linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eduardo Valentin <edubezval@gmail.com>
To: Rui Zhang <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Len Brown <lenb@kernel.org>,
	linux-acpi@vger.kernel.org, "Lee, Chun-Yi" <jlee@suse.com>,
	Darren Hart <dvhart@infradead.org>, Keerthy <j-keerthy@ti.com>,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	platform-driver-x86@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [PATCH 1/1] thermal: core: call thermal_zone_device_update() after mode update
Date: Tue, 21 Jun 2016 22:06:30 -0700	[thread overview]
Message-ID: <1466571990-12346-1-git-send-email-edubezval@gmail.com> (raw)
In-Reply-To: <1466563538.2471.10.camel@intel.com>

Because several drivers do the following pattern:
.set_mode()
   ...
   local_data->mode = new_mode;
   thermal_zone_device_update(tz);

makes sense to simply do the thermal_zone_device_update()
in thermal core, after setting the new mode.

Also, this patch also remove deadlocks on drivers that
call thermal_zone_device_update() on .set_mode(),
as .set_mode()  is now called always with tz->lock held.

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
---
Rui, Keerthy,

I think this patch should take care of the introduced deadlock.

Let me know if solves on your end.

BR,

Eduardo
---

 drivers/acpi/thermal.c                             |  2 --
 drivers/platform/x86/acerhdf.c                     |  1 -
 drivers/thermal/imx_thermal.c                      |  1 -
 drivers/thermal/of-thermal.c                       |  8 ++---
 drivers/thermal/thermal_core.c                     | 41 +++++++++++++++++-----
 drivers/thermal/thermal_sysfs.c                    |  1 +
 drivers/thermal/ti-soc-thermal/ti-thermal-common.c |  1 -
 7 files changed, 36 insertions(+), 19 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 82707f9..8582b88 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -519,8 +519,6 @@ static void acpi_thermal_check(void *data)
 
 	if (!tz->tz_enabled)
 		return;
-
-	thermal_zone_device_update(tz->thermal_zone);
 }
 
 /* sys I/F for generic thermal sysfs support */
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 460fa67..aee33ba 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -405,7 +405,6 @@ static inline void acerhdf_enable_kernelmode(void)
 	kernelmode = 1;
 
 	thz_dev->polling_delay = interval*1000;
-	thermal_zone_device_update(thz_dev);
 	pr_notice("kernel mode fan control ON\n");
 }
 
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index c5547bd..a413eb6 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -246,7 +246,6 @@ static int imx_set_mode(struct thermal_zone_device *tz,
 	}
 
 	data->mode = mode;
-	thermal_zone_device_update(tz);
 
 	return 0;
 }
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index b8e509c..b44c102 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -181,9 +181,6 @@ static int of_thermal_set_emul_temp(struct thermal_zone_device *tz,
 {
 	struct __thermal_zone *data = tz->devdata;
 
-	if (!data->ops || !data->ops->set_emul_temp)
-		return -EINVAL;
-
 	return data->ops->set_emul_temp(data->sensor_data, temp);
 }
 
@@ -292,7 +289,6 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz,
 	mutex_unlock(&tz->lock);
 
 	data->mode = mode;
-	thermal_zone_device_update(tz);
 
 	return 0;
 }
@@ -427,7 +423,9 @@ thermal_zone_of_add_sensor(struct device_node *zone,
 
 	tzd->ops->get_temp = of_thermal_get_temp;
 	tzd->ops->get_trend = of_thermal_get_trend;
-	tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
+	if (ops->set_emul_temp)
+		tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
+
 	mutex_unlock(&tzd->lock);
 
 	return tzd;
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 09da955..bb1ede7 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -323,6 +323,21 @@ static void handle_non_critical_trips(struct thermal_zone_device *tz,
 		       def_governor->throttle(tz, trip);
 }
 
+static void thermal_zone_update_stats(struct thermal_zone_device *tz,
+				      int last_trip, int cur_trip)
+{
+	unsigned long long cur_time = get_jiffies_64();
+	struct thermal_zone_stats *cur, *last;
+
+	cur = tz->stats_table[cur_trip];
+	last = tz->stats_table[last_trip];
+
+	cur->counter++;
+	cur->last_time = cur_time;
+
+	last->time_in += cur_time - last->last_time;
+}
+
 static void thermal_tripped_notify(struct thermal_zone_device *tz,
 				   int trip, enum thermal_trip_type trip_type,
 				   int trip_temp)
@@ -333,6 +348,7 @@ static void thermal_tripped_notify(struct thermal_zone_device *tz,
 			NULL };
 	int upper_trip_hyst, upper_trip_temp, trip_hyst = 0;
 	int ret = 0;
+	int cur_trip, last_trip;
 
 	snprintf(tuv_name, sizeof(tuv_name), "THERMAL_ZONE=%s", tz->type);
 	snprintf(tuv_temp, sizeof(tuv_temp), "TEMP=%d", tz->temperature);
@@ -344,8 +360,11 @@ static void thermal_tripped_notify(struct thermal_zone_device *tz,
 	mutex_lock(&tz->lock);
 
 	/* crossing up */
-	if (tz->last_temperature < trip_temp && trip_temp < tz->temperature)
+	if (tz->last_temperature < trip_temp && trip_temp < tz->temperature) {
 		kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, msg);
+		last_trip = trip - 1;
+		cur_trip = trip;
+	}
 
 	if (tz->ops->get_trip_hyst)
 		tz->ops->get_trip_hyst(tz, trip, &trip_hyst);
@@ -355,6 +374,8 @@ static void thermal_tripped_notify(struct thermal_zone_device *tz,
 	if (tz->last_temperature > trip_temp && trip_temp > tz->temperature) {
 		snprintf(tuv_trip, sizeof(tuv_trip), "TRIP=%d", trip - 1);
 		kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, msg);
+		last_trip = trip;
+		cur_trip = trip - 1;
 	}
 
 	ret = tz->ops->get_trip_temp(tz, trip + 1, &upper_trip_temp);
@@ -369,19 +390,15 @@ static void thermal_tripped_notify(struct thermal_zone_device *tz,
 	    upper_trip_temp > tz->temperature)
 		kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, msg);
 
+	thermal_zone_device_update_stats(tz, last_trip, cur_trip);
 unlock:
 	mutex_unlock(&tz->lock);
 }
 
 static void handle_critical_trips(struct thermal_zone_device *tz,
-				  int trip, enum thermal_trip_type trip_type)
+				  int trip, enum thermal_trip_type trip_type,
+				  int trip_temp)
 {
-	int trip_temp;
-
-	tz->ops->get_trip_temp(tz, trip, &trip_temp);
-
-	thermal_tripped_notify(tz, trip, trip_type, trip_temp);
-
 	/* If we have not crossed the trip_temp, we do not care. */
 	if (trip_temp <= 0 || tz->temperature < trip_temp)
 		return;
@@ -402,15 +419,21 @@ static void handle_critical_trips(struct thermal_zone_device *tz,
 static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
 {
 	enum thermal_trip_type type;
+	int trip_temp;
+
+	tz->ops->get_trip_temp(tz, trip, &trip_temp);
 
 	/* Ignore disabled trip points */
 	if (test_bit(trip, &tz->trips_disabled))
 		return;
 
 	tz->ops->get_trip_type(tz, trip, &type);
+	tz->ops->get_trip_type(tz, trip, &trip_temp);
+
+	thermal_tripped_notify(tz, trip, trip_type, trip_temp);
 
 	if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)
-		handle_critical_trips(tz, trip, type);
+		handle_critical_trips(tz, trip, type, trip_temp);
 	else
 		handle_non_critical_trips(tz, trip, type);
 }
diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
index 743df50..3d0dc30 100644
--- a/drivers/thermal/thermal_sysfs.c
+++ b/drivers/thermal/thermal_sysfs.c
@@ -100,6 +100,7 @@ mode_store(struct device *dev, struct device_attribute *attr,
 	mutex_lock(&tz->lock);
 	result = tz->ops->set_mode(tz, mode);
 	mutex_unlock(&tz->lock);
+	thermal_zone_device_update(tz);
 
 	if (result)
 		return result;
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 15c0a9a..9a5a3a3 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -205,7 +205,6 @@ static int ti_thermal_set_mode(struct thermal_zone_device *thermal,
 	data->mode = mode;
 	ti_bandgap_write_update_interval(bgp, data->sensor_id,
 					data->ti_thermal->polling_delay);
-	thermal_zone_device_update(data->ti_thermal);
 	dev_dbg(&thermal->device, "thermal polling set for duration=%d msec\n",
 		data->ti_thermal->polling_delay);
 
-- 
2.1.4

  reply	other threads:[~2016-06-22  5:06 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-31  6:31 [PATCH 00/15] thermal: sysfs: add locking Eduardo Valentin
2016-05-31  6:31 ` [PATCH 01/15] thermal: sysfs: lock tz in type_show Eduardo Valentin
2016-05-31  6:31 ` [PATCH 02/15] thermal: sysfs: lock tz while on access to mode properties Eduardo Valentin
2016-06-07  9:08   ` Keerthy
2016-06-07  9:22     ` Keerthy
2016-06-22  2:45       ` Zhang Rui
2016-06-22  5:06         ` Eduardo Valentin [this message]
2016-06-23 12:27           ` [PATCH 1/1] thermal: core: call thermal_zone_device_update() after mode update Rafael J. Wysocki
2016-06-23 12:37             ` Keerthy
2016-07-01 20:53             ` Eduardo Valentin
2016-06-22  5:15         ` [PATCHv2 " Eduardo Valentin
2016-06-22  9:33           ` Keerthy
2016-06-22 14:36             ` Eduardo Valentin
2016-06-22 15:05               ` Eduardo Valentin
2016-06-22 14:34         ` [PATCHv3 " Eduardo Valentin
2016-06-22 15:03         ` [PATCHv4 " Eduardo Valentin
2016-06-23  4:38           ` Keerthy
2016-06-23  4:51           ` Darren Hart
2016-06-29  6:23           ` Zhang Rui
2016-07-01 20:57             ` Eduardo Valentin
2016-07-03  9:03           ` Peter Feuerer
2016-07-02  2:49   ` [PATCHv2 1/1] thermal: sysfs: lock tz while on access to mode properties Eduardo Valentin
2016-05-31  6:31 ` [PATCH 03/15] thermal: sysfs: lock tz while on trip_point_type properties Eduardo Valentin
2016-05-31  6:31 ` [PATCH 04/15] thermal: sysfs: lock tz while on trip_point_temp properties Eduardo Valentin
2016-05-31  6:31 ` [PATCH 05/15] thermal: sysfs: lock tz while on trip_point_hyst properties Eduardo Valentin
2016-05-31  6:31 ` [PATCH 06/15] thermal: sysfs: lock tz while on passive properties Eduardo Valentin
2016-05-31  6:31 ` [PATCH 07/15] thermal: sysfs: lock tz while on policy properties Eduardo Valentin
2016-05-31  6:31 ` [PATCH 08/15] thermal: sysfs: improve locking of emul_temp_store() Eduardo Valentin
2016-05-31  6:31 ` [PATCH 09/15] thermal: sysfs: lock tz when access sustainable power properties Eduardo Valentin
2016-05-31  6:31 ` [PATCH 10/15] thermal: sysfs: lock tz when access tzp properties Eduardo Valentin
2016-05-31  6:31 ` [PATCH 11/15] thermal: sysfs: lock cdev while accessing type Eduardo Valentin
2016-05-31  6:31 ` [PATCH 12/15] thermal: sysfs: lock cdev while accessing max_state Eduardo Valentin
2016-05-31  6:31 ` [PATCH 13/15] thermal: sysfs: lock cdev while accessing cur_state Eduardo Valentin
2016-05-31  6:31 ` [PATCH 14/15] thermal: sysfs: serialize access to instances Eduardo Valentin
2016-05-31  6:31 ` [PATCH 15/15] thermal: sysfs: add comments describing locking strategy Eduardo Valentin
2016-06-01  3:56 ` [PATCH 00/15] thermal: sysfs: add locking Keerthy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1466571990-12346-1-git-send-email-edubezval@gmail.com \
    --to=edubezval@gmail.com \
    --cc=dvhart@infradead.org \
    --cc=j-keerthy@ti.com \
    --cc=jlee@suse.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).