From: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org
Cc: linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
smbarber-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Subject: [PATCH v2 3/5] thermal: rockchip: fixes invalid temperature case
Date: Wed, 23 Nov 2016 22:29:32 +0800 [thread overview]
Message-ID: <1479911374-22006-4-git-send-email-wxt@rock-chips.com> (raw)
In-Reply-To: <1479911374-22006-1-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
The temp_to_code function will return 0 when we set the temperature to a
invalid value (e.g. 61C, 62C, 63C....), that's unpractical. This patch
will prevent this case happening. That will return the max analog value to
indicate the temperature is invalid or over table temperature range.
Signed-off-by: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
Changes in v2:
- As Brian commnets that restructure this to pass error codes back to the
upper layers.
- Improve the commit message.
Changes in v1: None
drivers/thermal/rockchip_thermal.c | 41 ++++++++++++++++++++++++++------------
1 file changed, 28 insertions(+), 13 deletions(-)
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 766486f..e243e40 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -120,9 +120,9 @@ struct rockchip_tsadc_chip {
/* Per-sensor methods */
int (*get_temp)(const struct chip_tsadc_table *table,
int chn, void __iomem *reg, int *temp);
- void (*set_alarm_temp)(const struct chip_tsadc_table *table,
+ int (*set_alarm_temp)(const struct chip_tsadc_table *table,
int chn, void __iomem *reg, int temp);
- void (*set_tshut_temp)(const struct chip_tsadc_table *table,
+ int (*set_tshut_temp)(const struct chip_tsadc_table *table,
int chn, void __iomem *reg, int temp);
void (*set_tshut_mode)(int chn, void __iomem *reg, enum tshut_mode m);
@@ -401,17 +401,15 @@ static u32 rk_tsadcv2_temp_to_code(const struct chip_tsadc_table *table,
int temp)
{
int high, low, mid;
- u32 error = 0;
+ u32 error = table->data_mask;
low = 0;
high = table->length - 1;
mid = (high + low) / 2;
/* Return mask code data when the temp is over table range */
- if (temp < table->id[low].temp || temp > table->id[high].temp) {
- error = table->data_mask;
+ if (temp < table->id[low].temp || temp > table->id[high].temp)
goto exit;
- }
while (low <= high) {
if (temp == table->id[mid].temp)
@@ -651,7 +649,7 @@ static int rk_tsadcv2_get_temp(const struct chip_tsadc_table *table,
return rk_tsadcv2_code_to_temp(table, val, temp);
}
-static void rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table,
+static int rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table,
int chn, void __iomem *regs, int temp)
{
u32 alarm_value, int_en;
@@ -659,7 +657,7 @@ static void rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table,
/* Make sure the value is valid */
alarm_value = rk_tsadcv2_temp_to_code(table, temp);
if (alarm_value == table->data_mask)
- return;
+ return -ERANGE;
writel_relaxed(alarm_value & table->data_mask,
regs + TSADCV2_COMP_INT(chn));
@@ -667,9 +665,11 @@ static void rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table,
int_en = readl_relaxed(regs + TSADCV2_INT_EN);
int_en |= TSADCV2_INT_SRC_EN(chn);
writel_relaxed(int_en, regs + TSADCV2_INT_EN);
+
+ return 0;
}
-static void rk_tsadcv2_tshut_temp(const struct chip_tsadc_table *table,
+static int rk_tsadcv2_tshut_temp(const struct chip_tsadc_table *table,
int chn, void __iomem *regs, int temp)
{
u32 tshut_value, val;
@@ -677,13 +677,15 @@ static void rk_tsadcv2_tshut_temp(const struct chip_tsadc_table *table,
/* Make sure the value is valid */
tshut_value = rk_tsadcv2_temp_to_code(table, temp);
if (tshut_value == table->data_mask)
- return;
+ return -ERANGE;
writel_relaxed(tshut_value, regs + TSADCV2_COMP_SHUT(chn));
/* TSHUT will be valid */
val = readl_relaxed(regs + TSADCV2_AUTO_CON);
writel_relaxed(val | TSADCV2_AUTO_SRC_EN(chn), regs + TSADCV2_AUTO_CON);
+
+ return 0;
}
static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
@@ -882,12 +884,17 @@ static int rockchip_thermal_set_trips(void *_sensor, int low, int high)
struct rockchip_thermal_sensor *sensor = _sensor;
struct rockchip_thermal_data *thermal = sensor->thermal;
const struct rockchip_tsadc_chip *tsadc = thermal->chip;
+ int ret;
dev_dbg(&thermal->pdev->dev, "%s: sensor %d: low: %d, high %d\n",
__func__, sensor->id, low, high);
- tsadc->set_alarm_temp(&tsadc->table,
+ ret = tsadc->set_alarm_temp(&tsadc->table,
sensor->id, thermal->regs, high);
+ if (ret)
+ dev_err(&thermal->pdev->dev,
+ "%s: disable sensor[%d] alarm temp: %d, ret: %d\n",
+ __func__, sensor->id, high, ret);
return 0;
}
@@ -985,8 +992,12 @@ rockchip_thermal_register_sensor(struct platform_device *pdev,
int error;
tsadc->set_tshut_mode(id, thermal->regs, thermal->tshut_mode);
- tsadc->set_tshut_temp(&tsadc->table, id, thermal->regs,
+
+ error = tsadc->set_tshut_temp(&tsadc->table, id, thermal->regs,
thermal->tshut_temp);
+ if (error)
+ dev_err(&pdev->dev, "%s: invalid tshut=%d, error=%d\n",
+ __func__, thermal->tshut_temp, error);
sensor->thermal = thermal;
sensor->id = id;
@@ -1199,9 +1210,13 @@ static int __maybe_unused rockchip_thermal_resume(struct device *dev)
thermal->chip->set_tshut_mode(id, thermal->regs,
thermal->tshut_mode);
- thermal->chip->set_tshut_temp(&thermal->chip->table,
+
+ error = thermal->chip->set_tshut_temp(&thermal->chip->table,
id, thermal->regs,
thermal->tshut_temp);
+ if (error)
+ dev_err(&pdev->dev, "%s: invalid tshut=%d, error=%d\n",
+ __func__, thermal->tshut_temp, error);
}
thermal->chip->control(thermal->regs, true);
--
2.7.4
next prev parent reply other threads:[~2016-11-23 14:29 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-23 14:29 [PATCH v2 0/5] thermal: fixes the rockchip thermal Caesar Wang
2016-11-23 14:29 ` [PATCH v2 2/5] thermal: rockchip: don't pass table structs by value Caesar Wang
[not found] ` <1479911374-22006-1-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-11-23 14:29 ` [PATCH v2 1/5] thermal: rockchip: improve conversion error messages Caesar Wang
2016-11-23 14:29 ` Caesar Wang [this message]
2016-11-23 18:35 ` [PATCH v2 3/5] thermal: rockchip: fixes invalid temperature case Brian Norris
2016-11-24 1:16 ` Caesar Wang
2016-11-23 14:29 ` [PATCH v2 4/5] thermal: rockchip: optimize the conversion table Caesar Wang
2016-11-23 14:29 ` [PATCH v2 5/5] thermal: rockchip: handle set_trips without the trip points Caesar Wang
2016-11-23 18:39 ` Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479911374-22006-4-git-send-email-wxt@rock-chips.com \
--to=wxt-tnx95d0mmh7dzftrwevzcw@public.gmane.org \
--cc=briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=smbarber-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).