From: Phil Reid <preid@electromag.com.au>
To: sre@kernel.org, dbaryshkov@gmail.com, dwmw2@infradead.org,
linux-pm@vger.kernel.org
Cc: Phil Reid <preid@electromag.com.au>
Subject: [PATCH v2 4/4] power: sbs-battery: Use gpio_desc and sleeping calls for battery detect
Date: Mon, 25 Jul 2016 10:43:00 +0800 [thread overview]
Message-ID: <1469414580-14121-5-git-send-email-preid@electromag.com.au> (raw)
In-Reply-To: <1469414580-14121-1-git-send-email-preid@electromag.com.au>
Switch to using new gpio_desc interface and devm gpio get calls to
automatically manage gpio resource. Use gpiod_get_value which handles
active high / low calls.
If gpio_detect is set then force loading of the driver as it is
reasonable to assume that the battery may not be present.
Update the is_present flag immediately in the IRQ.
Signed-off-by: Phil Reid <preid@electromag.com.au>
---
drivers/power/sbs-battery.c | 122 +++++++++++++++++++++-----------------------
1 file changed, 59 insertions(+), 63 deletions(-)
diff --git a/drivers/power/sbs-battery.c b/drivers/power/sbs-battery.c
index 31f3e33..c05bec4 100644
--- a/drivers/power/sbs-battery.c
+++ b/drivers/power/sbs-battery.c
@@ -160,7 +160,7 @@ struct sbs_info {
struct power_supply *power_supply;
struct sbs_platform_data *pdata;
bool is_present;
- bool gpio_detect;
+ struct gpio_desc *gpio_detect;
bool enable_detection;
int last_state;
int poll_time;
@@ -301,13 +301,11 @@ static int sbs_get_battery_presence_and_health(
s32 ret;
struct sbs_info *chip = i2c_get_clientdata(client);
- if (psp == POWER_SUPPLY_PROP_PRESENT &&
- chip->gpio_detect) {
- ret = gpio_get_value(chip->pdata->battery_detect);
- if (ret == chip->pdata->battery_detect_present)
- val->intval = 1;
- else
- val->intval = 0;
+ if (psp == POWER_SUPPLY_PROP_PRESENT && chip->gpio_detect) {
+ ret = gpiod_get_value_cansleep(chip->gpio_detect);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
chip->is_present = val->intval;
return ret;
}
@@ -662,7 +660,12 @@ static irqreturn_t sbs_irq(int irq, void *devid)
{
struct sbs_info *chip = devid;
struct power_supply *battery = chip->power_supply;
+ int ret;
+ ret = gpiod_get_value_cansleep(chip->gpio_detect);
+ if (ret < 0)
+ return ret;
+ chip->is_present = ret;
power_supply_changed(battery);
return IRQ_HANDLED;
@@ -717,6 +720,31 @@ static void sbs_delayed_work(struct work_struct *work)
}
}
+static struct sbs_platform_data *sbs_populate_pdata(struct sbs_info *chip)
+{
+ struct i2c_client *client = chip->client;
+ struct sbs_platform_data *pdata = client->dev.platform_data;
+ int rc;
+ unsigned long flags = GPIOF_DIR_IN;
+
+ if (!gpio_is_valid(pdata->battery_detect))
+ return pdata;
+
+ if (!pdata->battery_detect_present)
+ set_bit(GPIOF_ACTIVE_LOW, &flags);
+
+ rc = devm_gpio_request_one(&client->dev, pdata->battery_detect,
+ flags, dev_name(&client->dev));
+ if (rc) {
+ dev_warn(&client->dev, "Failed to get gpio: %d\n", rc);
+ return pdata;
+ }
+
+ chip->gpio_detect = gpio_to_desc(pdata->battery_detect);
+
+ return pdata;
+}
+
#if defined(CONFIG_OF)
#include <linux/of_device.h>
@@ -729,12 +757,11 @@ static const struct of_device_id sbs_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, sbs_dt_ids);
-static struct sbs_platform_data *sbs_of_populate_pdata(
- struct i2c_client *client)
+static struct sbs_platform_data *sbs_of_populate_pdata(struct sbs_info *chip)
{
+ struct i2c_client *client = chip->client;
struct device_node *of_node = client->dev.of_node;
- struct sbs_platform_data *pdata = client->dev.platform_data;
- enum of_gpio_flags gpio_flags;
+ struct sbs_platform_data *pdata = NULL;
int rc;
u32 prop;
@@ -742,10 +769,6 @@ static struct sbs_platform_data *sbs_of_populate_pdata(
if (!of_node)
return NULL;
- /* if platform data is set, honor it */
- if (pdata)
- return pdata;
-
/* first make sure at least one property is set, otherwise
* it won't change behavior from running without pdata.
*/
@@ -757,7 +780,7 @@ static struct sbs_platform_data *sbs_of_populate_pdata(
pdata = devm_kzalloc(&client->dev, sizeof(struct sbs_platform_data),
GFP_KERNEL);
if (!pdata)
- goto of_out;
+ return ERR_PTR(-ENOMEM);
rc = of_property_read_u32(of_node, "sbs,i2c-retry-count", &prop);
if (!rc)
@@ -767,27 +790,22 @@ static struct sbs_platform_data *sbs_of_populate_pdata(
if (!rc)
pdata->poll_retry_count = prop;
- if (!of_get_property(of_node, "sbs,battery-detect-gpios", NULL)) {
- pdata->battery_detect = -1;
- goto of_out;
- }
-
- pdata->battery_detect = of_get_named_gpio_flags(of_node,
- "sbs,battery-detect-gpios", 0, &gpio_flags);
-
- if (gpio_flags & OF_GPIO_ACTIVE_LOW)
- pdata->battery_detect_present = 0;
- else
- pdata->battery_detect_present = 1;
+ chip->gpio_detect = devm_gpiod_get_optional(&client->dev,
+ "sbs,battery-detect", GPIOD_IN);
+ if (IS_ERR(chip->gpio_detect)) {
+ dev_err(&client->dev, "Failed to get gpio: %ld\n",
+ PTR_ERR(chip->gpio_detect));
+ return ERR_PTR(PTR_ERR(chip->gpio_detect));
+ }
of_out:
return pdata;
}
#else
static struct sbs_platform_data *sbs_of_populate_pdata(
- struct i2c_client *client)
+ struct sbs_info *client)
{
- return client->dev.platform_data;
+ return NULL;
}
#endif
@@ -825,7 +843,6 @@ static int sbs_probe(struct i2c_client *client,
chip->client = client;
chip->enable_detection = false;
- chip->gpio_detect = false;
psy_cfg.of_node = client->dev.of_node;
psy_cfg.drv_data = chip;
/* ignore first notification of external change, it is generated
@@ -834,38 +851,25 @@ static int sbs_probe(struct i2c_client *client,
chip->ignore_changes = 1;
chip->last_state = POWER_SUPPLY_STATUS_UNKNOWN;
- pdata = sbs_of_populate_pdata(client);
-
if (pdata) {
- chip->gpio_detect = gpio_is_valid(pdata->battery_detect);
- chip->pdata = pdata;
+ pdata = sbs_populate_pdata(chip);
+ } else {
+ pdata = sbs_of_populate_pdata(chip);
}
- i2c_set_clientdata(client, chip);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
- if (!chip->gpio_detect)
- goto skip_gpio;
+ chip->pdata = pdata;
- rc = gpio_request(pdata->battery_detect, dev_name(&client->dev));
- if (rc) {
- dev_warn(&client->dev, "Failed to request gpio: %d\n", rc);
- chip->gpio_detect = false;
- goto skip_gpio;
- }
+ i2c_set_clientdata(client, chip);
- rc = gpio_direction_input(pdata->battery_detect);
- if (rc) {
- dev_warn(&client->dev, "Failed to get gpio as input: %d\n", rc);
- gpio_free(pdata->battery_detect);
- chip->gpio_detect = false;
+ if (!chip->gpio_detect)
goto skip_gpio;
- }
- irq = gpio_to_irq(pdata->battery_detect);
+ irq = gpiod_to_irq(chip->gpio_detect);
if (irq <= 0) {
dev_warn(&client->dev, "Failed to get gpio as irq: %d\n", irq);
- gpio_free(pdata->battery_detect);
- chip->gpio_detect = false;
goto skip_gpio;
}
@@ -874,8 +878,6 @@ static int sbs_probe(struct i2c_client *client,
dev_name(&client->dev), chip);
if (rc) {
dev_warn(&client->dev, "Failed to request irq: %d\n", rc);
- gpio_free(pdata->battery_detect);
- chip->gpio_detect = false;
goto skip_gpio;
}
@@ -884,7 +886,7 @@ skip_gpio:
* Before we register, we might need to make sure we can actually talk
* to the battery.
*/
- if (!force_load) {
+ if (!(force_load || chip->gpio_detect)) {
rc = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
if (rc < 0) {
@@ -913,9 +915,6 @@ skip_gpio:
return 0;
exit_psupply:
- if (chip->gpio_detect)
- gpio_free(pdata->battery_detect);
-
return rc;
}
@@ -923,9 +922,6 @@ static int sbs_remove(struct i2c_client *client)
{
struct sbs_info *chip = i2c_get_clientdata(client);
- if (chip->gpio_detect)
- gpio_free(chip->pdata->battery_detect);
-
cancel_delayed_work_sync(&chip->work);
return 0;
--
1.8.3.1
next prev parent reply other threads:[~2016-07-25 2:43 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-25 2:42 [PATCH v2 0/4] power: sbs-battery fixup gpio detect irq handling Phil Reid
2016-07-25 2:42 ` [PATCH v2 1/4] power: sbs-battery: Use devm_kzalloc to alloc data Phil Reid
2016-07-25 2:42 ` [PATCH v2 2/4] power: sbs-battery: Request threaded irq and fix dev callback cookie Phil Reid
2016-07-25 2:42 ` [PATCH v2 3/4] power: sbs-battery: Use devm_power_supply_register Phil Reid
2016-07-25 2:43 ` Phil Reid [this message]
2016-07-30 23:37 ` [PATCH v2 4/4] power: sbs-battery: Use gpio_desc and sleeping calls for battery detect kbuild test robot
2016-07-31 0:14 ` kbuild test robot
2016-07-31 1:28 ` kbuild test robot
2016-08-15 21:08 ` Sebastian Reichel
2016-08-16 9:35 ` Phil Reid
2016-08-16 10:26 ` Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469414580-14121-5-git-send-email-preid@electromag.com.au \
--to=preid@electromag.com.au \
--cc=dbaryshkov@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).