From mboxrd@z Thu Jan 1 00:00:00 1970 From: Srinivas Pandruvada Subject: [PATCH v2 3/4] Documentation: intel_pstate: Update per core limits Date: Fri, 21 Oct 2016 09:14:25 -0700 Message-ID: <1477066466-22367-4-git-send-email-srinivas.pandruvada@linux.intel.com> References: <1477066466-22367-1-git-send-email-srinivas.pandruvada@linux.intel.com> Return-path: Received: from mga06.intel.com ([134.134.136.31]:11147 "EHLO mga06.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934840AbcJUQOj (ORCPT ); Fri, 21 Oct 2016 12:14:39 -0400 In-Reply-To: <1477066466-22367-1-git-send-email-srinivas.pandruvada@linux.intel.com> Sender: linux-pm-owner@vger.kernel.org List-Id: linux-pm@vger.kernel.org To: rjw@rjwysocki.net Cc: linux-pm@vger.kernel.org, Srinivas Pandruvada Document restriction on per core P-State control. Signed-off-by: Srinivas Pandruvada --- Documentation/cpu-freq/intel-pstate.txt | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/Documentation/cpu-freq/intel-pstate.txt b/Documentation/cpu-freq/intel-pstate.txt index 5528d6d..18156ce 100644 --- a/Documentation/cpu-freq/intel-pstate.txt +++ b/Documentation/cpu-freq/intel-pstate.txt @@ -48,7 +48,7 @@ In addition to the frequency-controlling interfaces provided by the cpufreq core, the driver provides its own sysfs files to control the P-State selection. These files have been added to /sys/devices/system/cpu/intel_pstate/. Any changes made to these files are applicable to all CPUs (even in a -multi-package system). +multi-package system, Refer to later section on placing "Per core limits"). max_perf_pct: Limits the maximum P-State that will be requested by the driver. It states it as a percentage of the available performance. The @@ -120,6 +120,27 @@ frequency is fictional for Intel Core processors. Even if the scaling driver selects a single P-State, the actual frequency the processor will run at is selected by the processor itself. +Per core limits + +Per core limits are not enabled without kernel command line + intel_pstate=per_cpu_perf_limits + +When user wants to control performance per core, there are some limitations +in sysfs control, which are described above. +- The following controls are not available for both read and write + /sys/devices/system/cpu/intel_pstate/max_perf_pct + /sys/devices/system/cpu/intel_pstate/min_perf_pct +- User can change limits using the following, respecting processor +architecture + /sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq + /sys/devices/system/cpu/cpu*/cpufreq/scaling_min_freq + /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor +- User can still observe turbo percent and number of P-States from + /sys/devices/system/cpu/intel_pstate/turbo_pct + /sys/devices/system/cpu/intel_pstate/num_pstates +- User can read write system wide turbo status + /sys/devices/system/cpu/no_turbo + Tuning Intel P-State driver When the performance can be tuned using PID (Proportional Integral -- 2.7.4