From mboxrd@z Thu Jan 1 00:00:00 1970 From: Keerthy Subject: [PATCH v2 2/8] ARM: DRA7: Thermal: Add slope and offset values Date: Thu, 9 Mar 2017 13:35:56 +0530 Message-ID: <1489046762-11288-3-git-send-email-j-keerthy@ti.com> References: <1489046762-11288-1-git-send-email-j-keerthy@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1489046762-11288-1-git-send-email-j-keerthy@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: tony@atomide.com, edubezval@gmail.com Cc: rui.zhang@intel.com, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, robh+dt@kernel.org, t-kristo@ti.com, j-keerthy@ti.com List-Id: linux-pm@vger.kernel.org Currently the slope and offset values for calculating the hot spot temperature of a particular thermal zone is part of driver data. Pass them here instead and obtain the values while of node parsing. Signed-off-by: Keerthy --- arch/arm/boot/dts/dra7.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 2c9e56f..10e09dc 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1982,6 +1982,23 @@ &cpu_thermal { polling-delay = <500>; /* milliseconds */ + coefficients = <0 2000>; +}; + +&gpu_thermal { + coefficients = <0 2000>; +}; + +&core_thermal { + coefficients = <0 2000>; +}; + +&dspeve_thermal { + coefficients = <0 2000>; +}; + +&iva_thermal { + coefficients = <0 2000>; }; /include/ "dra7xx-clocks.dtsi" -- 1.9.1