-1-git-send-email-edubezval@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: Rui Zhang Cc: Linux PM , LKML , Keerthy , Eduardo Valentin List-Id: linux-pm@vger.kernel.org Simple improvement on clarity and removal of checkpatch warning in the documentation of power actor kernel doc. Cc: Zhang Rui Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin --- drivers/thermal/thermal_core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index efc190c..a05a293 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -1145,12 +1145,13 @@ int power_actor_get_min_power(struct thermal_cooling_device *cdev, } /** - * power_actor_set_power() - limit the maximum power that a cooling device can consume + * power_actor_set_power() - limit the maximum power a cooling device consumes * @cdev: pointer to &thermal_cooling_device * @instance: thermal instance to update * @power: the power in milliwatts * - * Set the cooling device to consume at most @power milliwatts. + * Set the cooling device to consume at most @power milliwatts. The limit is + * expected to be a cap at the maximum power consumption. * * Return: 0 on success, -EINVAL if the cooling device does not * implement the power actor API or -E* for other failures. -- 2.1.4